Research and Development are integral to the activities at VŠB-TUO. Our focus on applied research and close cooperation with industry informs the teaching activities at the University, ensuring relevance in a dynamic international scientific environment. The fact that we are one of the most successful universities in the utilization of European structural funds focused on research is not a coincidence. We are utilizing our excellent position in six areas to develop science and research for the future through the Centre of Excellence IT for Innovations, and other top centres.

The strategy of science and research is based on six poles of excellence where we currently excel, and/or have the potential to excel in the future:

Raw materials, energy and environmental science
Computational sciences and information technologies
New materials, structures and technologies
Modern engineering
Safety technologies
Modelling of economic and financial processes

Publications

Article

LAMPARTOVÁ, Alžběta and Marek LAMPART. Exploring diverse trajectory patterns in nonlinear dynamic systems. Chaos, Solitons & Fractals. Shannon: Elsevier, 2024, 182(May), p. nestránkováno. ISSN 0960-0779. [Detail]

VONTOROVÁ, Jiřina, Petr MOHYLA and Kateřina KREISLOVÁ. Quality of Zinc Coating Formed on Structural Steel by Hot-Dip Galvanizing after Surface Contamination. Coatings. MDPI Open Access Publishing, 2024, 14(493), p. nestránkováno. ISSN 2079-6412. [Detail]

OLŠOVSKÁ, Eva, Miroslava LEHOTSKÁ MIKUŠOVÁ, Jana TULINSKÁ, Eva ROLLEROVÁ, Zuzana VILAMOVÁ, Aurélia LÍŠKOVÁ, Mira HORVÁTHOVÁ, Michaela SZABOVÁ, Ladislav SVOBODA, Roman GABOR, Jiří HAJNYŠ, Richard DVORSKÝ, Jana KUKUTSCHOVÁ and Norbert LUKÁN. Immunotoxicity of stainless-steel nanoparticles obtained after 3D printing. Ecotoxicology and environmental safety. Academic Press, Elsevier Science Inc, 2024, 272(March), p. nestránkováno. ISSN 0147-6513. [Detail]

BRŤKOVÁ, Hana, Jana RŮŽIČKOVÁ, Karolina SLAMOVÁ, Helena RACLAVSKÁ, Marek KUCBEL, Michal ŠAFÁŘ, Gigas PETROS, Dagmar JUCHELKOVÁ, Barbora ŠVÉDOVÁ and Šárka FLODROVÁ. Plastic particles in urban compost and their grain size distribution. Environmental Pollution. Elsevier, 2024, 2024(351), p. 124025. ISSN 0269-7491. [Detail]

ČESPIVA, Jakub, M. WNUKOWSKI, Jan SKŘÍNSKÝ, R PERESTRELO, Marek JADLOVEC, Jan VÝTISK, Martin TROJEK and J.S. CÂMARA. Production efficiency and safety assessment of the solid waste-derived liquid hydrocarbons. Environmental Research. San Diego: Academic Press, 2024, 244(12), p. nestránkováno. ISSN 0013-9351. [Detail]

HASLINGER, Jaroslav, Radek KUČERA, Kristina MOTYČKOVÁ and Václav ŠÁTEK. Stokes problem with the Coulomb stick–slip boundary conditions in 3D: formulations, approximation, algorithms, and experiments. Mathematics and computers in simulation. Elsevier Science, 2024, 216(February), p. 145-167. ISSN 0378-4754. [Detail]

ŠAVRNOCH, Zdenko, Milan SAPIETA, Vladimír DEKÝŠ, Petr FERFECKI, Jaroslav ZAPOMĚL, Alžbeta SAPIETOVÁ, Michal MOLČAN and Martin FUSEK. Probabilistic Analysis of Critical Speed Values of a Rotating Machine as a Function of the Change of Dynamic Parameters. Sensors. MDPI Open Access Publishing, 2024, 24(13), p. nestránkováno. ISSN 1424-3210. [Detail]

HRABOVSKÝ, Leopold, Tomáš MLČÁK and Oldřich UČEŇ. The compression force mechanism of the top belt of a conveyor belt. Trans. Gabriela CHUDAŠOVÁ. AIP Conference Proceedings. Volume 2997. AIP Publishing, 2023, 2928(1-2023), p. 1-9. ISSN 0094-243X. [Detail]

SUDER, Jiří, Jakub MLOTEK, Alan PANEC and František FOJTÍK. Design of Printing Parameter Settings Methodology for FFF Printing of Waterproof Samples from a Flexible Material. Acta Mechanica Slovaca. Technická univerzita Košice, 2023, 27(1), p. 58-64. ISSN 1335-2393. [Detail]

GARUS, Sebastian, Wojciech SOCHACKI, Justyna GARUS, Michal ŠOFER, Pavel ŠOFER and Konrad GRUSZKA. Influence of Meta-Atom Geometry on the Occurrence of Local Resonance Regions in Two-Dimensional Finite Phononic Structures. Acta Physica Polonica A. Zabrze: Polish Academy of Sciences, 2023, 144(5), p. 308-312. ISSN 0587-4246. [Detail]

GNATOWSKA, R., K. GAJEWSKA and Tomáš BLEJCHAŘ. Study of Airfoil Flow Control with Microcylinders Using Optical Method. Acta Physica Polonica A. Zabrze: Polish Academy of Sciences, 2023, 144(5), p. 406-409. ISSN 0587-4246. [Detail]

PRIYADARSHINI, Jayaraju, Mariappan PREMALATHA, Robert ČEP, Murugan JAYASUDHA and Kanak KALITA. Analyzing Physics-Inspired Metaheuristic Algorithms in Feature Selection with K-Nearest-Neighbor. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(2), p. nestránkováno. ISSN 2076-3417. [Detail]

GANESH, Narayanan, Rajendran SHANKAR, Robert ČEP, Shankar CHAKRABORTY and Kanak KALITA. Efficient Feature Selection Using Weighted Superposition Attraction Optimization Algorithm. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(5), p. nestránkováno. ISSN 2076-3417. [Detail]

ČEPOVÁ, Lenka, Robert ČEP, Leszek CHALKO, Stepanka DVORACKOVA, Miroslav TROCHTA, Miroslaw RUCKI, Libor BERANEK, Ondřej MIZERA and Volodymyr CHYSHKALA. The Effect of Cutting Tool Geometry on Surface Integrity: A Case Study of CBN Tools and the Inner Surface of Bearing Rings. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(6), p. nestránkováno. ISSN 2076-3417. [Detail]

KUMAR, Kailash, Manickam PRADEEPA, Miroslav MAHDAL, Shikha VERMA, Mamidanna Venkata RAJARAO and Janjhyam Venkata Naga RAMESH. A Deep Learning Approach for Kidney Disease Recognition and Prediction through Image Processing. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(6), p. nestránkováno. ISSN 2076-3417. [Detail]

SHAIK, Kareemulla, Janjhyam Venkata Naga RAMESH, Miroslav MAHDAL, Mohammad Zia Ur RAHMAN, Syed KHASIM and Kanak KALITA. Big Data Analytics Framework Using Squirrel Search Optimized Gradient Boosted Decision Tree for Heart Disease Diagnosis. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(9), p. nestránkováno. ISSN 2076-3417. [Detail]

WANDROL, Ivo, Karel FRYDRÝŠEK and Daniel ČEPICA. Analysis of the Influence of Thermal Loading on the Behaviour of the Earth's Crust. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(7), p. nestránkováno. ISSN 2076-3417. [Detail]

WILLIAM, Mathias Vijay Albert, Subramanian RAMESH, Robert ČEP, Siva Kumar MAHALINGAM and Muniyandy ELANGOVAN. DPGWO Based Feature Selection Machine Learning Model for Prediction of Crack Dimensions in Steam Generator Tubes. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(14), p. nestránkováno. ISSN 2076-3417. [Detail]

HAGARA, Martin, Robert HUNADY, Pavol LENGVARSKY, Michal VOCETKA and Peter PALICKA. The Calibration Process and Setting of Image Brightness to Achieve Optimum Strain Measurement Accuracy Using Stereo-Camera Digital Image Correlation. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(17), p. nestránkováno. ISSN 2076-3417. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and Michal MOLČAN. Optimization of Control Parameters of Magnetorheological Squeeze Film Dampers to Minimize the Vibration Amplitude of Rotors Passing the Critical Speed. Applied Sciences. BASEL: MDPI Open Access Publishing, 2023, 13(12), p. nestránkováno. ISSN 2076-3417. [Detail]

RAJATHI, Krishnamoorthi, Nandhagopal GOMATHI, Miroslav MAHDAL and Radek GURÁŠ. Path Segmentation from Point Cloud Data for Autonomous Navigation. Applied Sciences. Basilej: MDPI Open Access Publishing, 2023, 13(6), p. nestránkováno. ISSN 2076-3417. [Detail]

ČADA, Radek and Tomáš PEKTOR. Design of the Production Technology of a Bent Component. Applied Sciences. MDPI Open Access Publishing, 2023, 13(24), p. 1-18. ISSN 2076-3417. [Detail]

MOLČAN, Michal, Petr FERFECKI and Jaroslav ZAPOMĚL. The Numerical Identification of Basins of Attraction for the Vibration Response of the Rigid Rotor with Squeeze Film Dampers. Applied Sciences. MDPI Open Access Publishing, 2023, 13(5), p. 1-21. ISSN 2076-3417. [Detail]

VARGA, Martin, Ivan VIRGALA, Michal KELEMEN, Ľubica MIKOVÁ, Zdenko BOBOVSKÝ, Peter Jan SINCAK and Tomáš MERVA. Pneumatic Bellows Actuated Parallel Platform Control with Adjustable Stiffness Using a Hybrid Feed-Forward and Variable Gain Integral Controller. Applied Sciences. MDPI Open Access Publishing, 2023, 2023(13), p. 13261-13284. ISSN 2076-3417. [Detail]

KUMAR, M. Guru Vimal, N. VEENA, Lenka ČEPOVÁ, M. Arun Manicka RAJA, Allam BALARAM and Muniyandy ELANGOVAN. Evaluation of the Quality of Practical Teaching of Agricultural Higher Vocational Courses Based on BP Neural Network. Applied Sciences. MDPI Open Access Publishing, 2023, 13(2), p. nestránkováno. ISSN 2076-3417. [Detail]

GURÁŠ, Radek, Miroslav MAHDAL and Marian BOJKO. Heat transfer analysis of a liquid cooling device using thermoelectric elements. Applied Thermal Engineering. Oxford: Pergamon - Elsevier Science, Ltd., 2023, 226(1), p. nestránkováno. ISSN 1359-4311. [Detail]

ŠOFER, Michal, Pawel KWIATON and Pavel PAVLÍČEK. APPLICATION OF IMPROVED b-VALUE AND CLUSTERING ANALYSIS FOR STRUCTURAL INTEGRITY ASSESSMENT OF CFRP SPECIMEN UNDER TENSILE LOADING. Archives of Metallurgy and Materials. Zabrze: Polish Academy of Sciences, 2023, 68(3), p. 1017-1023. ISSN 1733-3490. [Detail]

KUMARAN, Narayanan, Annamalai MEENAKSHI, Robert ČEP, Jayavelu Udaya PRAKASH and Ondřej MIZERA. Equitable and Paired Equitable Domination in Inflated Graphs and Their Complements. Axioms. BASEL: MDPI Open Access Publishing, 2023, 12(12), p. nestránkováno. ISSN 2075-1680. [Detail]

DRAHORÁD, Lukáš, Pavel MARŠÁLEK, Juraj HRONČEK, David RYBANSKÝ, Martin ŠOTOLA, Zdeněk PORUBA and Michal LARYS. Design and Non-Linear Modeling of New Wind Girder Used for Bolted Tanks. Buildings. MDPI Open Access Publishing, 2023, 13(11), p. 1-23. ISSN 2075-5309. [Detail]

GARUS, Sebastian, Justyna GARUS, Wojciech SOCHACKI, Marcin NABIALEK, Jana PETRŮ, Wojciech BOREK, Michal ŠOFER and Pawel KWIATON. Influence of material distribution and damping on the dynamic stability of Bernoulli-Euler beams. Bulletin of the Polish Academy of Sciences: Technical Sciences. Varšava: Polska akademia nauk (PAN), 2023, 71(4), p. nestránkováno. ISSN 0239-7528. [Detail]

GARUS, Sebastian, Wojciech SOCHACKI, Pawel KWIATON, Marcin NABIALEK, Jana PETRŮ and Mariusz KUBANEK. Influence of spatial distribution and the type of material on the occurrence of bandgaps in phononic crystals. Bulletin of the Polish Academy of Sciences: Technical Sciences. Varšava: Polska akademia nauk (PAN), 2023, 71(3), p. nestránkováno. ISSN 0239-7528. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. The disturbance influence on vibration of a belt device driven by a crank mechanism. Chaos, Solitons & Fractals. San Diego: Elsevier, 2023, 173(August), p. nestránkováno. ISSN 0960-0779. [Detail]

MIZERA, Ondřej, Lenka ČEPOVÁ, Jozef TKÁČ, Vieroslav MOLNÁR, Gabriel FEDORKO and Steven SAMBORSKI. Study of the influence of optical measurement of slope geometry in the working chamber for AISI 316L. Composite Structures. San Diego: Elsevier, 2023, 321(117291), p. nestránkováno. ISSN 0263-8223. [Detail]

MAHABEER, Joudel, Usha KUMARI, David LOKHAT, Milan ČÁRSKÝ and Bhim Charan MEIKAP. Implementation of microplastics derived from waste plastic for uptake of MB dye: Performance and LCA study. DESALINATION. 2023, 546(_), p. 1-11. ISSN 0011-9164. [Detail]

KUBICEK, Lubos, Radek VITÁSEK, David SCHWARZ, Robert STAFFA, Petr STRAKOŠ and Stanislav POLZER. Biomechanical Rupture Risk Assessment in Management of Patients with Abdominal Aortic Aneurysm in COVID-19 Pandemic. DIAGNOSTICS. BASEL: MDPI, 2023, 13(1), p. nestránkováno. ISSN 2075-4418. [Detail]

NGUYEN, Hoang-Sy, Huynh-Cong DANH, Phu MA QUOC, Jakub MĚSÍČEK, Jiří HAJNYŠ, Marek PAGÁČ and Jana PETRŮ. A Bibliometrics Analysis of Medical Internet of Things for Modern Healthcare. Electronics. BASEL: MDPI Open Access Publishing, 2023, 12(22), p. nestránkováno. ISSN 2079-9292. [Detail]

BORTNOWSKI, P., Horst GONDEK, R. KRÓL, D. MARASOVA and M. OZDOBA. Detection of Blockages of the Belt Conveyor Transfer Point Using an RGB Camera and CNN Autoencoder. Energies. Basilej: MDPI Open Access Publishing, 2023, 16(4), p. nestránkováno. ISSN 1996-1073. [Detail]

ORMAN, Łukasz, Natalia KRAWCZYK, Norbert RADEK, Stanislav HONUS, Jacek PETRASZEK, Luiza DĘBSKA, Agata DUDEK and Artur KALINOWSKI. Comparative Analysis of Indoor Environmental Quality a Self-Reported Productivity in Intelligent and Traditional Buildings. Energies. MDPI Open Access Publishing, 2023, 16(18), p. 1-21. ISSN 1996-1073. [Detail]

RACLAVSKÁ, Helena, Jana RŮŽIČKOVÁ, Michal ŠAFÁŘ, Marek KUCBEL, Karolina SLAMOVÁ, Barbora ŠVÉDOVÁ, Dagmar JUCHELKOVÁ and Pavel KANTOR. Municipal sludges as sources of energy or nutrients – What is the best?. Energy. Elsevier, 2023, 275(15.6. 2023), p. 127469. ISSN 0360-5442. [Detail]

RŮŽIČKOVÁ, Jana, Helena RACLAVSKÁ, Marek KUCBEL, Christoph PFEIFER, Dagmar JUCHELKOVÁ, Jitka HRBEK, Michal ŠAFÁŘ, Karolina SLAMOVÁ, Barbora ŠVÉDOVÁ and Pavel KANTOR. Incidence and spread of additives from co-combustion of plastic waste in domestic boilers in indoor and outdoor environments around the family house. Energy. Elsevier, 2023, p. 129357. ISSN 0360-5442. [Detail]

KHAN, R., A.-H.I. MOURAD, A.H. SEIKH, Jana PETRŮ and H. H.YA. Erosion impact on mild steel elbow pipeline for different orientations under liquid-gas-sand annular flow. Engineering Failure Analysis. Oxford: PERGAMON-ELSEVIER SCIENCE LTD, 2023, 153(1), p. nestránkováno. ISSN 1350-6307. [Detail]

ŠOFER, Michal, Pavel ŠOFER, Martin FUSEK, Jakub CIENCIALA and Pawel KWIATON. Adaptive approach methodology of the Ib-value estimator calculation for acoustic emission analysis of carbon fibre reinforced plastics. Engineering Failure Analysis. PERGAMON-ELSEVIER SCIENCE LTD, 2023, 149, p. 1-13. ISSN 1350-6307. [Detail]

STOLARIK, Gabriel, Dagmar KLICHOVA, Jakub POLOPRUDSKY, Akash NAG and Sergej HLOCH. Assessment of surface irregularities created by controlled liquid droplet on the surface of stainless steel AISI 304L. Engineering Science and Technology, an International Journal. San Diego: Elsevier, 2023, 47(47), p. nestránkováno. ISSN 2215-0986. [Detail]

JADLOVEC, Marek, Jan VÝTISK, Stanislav HONUS, Václav POSPÍŠILÍK and Bassel NESSER. Pollutants production, energy recovery and environmental impact of sewage sludge co-incineration with biomass pellets. Environmental Technology & Innovation. Elsevier, 2023, 32(November 2023), p. 1-13. ISSN 2352-1864. [Detail]

RAHMAN, Md. Mahbubur, Ved PRAKASH, Sunil CHANDEL, D. G THAKUR, Robert ČEP, Nitin KHEDKAR, Sachin SALUNKHE and Emad S ABOUEL NASR. Analysis of the aerodynamic characteristics of an ejection seat system using computational fluid dynamics. Frontiers in Mechanical Engineering - Switzerland. LAUSANNE: Frontiers, 2023, 9(9), p. nestránkováno. ISSN 2297-3079. [Detail]

PRAKASH, Jayavelu Udaya, Subramani ANANTH, Sunder Jebarose JULIYANA, Robert ČEP, Nitin KHEDKAR, Sachin SALUNKHE, Emad Abouel NASR and Ali KAMRANI. Parametric optimization of wear parameters of hybrid composites (LM6/B₄C/fly ash) using Taguchi technique. Frontiers in Mechanical Engineering - Switzerland. LAUSANNE: Frontiers, 2023, 9(9), p. nestránkováno. ISSN 2297-3079. [Detail]

GHADAI, Ranjan Kumar, G. SHANMUGASUNDAR, Lenka ČEPOVÁ, Soham DAS, Premchand Kumar MAHTO and Kanak KALITA. A temperature-based synthesis and characterization study of aluminum-incorporated diamond-like carbon thin films. Frontiers in Mechanical Engineering - Switzerland. LAUSANNE: Frontiers, 2023, 9(9), p. nestránkováno. ISSN 2297-3079. [Detail]

ŽÍDEK, Martin, František NYKLES, Veronika SÝKOROVÁ and Filip VANĚK. Effect of Changing Jaw Crusher Parameters on Granulometry and Static Angle of Repose of Crushed Aggregate. GeoScience Engineering. Vysoká škola báňská - Technická univerzita Ostrava, 2023, 69(2), p. 179–185. ISSN 1802-5420. [Detail]

KUKULIAČ, Pavel, Jiří HORÁK, David FOJTÍK, Igor IVAN, Ondřej KOLODZIEJ, Lucie ORLÍKOVÁ and Petra MARESOVA. Post COVID-19 public transport accessibility changes: Case study of Ostrava and Hradec Kralove regions. Geographia Cassoviensis. Košice: Pavol Jozef Šafárik University, 2023, 17(1), p. 73-92. ISSN 1337-6748. [Detail]

SELVARAJ, Aswath, Valarmathi Rav. Shanmuga SUNDARAM and Miroslav MAHDAL. An Adaptive Sleep Apnea Detection Model using Multi Cascaded Atrous based Deep Learning Schemes with Hybrid Artificial Humming Bird Pity Beetle Algorithm. IEEE Access. Piscataway: IEEE - Institute of Electrical and Electronics Engineers, 2023, 2023(11), p. 113114-113133. ISSN 2169-3536. [Detail]

GANESH, Narayanan, Sambandan JAYALAKSHMI, Rama Chandran NARAYANAN, Miroslav MAHDAL, Hossam M. M ZAWBAA and Ali Wagdy MOHAMED. Gated Deep Reinforcement Learning With Red Deer Optimization for Medical Image Classification. IEEE Access. Piscataway: IEEE - Institute of Electrical and Electronics Engineers, 2023, 11(2023), p. 58982-58993. ISSN 2169-3536. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and Jan KOZÁNEK. Avoiding disc collisions and nonlinear vibration of unbalanced rotors by means of position control of the rotor journal mounted in magnetorheological hydrodynamic bearings. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS. PERGAMON-ELSEVIER SCIENCE LTD, 2023, 151(May), p. nestránkováno. ISSN 0020-7462. [Detail]

DWIVEDI, Suryank, Amit Rai DIXIT, Alok Kumar DAS and Akash NAG. A Novel Additive Texturing of Stainless Steel 316L Through Binder Jetting Additive Manufacturing. International Journal of Precision Engineering and Manufacturing-Green Technology. Soul: Korean Society for Precision Engineeing, 2023, 2023(17/03/2023), p. nestránkováno. ISSN 2288-6206. [Detail]

SRIVASTAVA, Ashish Kumar, Ajay KUMAR, Parveen KUMAR, Preeti GAUTAM and Namrata DOGRA. Research Progress in metal additive manufacturing: Challenges and Opportunities. International Journal on Interactive Design and Manufacturing. Vídeň: Springer, 2023, 2023(DECEMBER 2023), p. 1-17. ISSN 1955-2513. [Detail]

SINGH, Aditya, Ashish Kumar SRIVASTAVA, Ajay KUMAR and Preeti GAUTAM. Design for low thermal conductivity and low vibrational impact without efflorescence of the composite bricks developed by waste plastic resin/fly ash/glass powder/gypsum. International Journal on Interactive Design and Manufacturing. Vídeň: Springer, 2023, 2023(OCTOBER 2023), p. nestránkováno. ISSN 1955-2513. [Detail]

KHAN, Rehan, Jana PETRŮ and A. H SEIKH. Erosion prediction due to micron-sized particles in the multiphase flow of T and Y pipes of oil and gas fields. International journal of pressure vessels and piping. San Diego: Elsevier, 2023, 206(1), p. nestránkováno. ISSN 0308-0161. [Detail]

LUKÁŠ, Dalibor and Tomáš KOT. Hierarchical Real-Time Optimal Planning of Collision-Free Trajectories of Collaborative Robots. Journal of Intelligent and Robotic Systems: Theory and Applications. DORDRECHT: Springer, 2023, 107(4), p. 57. ISSN 0921-0296. [Detail]

JANSA, Jan, Anastasia VOLODARSKAJA, Josef HLINKA, Lucie ZARYBNICKA, Stanislav POLZER, Martin KRAUS, Jiří HAJNYŠ, David SCHWARZ and Marek PAGÁČ. Corrosion and material properties of 316L stainless steel produced by material extrusion technology. Journal of Manufacturing Processes. San Diego: Elsevier, 2023, 88(88), p. 232-245. ISSN 1526-6125. [Detail]

STOLÁRIK, G., J. SVOBODOVÁ, D. KLICHOVÁ, Akash NAG and S. HLOCH. Titanium surface roughening with ultrasonic pulsating water jet. Journal of Manufacturing Processes. San Diego: Elsevier, 2023, 90(24/03/2023), p. 341-356. ISSN 1526-6125. [Detail]

PELIKAN, Lukas, Michal SLANY, Ondrej STRANSKY, Libor BERANEK, Zdenek PITRMUC, Lenka ČEPOVÁ and Stepanka DVORACKOVA. Novel drill geometries for dry drilling of stainless steel. Journal of Manufacturing Processes. San Diego: Elsevier, 2023, 92(92), p. 500-520. ISSN 1526-6125. [Detail]

GRAF, Alexander, Verena KRAEUSEL, Dieter WEISE, Jana PETRŮ, Jiří KOZIOREK and Pravishan BHANDARI. Determination of the Influence of the Tool Side Stress Superposition and Tool Geometry on the Cut Surface Quality during Precision Shear Cutting. Journal of Manufacturing and Materials Processing. BASEL: MDPI Open Access Publishing, 2023, 7(4), p. nestránkováno. ISSN 2504-4494. [Detail]

CZAKÓ, Alexander, Kamil ŘEHÁK, Aleš PROKOP, Jakub REKEM, Daniel LÁŠTIC and Miroslav TROCHTA. Static transmission error measurement of various gear-shaft systems by finite element analysis. Journal of Measurements in Engineering. JVE International, 2023, 12(1), p. 16. ISSN 2335-2124. [Detail]

NESLUSAN, Miroslav, K. ZGUTOVA, Robert ČEP, M. PITONAK and F. ANDEJKA. Barkhausen noise emission in soft magnetic ribbons heat treated in an external magnetic field. Journal of magnetism and magnetic materials. San Diego: Elsevier, 2023, 572(March), p. nestránkováno. ISSN 0304-8853. [Detail]

MOURALOVA, Kateřina, Josef BEDNAR, Libor BENES, Andrea POLZER, Rudolf ZAHRADNICEK, Jiří FRIES and Tomas PROKES. Machining of 1.2363 and 1.2343ESR steels using EDM. Journal of the Brazilian Society of Mechanical Sciences and Engineering. Vídeň: Springer, 2023, 45(7), p. nestránkováno. ISSN 1678-5878. [Detail]

POLZER, Stanislav and Radek VITÁSEK. Low cycle fatigue properties of porcine aorta-Pilot study. Journal of the Mechanical Behavior of Biomedical Materials. New York: Elsevier Science, 2023, 140(April), p. nestránkováno. ISSN 1751-6161. [Detail]

KROL, Mariusz and Jiří HAJNYŠ. Calorimetric analysis of Mg-Li ultra light magnesium alloy. Journal of thermal analysis and calorimetry. Vídeň: Springer, 2023, 2023(JUL 2023), p. 1-9. ISSN 1388-6150. [Detail]

BACHCHHAV, Bhanudas D. D., Shrikant V. V. CHAITANYA, Sachin SALUNKHE, Palanisamy CHANDRAKUMAR, Marek PAGÁČ and Emad Abouel NASR. Wear Performance of Cu-Cd, Cu-Be and Cu-Cr-Zr Spot Welding Electrode Materials. Lubricants. BASEL: MDPI Open Access Publishing, 2023, 11(7), p. 1-15. ISSN 2075-4442. [Detail]

ŠMACH, Jiří, Radim HALAMA, Martin MAREK, Michal ŠOFER, Kovář LIBOR and Matušek PETR. Two Contributions to Rolling Contact Fatigue Testing Considering Different Diameters of Rail and Wheel Discs. Lubricants. MDPI Open Access Publishing, 2023, 11(12), p. 504. ISSN 2075-4442. [Detail]

GRAF, Vojtěch, Pavel STANĚK and Štěpán KRUMP. OPTIMIZATION OF WORKERS QUANTITY USING MATHEMATICAL MODEL. MM Science Journal. Praha: MM Publishing, 2023, 2023(březen 2023), p. 6339-6345. ISSN 1803-1269. [Detail]

DVOŘÁK, Lukáš, Kamil FOJTÁŠEK and Filip DÝRR. EXPERIMENTAL VERIFICATION OF PNEUMATIC ELEMENTS MATHEMATICAL MODELS IN MATLAB-SIMULINK SIMSCAPE. MM Science Journal. Praha: MM Publishing, 2023, 2023(March), p. 6359-6363. ISSN 1803-1269. [Detail]

SLÍVA, Aleš, Kamil SKACEL, Gražyna SIMHA MARTYNKOVÁ, Robert BRÁZDA, Silvie BROŽOVÁ and Samuel CIENCIALA. STUDY OF MASS MOTION ON VIBRATING DEVICE: DESIGN AND PROCESS SIMULATION. MM Science Journal. Praha: MM Publishing, 2023, 2023(2023), p. 6375-6380. ISSN 1803-1269. [Detail]

NGUYEN, Hoang-Sy, Phu MA QUOC, Jiří HAJNYŠ, Jakub MĚSÍČEK and Marek PAGÁČ. RESEARCH TREND IN THE FIELD OF ADDITIVE MANUFACTURING WITH BIBLIOMETRICS STUDY. MM Science Journal. Praha: MM Publishing, 2023, 2023(June 2023), p. 6534-6537. ISSN 1803-1269. [Detail]

BLÁHA, Roman, Dominik KRIŠÁK, Jiří HAJNYŠ, Jakub MĚSÍČEK, Marek PAGÁČ, Lukáš JANČAR, Jan JANSA, Eliška POSMYKOVÁ and Marek GAZDA. EXPERIMENTAL VERIFICATION OF PROCESS PARAMETERS INFLUENCING THE MECHANICAL PROPERTIES OF M300 IN THE SLM PROCESS. MM Science Journal. Praha: MM Publishing, 2023, 2023(JUNE 2023), p. 6555-6560. ISSN 1803-1269. [Detail]

NGUYEN, Hoang-sy, Khanh-Duy Ho HOANG, Cong-Danh HUYNH, Phu MA QUOC and Jakub MĚSÍČEK. 3D TECHNOLOGIE PRO ZACHOVÁNÍ NEHMOTNÉHO KULTURNÍHO DĚDICTVÍ : VYTVÁŘENÍ 3D MODELŮ LAKOVÉHO UMĚNÍ PROSTŘEDNICTVÍM FOTOGRAMMETRIE. MM Science Journal. Praha: MM Publishing, 2023, 2023(2023), p. 6706-6711. ISSN 1803-1269. [Detail]

MACHAC, T., Peter POKORNÝ, Jana PETRŮ, J. HRBAL, M. KURUC and T. VOPAT. ADITIVE MANUFACTURING OF M300 STEEL CUTTING TOOLS BY SELECTIVE LASER MELTING. MM Science Journal. Praha: MM Publishing, 2023, 10(1), p. 6735-6740. ISSN 1803-1269. [Detail]

KAČMAŘÍK, Michal and David FOJTÍK. POSITIONING PERFORMANCE OF LOW-COST U-BLOX NEO-M8U MODULE IN URBAN ENVIRONMENT. MM Science Journal. Praha: MM Publishing, 2023, p. 6776-6784. ISSN 1803-1269. [Detail]

NEVŘELA, Martin, Martin VAŠINA, Pavel HRBACEK and Vladimir DEKYS. EFFECT OF GEOMETRY AND SURFACE DISTRIBUTION OF HOLES ON SOUND AND LIGHT ABSORPTION PROPERTIES OF 3D-PRINTED PETG MATERIALS. MM Science Journal. Praha: MM Publishing, 2023, 2023(October), p. 6793-6799. ISSN 1803-1269. [Detail]

PRAVDA, Štěpán, Vít KOSTECKÝ, Radim ŠEBESTA, Daniel KURAČ, Jan LILKO, Barath MARTIN and Kotus MARTIN. VIBRATION ANALYSIS OF A V-BELT DRIVE IN VARIABLE CONDITIONS OF PULLEYS MISALIGNMENT. MM Science Journal. MM Publishing, 2023, March(MMSJ.2023_03), p. 6289-6293. ISSN 1803-1269. [Detail]

BUČKO, Michal, Vladimíra SCHINDLEROVÁ and Ivana ŠAJDLEROVÁ. OPTIMIZATION OF THE EXPEDITION PROCESS OF SHAPES IN THE ENGINEERING COMPANY. MM Science Journal. MM Publishing, 2023, 2023(March), p. 6294-6303. ISSN 1803-1269. [Detail]

ČADA, Radek and Štěpán MATĚJ. Solution of a Suitable Method of Production of Contactor Forgings. MM Science Journal. MM Publishing, 2023, 16(1), p. 6304-6316. ISSN 1803-1269. [Detail]

HILŠER, Ondřej, Martin PASTRŇÁK, Stanislav RUSZ, Hana KRUPOVÁ and Przemysław SNOPIŃSKI. Finite element analysis of twist channel angular pressing. MM Science Journal. MM Publishing, 2023, 16(1), p. 6314-6318. ISSN 1803-1269. [Detail]

PASTRŇÁK, Martin, Stanislav RUSZ and Ondřej HILŠER. Microstructure evolution of AZ31 magnesium alloy during twist channel Angular Pressing. MM Science Journal. MM Publishing, 2023, 16(1), p. 6319-6324. ISSN 1803-1269. [Detail]

SCHINDLEROVÁ, Vladimíra, Ivana ŠAJDLEROVÁ, Michal BUČKO and Lucie KLEPKOVÁ. SIMULATION AND OPTIMISATION OF THE ASSEMBLY LINE PRODUCTION PROCESS. MM Science Journal. MM Publishing, 2023, 2023(March), p. 6325-6332. ISSN 1803-1269. [Detail]

STERNADELOVÁ, Kristýna, Hana KRUPOVÁ, Dalibor MATÝSEK and Petr MOHYLA. Quality Assessment of the Vitreous Enamel Coating Applied to the Weld Joint. MM Science Journal. MM Publishing, 2023, 2023(MARCH), p. 6333-6338. ISSN 1803-1269. [Detail]

STRUŽ, Jiří, Lukáš HRUZÍK, Lukáš KLAPETEK and Miroslav TROCHTA. COMPARATIVE ANALYSIS OF DIFFERENT SOFTWARES IN TERMS OF PARAMETERS OPTIMIZED BY TOPOLOGICAL OPTIMIZATION. MM Science Journal. MM Publishing, 2023, p. 6346-6353. ISSN 1803-1269. [Detail]

KLAPETEK, Lukáš, Jiří DOBIÁŠ, Jiří STRUŽ and Zdeněk FOLTA. COMPARISON OF STANDARD AND NONSTANDARD GEAR ROOT FILLET CONSIDERING ROOT STRESS AND MANUFACTURING POSSIBILITIES. MM Science Journal. MM Publishing, 2023, 2023(2023-03-26), p. 6354-6358. ISSN 1803-1269. [Detail]

MÜCKOVÁ, Petra, Ondrej KALABZA, Jan FAMFULÍK, Jakub ŠMIRAUS, Jaromír ŠIROKÝ and Jana MÍKOVÁ. ENGINE INTAKE AIRBOX CFD OPTIMISATION AND EXPERIMENTAL VALIDATION TESTS. MM Science Journal. MM Publishing, 2023, 2023-March(1), p. 6364-6367. ISSN 1803-1269. [Detail]

SCHREIBEROVÁ, Petra and Zuzana MORÁVKOVÁ. THE USE OF GEOGEBRA IN TECHNICAL MATHEMATICS. MM Science Journal. MM Publishing, 2023, p. 6368-6374. ISSN 1803-1269. [Detail]

HLAVATÝ, Ivo, Lucie KREJČÍ, Michal BUČKO, Miroslav TICHÝ, Martin FRYŠÁK and Marek PALÁN. TECHNOLOGY OF RESURFACING MN-STEELS USED TO MANUFACTURE RAILS. MM Science Journal. MM Publishing, 2023, p. 6381-6384. ISSN 1803-1269. [Detail]

POSMYKOVÁ, Eliška, Marek GAZDA and Jakub MĚSÍČEK. TOPOLOGICAL OPTIMIZATION OF THE ROCKER ARM. MM Science Journal. MM Publishing, 2023, 2023-June(June 2023), p. 6545-6549. ISSN 1803-1269. [Detail]

SLANINKOVÁ, Aneta, Jan JANSA, Radim JANECZKO, Ivan MRKVICA, Marek PAGÁČ and Tibor JURGA. EFFECT OF CUTTING EDGE PREPARATION TECHNOLOGIES ON SURFACE ROUGHNESS , PROCESSING TIME AND K- FACTOR. MM Science Journal. MM Publishing, 2023, 2023(June), p. 6550-6554. ISSN 1803-1269. [Detail]

TRAN, D., Q. LE, L. NGUYEN, Phu MA QUOC, Jiří HAJNYŠ and H. NGUYEN. EVALUATING THE KEYWORDS CHALLENGES OF ADDITIVE MANUFACTURING ADOPTION USING THE AVERAGE ANALYTIC HIERARCHY PROCESS (A(AHP)) METHOD: EMPIRICAL RESEARCH IN VIETNAM. MM Science Journal. MM Publishing, 2023, 2023(2023), p. 6768-6775. ISSN 1803-1269. [Detail]

FRYDRÝŠEK, Karel, Daniel ČEPICA, Leopold HRABOVSKÝ and Marek NIKODÝM. Experimental and Stochastic Application of an Elastic Foundation in Loose Material Transport via Sandwich Belt Conveyors. Machines. BASEL: MDPI Open Access Publishing, 2023, 11(3), p. 1-22. ISSN 2075-1702. [Detail]

FRYDRÝŠEK, Karel, Daniel ČEPICA, Leopold HRABOVSKÝ and Marek NIKODÝM. Experimental and Stochastic Application of an Elastic Foundation in Loose Material Transport via a Sandwich Belt Conveyor-Part 2. Machines. BASEL: MDPI Open Access Publishing, 2023, 11(7), p. nestránkováno. ISSN 2075-1702. [Detail]

SIDDIQUE, M. Zeeshan, Muhammad Iftikhar FARAZ, Shahid Ikramullah BUTT, Rehan KHAN, Jana PETRŮ, Syed Husain Imran JAFFERY, Muhammad Ali KHAN and Abdul Malik TAHIR. Parametric Analysis of Tool Wear, Surface Roughness and Energy Consumption during Turning of Inconel 718 under Dry, Wet and MQL Conditions. Machines. BASEL: MDPI Open Access Publishing, 2023, 11(11), p. nestránkováno. ISSN 2075-1702. [Detail]

BLATNICKÝ, M., J. DIŽO, M. SÁGA, D. MOLNÁR and Aleš SLÍVA. Utilizing Dynamic Analysis in the Complex Design of an Unconventional Three-Wheeled Vehicle with Enhancing Cornering Safety. Machines. Basilej: MDPI Open Access Publishing, 2023, 11(8), p. nestránkováno. ISSN 2075-1702. [Detail]

HRABOVSKÝ, Leopold, Eliška NOVÁKOVÁ, Štěpán PRAVDA, Daniel KURAČ and Tomáš MACHÁLEK. The Reduction of Rotating Conveyor Roller Vibrations via the Use of Plastic Brackets. Trans. Gabriela CHUDAŠOVÁ. Machines. MDPI Open Access Publishing, 2023, 11(12), p. 1070. ISSN 2075-1702. [Detail]

HRABOVSKÝ, Leopold, Petr NENIČKA and Jiří FRIES. Laboratory machine verification of force transmission provided by friction acting on the drive drum of a conveyor belt. Trans. Gabriela CHUDAŠOVÁ. Machines. MDPI Open Access Publishing, 2023, 11(5), p. 554. ISSN 2075-1702. [Detail]

ZÁRYBNICKÁ, L., Marek PAGÁČ, R. ŠEVČÍK, J. POKORNÝ and M. MAREK. Effect of Topology Parameters on Physical–Mechanical Properties of Magnetic PLA 3D-Printed Structures. Magnetochemistry. Basilej: MDPI Open Access Publishing, 2023, 9(12), p. nestránkováno. ISSN 2312-7481. [Detail]

RIEMEL, Tomáš. O jedné diofantovské rovnici. Matematika-fyzika-informatika. Jednota českých matematiků a fyziků, 2023, 32(3), p. 174-183. ISSN 1210-1761. [Detail]

VELIČKA, Marek, René PYSZKO, Mario MACHŮ, Jiří BURDA, Tomáš KUBÍN, Hana OVČAČÍKOVÁ and David RIGO. Research on Solid Shell Growth during Continuous Steel Casting. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(15), p. 1-18. ISSN 1996-1944. [Detail]

SHANMUGASUNDAR, G., Ankur BANSOD, Vladimíra SCHINDLEROVÁ and Robert ČEP. Influence of Filler Material on the Microstructural and Mechanical Properties of 430 Ferritic Stainless Steel Weld Joints. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(4), p. nestránkováno. ISSN 1996-1944. [Detail]

MICIETOVA, Anna, Maria CILLIKOVA, Robert ČEP, Miroslav NESLUSAN and Nikolaj GANEV. Study of Residual Stresses and Austenite Gradients in the Surface after Hard Turning as a Function of Flank Wear and Cutting Speed. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(4), p. nestránkováno. ISSN 1996-1944. [Detail]

ARIVALAGAN, Suresh, Rajakumar SAPPANI, Robert ČEP and Mahalingam Siva KUMAR. Optimization and Experimental Investigation of 3D Printed Micro Wind Turbine Blade Made of PLA Material. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(6), p. nestránkováno. ISSN 1996-1944. [Detail]

MIKULIKOVA, Aleksandra, Jakub MĚSÍČEK, Jan KARGER, Jiří HAJNYŠ, Phu MA QUOC, Aleš SLÍVA, Jakub ŠMIRAUS, Dávid SRNÍČEK, Samuel CIENCIALA and Marek PAGÁČ. Topology Optimization of the Clutch Lever Manufactured by Additive Manufacturing. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(9), p. nestránkováno. ISSN 1996-1944. [Detail]

JULIYANA, Sunder Jebarose, Jayavelu Udaya PRAKASH, Robert ČEP and Krishnasamy KARTHIK. Multi-Objective Optimization of Machining Parameters for Drilling LM5/ZrO2 Composites Using Grey Relational Analysis. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(10), p. nestránkováno. ISSN 1996-1944. [Detail]

NAG, Akash, Madhulika SRIVASTAVA, Jana PETRŮ, Petra VÁŇOVÁ, Ashish Kumar SRIVASTAVA and Sergej HLOCH. Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(9), p. nestránkováno. ISSN 1996-1944. [Detail]

GHADAI, Ranjan Kumar, Kamaraj LOGESH, Robert ČEP, Jasgurpreet Singh CHOHAN and Kanak KALITA. Influence of Deposition Time on Titanium Nitride (TiN) Thin Film Coating Synthesis Using Chemical Vapour Deposition. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(13), p. nestránkováno. ISSN 1996-1944. [Detail]

DEVI, C, Siva Kumar MAHALINGAM, Robert ČEP and Karel KOURIL. Effect of Cryo-Treated Cutting Tool End Milling on Custom 450 Stainless Steel. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(13), p. nestránkováno. ISSN 1996-1944. [Detail]

DEREJE, Teshome, Sivaprakasam PALANI, Melaku DESTA and Robert ČEP. Experimental Investigation into the Influence of the Process Parameters of Wire Electric Discharge Machining Using Nimonic-263 Superalloy. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(15), p. nestránkováno. ISSN 1996-1944. [Detail]

FOJTÍK, František, Roman POTROK, Jiří HAJNYŠ, Phu MA QUOC, Lukáš KUDRNA and Jakub MĚSÍČEK. Quantification and Analysis of Residual Stresses in Braking Pedal Produced via Laser-Powder Bed Fusion Additive Manufacturing Technology. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(17), p. nestránkováno. ISSN 1996-1944. [Detail]

GEL'ATKO, Matus, Michal HATALA, Frantisek BOTKO, Radoslav VANDZURA, Jiří HAJNYŠ, Michal SAJGALIK and Jozef TOROK. Stress Relieving Heat Treatment of 316L Stainless Steel Made by Additive Manufacturing Process. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(19), p. nestránkováno. ISSN 1996-1944. [Detail]

GNATOWSKI, Adam, Rafal GOLEBSKI, Piotr SIKORA, Jana PETRŮ and Jiří HAJNYŠ. Analysis of the Impact of Changes in Thermomechanical Properties of Annealed Semi-Crystalline Plastics on the Surface Condition after the Machining Process. Materials. BASEL: MDPI Open Access Publishing, 2023, 16(13), p. nestránkováno. ISSN 1996-1944. [Detail]

MOURALOVA, K., J. BEDNAR, L. BENES, T. PROKES, R. ZAHRADNICEK and Jiří FRIES. Mathematical Models for Machining Optimization of Ampcoloy 35 with Different Thicknesses Using WEDM to Improve the Surface Properties of Mold Parts. Materials. Basilej: MDPI Open Access Publishing, 2023, 16(1), p. nestránkováno. ISSN 1996-1944. [Detail]

HRONČEK, Juraj, Pavel MARŠÁLEK, David RYBANSKÝ, Martin ŠOTOLA, Lukáš DRAHORÁD, Michal LESŇÁK and Martin FUSEK. Simplified Numerical Model for Determining Load-Bearing Capacity of Steel-Wire Ropes. Materials. MDPI Open Access Publishing, 2023, 16(10), p. 1-13. ISSN 1996-1944. [Detail]

SNOPIŃSKI, Przemysław, Matus KRYSZTOF, Ondřej HILŠER and Stanislav RUSZ. Effects of Built Direction and Deformation Temperature on the Grain Refinement of 3D Printed AlSi10Mg Alloy Processed by Equal Channel Angular Pressing (ECAP). Materials. MDPI Open Access Publishing, 2023, 16(12), p. 1-15. ISSN 1996-1944. [Detail]

SNOPIŃSKI, Przemysław, Krzysztof MATUS and Ondřej HILŠER. Investigation of the effects of various severe plastic deformation techniques on the microstructure of laser powder bed fusion AlSi10Mg alloy. Materials. MDPI Open Access Publishing, 2023, 16(23), p. 1-19. ISSN 1996-1944. [Detail]

POKORNÝ, Peter, Delgado SOBRINO, Štefan VÁCLAV, Jana PETRŮ and Rafal GOLEBSKI. Research into Specific Mechanical Properties of Composites Produced by 3D-Printing Additive Continuous-Fibe. Materials. MDPI Open Access Publishing, 2023, 16(4), p. 1-21. ISSN 1996-1944. [Detail]

SRIVASTAVA, A.K., S. DWIVEDI, Akash NAG, D. KUMAR, A.R. DIXIT and Sergej HLOCH. Microstructural, mechanical and tribological performance of a magnesium alloy AZ31B/Si3N4/eggshell surface composite produced by solid-state multi-pass friction stir processing. Materials Chemistry and Physics. Lausanne: Elsevier Science SA, 2023, 301(127694), p. nestránkováno. ISSN 0254-0584. [Detail]

SNOPINSKI, P, Ondřej HILŠER and Jiří HAJNYŠ. Tuning the defects density in additively manufactured fcc aluminium alloy via modifying the cellular structure and post-processing deformation. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing. Lausanne: Elsevier Science SA, 2023, 865(February), p. nestránkováno. ISSN 0921-5093. [Detail]

MEENAKSHI, Annamalai, Adhimoolam KANNAN, Miroslav MAHDAL, Krishnasamy KARTHIK and Radek GURÁŠ. A Comparative Study of Fuzzy Domination and Fuzzy Coloring in an Optimal Approach. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(18), p. 1-16. ISSN 2227-7390. [Detail]

VASUKI, Manimozhi, Ramachandramoorthi SHANMUGAPRIYA, Miroslav MAHDAL and Robert ČEP. A Study on Fuzzy Resolving Domination Sets and Their Application in Network Theory. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(2), p. nestránkováno. ISSN 2227-7390. [Detail]

VIMALA, Ramasamy, Ramasamy KODEESWARAN, Robert ČEP, Majella Jenvi Ignatia KRISHNASAMY, Meenakshi AWASTHI and Govindasamy SANTHAKUMAR. Oscillation of Nonlinear Neutral Delay Difference Equations of Fourth Order. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(6), p. nestránkováno. ISSN 2227-7390. [Detail]

SRIREKHA, B., Shakeela SATHISH, R. Narmada DEVI, Miroslav MAHDAL, Robert ČEP and K. ELAVARASAN. Attributes Reduction on SE-ISI Concept Lattice for an Incomplete Context Using Object Ranking. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(7), p. nestránkováno. ISSN 2227-7390. [Detail]

VISWANATH, Jagadeesan, Rajamanickam THILAGAVATHI, Krishnasamy KARTHIK and Miroslav MAHDAL. A Study of a Two Storage Single Product Inventory System with Ramp Type Demand, N-Phase Prepayment and Purchase for Exigency. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(7), p. nestránkováno. ISSN 2227-7390. [Detail]

KIRAN, Ajmeera, Prasad MATHIVANAN, Miroslav MAHDAL, Kanduri SAIRAM, Deepak CHAUHAN and Vamsidhar TALASILA. Enhancing Data Security in IoT Networks with Blockchain-Based Management and Adaptive Clustering Techniques. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(9), p. nestránkováno. ISSN 2227-7390. [Detail]

NARAYANAN, Rama Chandran, Narayanan GANESH, Robert ČEP, Pradeep JANGIR, Jasgurpreet Singh CHOHAN and Kanak KALITA. A Novel Many-Objective Sine-Cosine Algorithm (MaOSCA) for Engineering Applications. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(10), p. nestránkováno. ISSN 2227-7390. [Detail]

REDDY, Nagireddy Venkata, Pydimarri PADMAJA, Miroslav MAHDAL, Selvaraj SEERANGAN, Vrince VIMAL, Vamsidhar TALASILA and Lenka ČEPOVÁ. Hybrid Fuzzy Rule Algorithm and Trust Planning Mechanism for Robust Trust Management in IoT-Embedded Systems Integration. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(11), p. nestránkováno. ISSN 2227-7390. [Detail]

SHANMUGAPRIYA, Ramachandramoorthi, Perichetla Kandaswamy HEMALATHA, Lenka ČEPOVÁ and Jiří STRUŽ. A Study of Independency on Fuzzy Resolving Sets of Labelling Graphs. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(16), p. nestránkováno. ISSN 2227-7390. [Detail]

GUNASEKAR, Tharmalingam, Jothivelu THIRAVIDARANI, Miroslav MAHDAL, Prabakaran RAGHAVENDRAN, Arikrishnan VENKATESAN and Muniyandy ELANGOVAN. Study of Non-Linear Impulsive Neutral Fuzzy Delay Differential Equations with Non-Local Conditions. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(17), p. nestránkováno. ISSN 2227-7390. [Detail]

JAGADEESAN, Viswanath, Thilagavathi RAJAMANICKAM, Vladimíra SCHINDLEROVÁ, Sreelakshmi SUBBARAYAN and Robert ČEP. A Study on Two-Warehouse Inventory Systems with Integrated Multi-Purpose Production Unit and Partitioned Rental Warehouse. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(18), p. nestránkováno. ISSN 2227-7390. [Detail]

MEENAKSHI, Annamalai, Adhimoolam KANNAN, Robert ČEP and Muniyandy ELANGOVAN. Efficient Graph Network Using Total Magic Labeling and Its Applications. Mathematics. BASEL: MDPI Open Access Publishing, 2023, 11(19), p. nestránkováno. ISSN 2227-7390. [Detail]

KUMARAN, Narayanan, Annamalai MEENAKSHI, Miroslav MAHDAL, Jayavelu Udaya PRAKASH and Radek GURÁŠ. Application of Fuzzy Network Using Efficient Domination. Mathematics. Basilej: MDPI Open Access Publishing, 2023, 11(10), p. nestránkováno. ISSN 2227-7390. [Detail]

JAGAN, Shanmugam, Ashish ASHISH, Miroslav MAHDAL, Kenneth Ruth ISABELS, Jyoti DHANKE, Parita JAIN and Muniyandy ELANGOVAN. A Meta-Classification Model for Optimized ZBot Malware Prediction Using Learning Algorithms. Mathematics. Basilej: MDPI Open Access Publishing, 2023, 11(13), p. nestránkováno. ISSN 2227-7390. [Detail]

HRABOVSKÝ, Leopold, Jan BLATA, Ladislav HRABEC and Jiří FRIES. The detection of forces acting on conveyor rollers of a laboratory device simulating the vertical section of a Sandwich Belt Conveyor. Trans. Gabriela CHUDAŠOVÁ. Measurement. Elsevier, 2023, 207(1), p. 112376. ISSN 0263-2241. [Detail]

HRABOVSKÝ, Leopold, Tomáš MLČÁK, Vieroslav MOLNÁR, Gabriel FEDORKO and Peter MICHALIK. Experimental measurement of a pulling force and determination of a friction coefficient during driven transport rollers’ movement. Measurement. Elsevier, 2023, 217(1), p. 113092. ISSN 0263-2241. [Detail]

JAGOS, Jiri, David SCHWARZ, Stanislav POLZER and Jiri BURSA. Effect of aortic bifurcation geometry on pressure and peak wall stress in abdominal aorta: Fluid-structure interaction study. Medical Engineering and Physics. San Diego: Elsevier, 2023, 118(104014), p. nestránkováno. ISSN 1350-4533. [Detail]

BENES, L., K. MOURALOVA, P. MIDULA, J. SNOW, I. LYSONKOVA, D. PILNAJ, H. BURDOVA, T. PROKES, R. ZAHRADNICEK, Jiří FRIES, P. KURÁŇ and M. KUBENKA. The Corrosion Behavior of WEDM Machined Stainless Steels in a Pyrolysis Environment. Metals. Basilej: MDPI Open Access Publishing, 2023, 13(1), p. nestránkováno. ISSN 2075-4701. [Detail]

KREJČÍ, Jakub, Marek BABIUCH, Ján BABJAK, Jiří SUDER and Rostislav WIERBICA. Implementation of an Embedded System into the Internet of Robotic Things. Micromachines. Multidisciplinary digital publishing institute, 2023, 14(1), p. 1-17. ISSN 2072-666X. [Detail]

POLZER, Stanislav, Sarah THOMPSON, Swathi VITTALBABU, Arzu ULU, David CARTER, Tara NORDGREN and Mona ESKANDARI. MATLAB-Based Algorithm and Software for Analysis of Wavy Collagen Fibers. Microscopy and Microanalysis. Oxford: Oxford University Press, 2023, 29(6), p. 2108-2126. ISSN 1431-9276. [Detail]

LAPČÍK, Lubomír, Harun SEPETCIOGLU, Yousef MURTAJA, Barbora LAPČÍKOVÁ, Martin VAŠINA, Martin OVSÍK, Michal STANĚK and Shweta GAUTAM. Study of mechanical properties of epoxy/graphene and epoxy/halloysite nanocomposites. Nanotechnology Reviews. Walter de Gruyter GmbH, 2023, 12(1), p. 20220520. ISSN 2191-9089. [Detail]

LAMPART, Marek, Alžběta LAMPARTOVÁ and Orlando GIUSEPPE. On risk and market sentiments driving financial share price dynamics. Nonlinear Dynamics. Vídeň: Springer, 2023, 111(17), p. 16585-16604. ISSN 0924-090X. [Detail]

RIEMEL, Tomáš. On special exponential Diophantine equations. Notes on Number Theory and Discrete Mathematics. Bulgarian Academy of Sciences, 2023, 29(3), p. 598-602. ISSN 1310-5132. [Detail]

STRYK, Rostislav and Michal DORDA. Experimentální ověření kapacity pracoviště odletových povolení na stanovišti letištní služby řízení Ostrava/Mošnov. Perners Contact. Univerzita Pardubice, 2023, 18(1), p. 1-13. ISSN 1801-674X. [Detail]

ZARYBNICKA, Lucie, Jana MACHOTOVA, Marek PAGÁČ, Jozef RYCHLY and Anna VYKYDALOVA. The effect of filling density on flammability and mechanical properties of 3D-printed carbon fiber-reinforced nylon. Polymer testing. San Diego: Elsevier, 2023, 120(107944), p. nestránkováno. ISSN 0142-9418. [Detail]

ZUROWSKI, Wojciech, Jaroslaw ZEPCHLO, Robert ČEP, Lenka ČEPOVÁ, Miroslaw RUCKI, Zbigniew KRZYSIAK, Jacek CABAN and Waldemar SAMOCIUK. The Effect of Powder and Emulsion Binders on the Tribological Properties of Particulate Filled Glass Fiber Reinforced Polymer Composites. Polymers. BASEL: MDPI Open Access Publishing, 2023, 15(1), p. nestránkováno. ISSN 2073-4360. [Detail]

RAJESH, Durvasulu, Nagarajan LENIN, Robert ČEP, Palanivel ANAND and Muniyandy ELANGOVAN. Enhancement of Thermal Behaviour of Flax with a Ramie Fibre-Reinforced Polymer Composite. Polymers. BASEL: MDPI Open Access Publishing, 2023, 15(2), p. nestránkováno. ISSN 2073-4360. [Detail]

RAMESH, Velumayil, Krishnasamy KARTHIK, Robert ČEP and Muniyandy ELANGOVAN. Influence of Stacking Sequence on Mechanical Properties of Basalt/Ramie Biodegradable Hybrid Polymer Composites. Polymers. BASEL: MDPI Open Access Publishing, 2023, 15(4), p. nestránkováno. ISSN 2073-4360. [Detail]

PAUL, D. L. Belgin, Ayyappan Susila PRAVEEN, Lenka ČEPOVÁ and Muniyandy ELANGOVAN. Rheological Behavior and Printability Study of Tri-Calcium Phosphate Ceramic Inks for Direct Ink Writing Method. Polymers. BASEL: MDPI Open Access Publishing, 2023, 15(6), p. nestránkováno. ISSN 2073-4360. [Detail]

ŠOFER, Michal, Pavel ŠOFER, Marek PAGÁČ, Anastasia VOLODARSKAJA, Marek BABIUCH and Filip GRUŇ. Acoustic Emission Signal Characterisation of Failure Mechanisms in CFRP Composites Using Dual-Sensor Approach and Spectral Clustering Technique. Polymers. Basilej: MDPI Open Access Publishing, 2023, 15(1), p. nestránkováno. ISSN 2073-4360. [Detail]

RYBANSKÝ, David, Pavel MARŠÁLEK, Martin ŠOTOLA, Juraj HRONČEK, Lukáš DRAHORÁD, Ondřej KUŠNÍR and Jiri PROKOP. Design and Behavior of Lightweight Flexible Structure with Spatial Pattern Reducing Contact Surface Fraction. Polymers. MDPI Open Access Publishing, 2023, 15(19), p. 1-14. ISSN 2073-4360. [Detail]

KARTHICK, Muniyappan, Ekambaram PAVITHRA, Robert ČEP and Muniyandy ELANGOVAN. Machining of Custom-450 Grade Stainless Steel Using TiAlSiN-Coated Tungsten Carbide Tool Inserts. Processes. BASEL: MDPI Open Access Publishing, 2023, 11(4), p. nestránkováno. ISSN 2227-9717. [Detail]

SHANMUGASUNDAR, G., Kamaraj LOGESH, Robert ČEP and Ranendra ROY. Evaluating Eco-Friendly Refrigerant Alternatives for Cascade Refrigeration Systems: A Thermoeconomic Analysis. Processes. BASEL: MDPI Open Access Publishing, 2023, 11(6), p. nestránkováno. ISSN 2227-9717. [Detail]

SHANMUGASUNDAR, G., Kanak KALITA, Robert ČEP and Jasgurpreet Singh CHOHAN. Decision Models for Selection of Industrial Robots-A Comprehensive Comparison of Multi-Criteria Decision Making. Processes. BASEL: MDPI Open Access Publishing, 2023, 11(6), p. nestránkováno. ISSN 2227-9717. [Detail]

JABLONSKÁ, Jana, Milada KOZUBKOVÁ, Sylva DRÁBKOVÁ and Tomáš BLEJCHAŘ. Effect of Cavitating Hydraulic Elements on Pump Characteristics. Processes. Basilej: MDPI Open Access Publishing, 2023, 11(9), p. 1-12. ISSN 2227-9717. [Detail]

LEDVOŇ, Marian, Lumír HRUŽÍK, Adam BUREČEK, Filip DÝRR and Tomáš POLÁŠEK. Leakage Characteristics of Proportional Directional Valve. Processes. MDPI Open Access Publishing, 2023, 11(2), p. 1-13. ISSN 2227-9717. [Detail]

LEDVOŇ, Marian, Lumír HRUŽÍK, Adam BUREČEK, Tomáš POLÁŠEK, Filip DÝRR and David KOLÁŘ. Experimental and Numerical Analysis of Flow Force Acting on the Spool of Proportional Directional Valve. Processes. 2023, 11(12), p. 1-15. ISSN 2227-9717. [Detail]

JEZERSKÁ, Lucie, Veronika SASSMANOVÁ, Rostislav PROKEŠ and Daniel GELNAR. The pelletization and torrefaction of coffee grounds, garden chaff and rapeseed straw. Renewable Energy. Pergamon - Elsevier Science, Ltd., 2023, 210(21 April), p. 346-354. ISSN 0960-1481. [Detail]

DEBSKA, Luiza, Stanislav HONUS, Natalia KRAWCZYK, Lukasz J. ORMAN and Jerzy Zb. PIOTROWSKI. Thermal Comfort Analysis in the Smart Sustainable Building with Correlation Development. Rocznik Ochrony Środowiska. Środkowo-Pomorskie towarzystwo naukowe ochrony środowiska, 2023, 25(_), p. 116-127. ISSN 1506-218X. [Detail]

ORMAN, Lukasz J., Stanislav HONUS and Paulina JASTRZEBSKA. Investigation of Thermal Comfort in the Intelligent Building in Winter Conditions. Rocznik Ochrony Środowiska. Środkowo-Pomorskie towarzystwo naukowe ochrony środowiska, 2023, 25(_), p. 45-54. ISSN 1506-218X. [Detail]

KRAWCZYK, Natalia, Luiza DEBSKA, Jerzy Zb. PIOTROWSKI, Stanislav HONUS and Grzegorz MAJEWSKI. Validation of the Fanger Model and Assessment of SBS Symptoms in the Lecture Room. Rocznik Ochrony Środowiska. Środkowo-Pomorskie towarzystwo naukowe ochrony środowiska, 2023, 25(_), p. 68–76. ISSN 1506-218X. [Detail]

SNOPIŃSKI, Przemysław, Michal KOTOUL, Jindřich PETRUŠKA, Stanislav RUSZ, Krysztof ZABA and Ondřej HILŠER. Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy. Scientific Reports. Nature Publishing Group, 2023, 13(1), p. 1-16. ISSN 2045-2322. [Detail]

SCHWARZ, David, Jiří FLEIŠMAN, Radek VITÁSEK and Stanislav POLZER. Methodology for estimation of undeformed thickness of arterial tissues. Scientific Reports. New York: Nature Publishing Group, 2023, 13(1), p. nestránkováno. ISSN 2045-2322. [Detail]

KUMAR, T. Satish, Titus THANKACHAN, S. SHALINI, Robert ČEP and Kanak KALITA. Microstructure, hardness and wear behavior of ZrC particle reinforced AZ31 surface composites synthesized via friction stir processing. Scientific Reports. New York: Nature Publishing Group, 2023, 13(1), p. nestránkováno. ISSN 2045-2322. [Detail]

RAJALAKSHMI, Radhakrishnan, Sivakumar POTHIRAJ, Miroslav MAHDAL and Muniyandy ELANGOVAN. Adaptive Fuzzy Logic Deep-Learning Equalizer for Mitigating Linear and Nonlinear Distortions in Underwater Visible Light Communication Systems. Sensors. BASEL: MDPI Open Access Publishing, 2023, 23(12), p. 1-17. ISSN 1424-8220. [Detail]

GAYATHRI, Rajakumaran, Shola USHARANI, Miroslav MAHDAL, Rajasekharan VEZHAVENDHAN, Rajiv VINCENT, Murugesan RAJESH and Muniyandy ELANGOVAN. Detection and Mitigation of IoT-Based Attacks Using SNMP and Moving Target Defense Techniques. Sensors. BASEL: MDPI Open Access Publishing, 2023, 23(3), p. nestránkováno. ISSN 1424-8220. [Detail]

KOLANGIAMMAL, Shanmugam, Loganathan BALAJI and Miroslav MAHDAL. A Compact Planar Monopole UWB MIMO Antenna for Short-Range Indoor Applications. Sensors. BASEL: MDPI Open Access Publishing, 2023, 23(9), p. nestránkováno. ISSN 1424-8220. [Detail]

BALARAM, Allam, Rajendiran BABU, Miroslav MAHDAL, Dowlath FATHIMA, Neeraj PANWAR, Janjhyam Venkata Naga RAMESH and Muniyandy ELANGOVAN. Enhanced Dual-Selection Krill Herd Strategy for Optimizing Network Lifetime and Stability in Wireless Sensor Networks. Sensors. BASEL: MDPI Open Access Publishing, 2023, 23(17), p. nestránkováno. ISSN 1424-8220. [Detail]

KUMAR, S. Vishnu, G. Aloy Anuja MARY and Miroslav MAHDAL. Integrated Edge Deployable Fault Diagnostic Algorithm for the Internet of Things (IoT): A Methane Sensing Application. Sensors. BASEL: MDPI Open Access Publishing, 2023, 23(14), p. nestránkováno. ISSN 1424-8220. [Detail]

RAMESH, P. S, P SRIVANI, Miroslav MAHDAL, Lingala SIVARANJANI, Shafiqul ABIDIN, Shivakumar KAGI and Muniyandy ELANGOVAN. Contextual Cluster-Based Glow-Worm Swarm Optimization (GSO) Coupled Wireless Sensor Networks for Smart Cities. Sensors. BASEL: MDPI Open Access Publishing, 2023, 23(14), p. nestránkováno. ISSN 1424-8220. [Detail]

ANUSOOYA, Govindarajan, Selvaraj BHARATHIRAJA, Miroslav MAHDAL, Kamsundher SATHYARAJASEKARAN and Muniyandy ELANGOVAN. Self-Supervised Wavelet-Based Attention Network for Semantic Segmentation of MRI Brain Tumor. Sensors. MDPI, 2023, 23(5), p. nestránkováno. ISSN 1424-8220. [Detail]

VYSOCKÝ, Aleš, Tomáš POŠTULKA, Jakub CHLEBEK, Jan MASLOWSKI, Tomáš KOT and Stefan GRUSHKO. Hand Gesture Interface for Robot Path Definition in Collaborative Applications: Implementation and Comparative Study. Sensors. MDPI Open Access Publishing, 2023, 23(9), p. -. ISSN 1424-8220. [Detail]

OŠČÁDAL, Petr, Tomáš KOT, Tomáš SPURNÝ, Jiří SUDER, Michal VOCETKA, Dobeš LIBOR and Zdenko BOBOVSKÝ. Camera Arrangement Optimization for Workspace Monitoring in Human–Robot Collaboration. Sensors. MDPI Open Access Publishing, 2023, 23(1), p. 1-19. ISSN 1424-8220. [Detail]

HRABOVSKÝ, Leopold, Jakub GASZEK, Ladislav KOVÁŘ and Jiří FRIES. A laboratory device designed to detect and measure the resistance force of a conveyor belt diagonal plough. Trans. Gabriela CHUDAŠOVÁ. Sensors. MDPI Open Access Publishing, 2023, 23(6), p. 3137. ISSN 1424-8220. [Detail]

KAČOR, Petr, Petr BERNAT, Tomáš MLČÁK and Leopold HRABOVSKÝ. Realization of a Test Tool for Diagnosis of Contact Resistance and Measurement of Selected Types of Conductive Materials. Sensors. MDPI Open Access Publishing, 2023, 23(13)(5867), p. nestrankovano. ISSN 1424-8220. [Detail]

GADA, Saliha, Arezki FEKIK, Miroslav MAHDAL, Sundarapandian VAIDYANATHAN, Ahmed MAIDI and Ali BOUHEDDA. Improving Power Quality in Grid-Connected Photovoltaic Systems: A Comparative Analysis of Model Predictive Control in Three-Level and Two-Level Inverters. Sensors. MDPI Open Access Publishing, 2023, 23(18), p. nestránkováno. ISSN 1424-8220. [Detail]

MÁNEK, Martin and Martin FUSEK. COMPARISON OF MEASUREMENT OF ALUMINIUM ALLOY IN HIGH STRAIN RATE. Strojnícky časopis. Slovenská akademie věd, 2023, 73(2), p. 99-106. ISSN 0039-2472. [Detail]

VÝTISK, Jan, Jakub ČESPIVA, Marek JADLOVEC, Vladimír KOČÍ, Stanislav HONUS and Tadeáš OCHODEK. Life cycle assessment applied on alternative production of carbon-based sorbents – A comparative study. Sustainable Materials and Technologies. San Diego: Elsevier, 2023, 35(4), p. nestránkováno. ISSN 2214-9937. [Detail]

HRUZÍK, Lukáš, Jiří STRUŽ, Miroslav TROCHTA and Jiří ZAČAL. Unsymmetrically Distributed Bolt Axial Forces between Symmetrically Spaced Bolts of Clamping Sleeve. Symmetry. MDPI Open Access Publishing, 2023, 15(2), p. 1-17. ISSN 2073-8994. [Detail]

ZAČAL, Jiří, Zdeněk FOLTA, Jiří STRUŽ and Miroslav TROCHTA. Influence of Symmetry of Tightened Parts on the Force in a Bolted Joint. Symmetry. MDPI Open Access Publishing, 2023, 15(2), p. 1-20. ISSN 2073-8994. [Detail]

HRABOVSKÝ, Leopold, Štěpán PRAVDA, Radim ŠEBESTA, Eliška NOVÁKOVÁ and Daniel KURAČ. Detection of a rotating conveyor roller casing vibrations on a laboratory machine. Trans. Gabriela CHUDAŠOVÁ. Symmetry. MDPI Open Access Publishing, 2023, 15(9), p. nečíslováno. ISSN 2073-8994. [Detail]

HEMA, Prianka, Rejin PAUL, Lenka ČEPOVÁ, Bhola KHAN, Kailash KUMAR and Vladimíra SCHINDLEROVÁ. Complexity and Monitoring of Economic Operations Using a Game-Theoretic Model for Cloud Computing. Systems. BASEL: MDPI Open Access Publishing, 2023, 11(2), p. nestránkováno. ISSN 2079-8954. [Detail]

BALARAM, Allam, K. Nattar KANNAN, Lenka ČEPOVÁ, M. Kishore KUMAR, B. Swaroopa RANI and Vladimíra SCHINDLEROVÁ. Artificial Intelligence for Media Ecological Integration and Knowledge Management. Systems. BASEL: MDPI Open Access Publishing, 2023, 11(5), p. nestránkováno. ISSN 2079-8954. [Detail]

SRIVASTAVA, Ashish Kumar, Akash NAG, Suryank DWIVEDI, Amit Rai DIXIT and Sergej HLOCH. Effect of eggshell powder on the microstructural and thermal behavior of Al7075/waste eggshell surface composites produced by solid-state friction stir processing developed for potential thermal applications. The international journal of advanced manufacturing technology. Vídeň: Springer, 2023, 127(25 MAY 2023), p. 1243-1261. ISSN 0268-3768. [Detail]

DIXIT, A.R., A.K. SRIVASTAVA, S. DWIVEDI, Akash NAG and Sergej HLOCH. An investigation on microstructural features and bonding strength of magnesium-based multifunctional laminated composite developed by friction stir additive manufacturing. The international journal of advanced manufacturing technology. Vídeň: Springer, 2023, 128(09/2023), p. 531-546. ISSN 0268-3768. [Detail]

KLICHOVA, D., Akash NAG, J. POLOPRUDSKÝ, J. FOLDYNA, F. PUDE, L. SITEK and S. HLOCH. Utilising of water hammer effect for surface roughening of Ti6Al4V. The international journal of advanced manufacturing technology. Vídeň: Springer, 2023, 126(06/2023), p. 5633-5647. ISSN 0268-3768. [Detail]

MOURALOVA, K., L. BENES, T. PROKES, R. ZAHRADNICEK, Jiří FRIES and T. PLICHTA. Analysis of the machinability of different types of sintered carbides with WEDM in both water and oil baths. The international journal of advanced manufacturing technology. Vídeň: Springer, 2023, 1(1), p. nestránkováno. ISSN 0268-3768. [Detail]

PAWLENKA, Tomáš, Martin JURÁNEK, Pavel KLAUS, Marek BESEDA, Michal BURÁŇ, Miroslav SUCHÁNEK, Petr SEHNOUTKA and Jiří KULHÁNEK. Compact automatic controlled internal combustion engine cogeneration system based on natural gas with waste heat recovery from the combustion process. Thermal Science and Engineering Progress. San Diego: Elsevier, 2023, 44(1. září 2023), p. 1-12. ISSN 2451-9049. [Detail]

CHLUPOVA, Alice, Sergej HLOCH, Akash NAG, Ivo SULAK and Tomas KRUML. Effect of pulsating water jet processing on erosion grooves and microstructure in the subsurface layer of 25CrMo4 (EA4T) steel. Wear. Lausanne: Elsevier Science SA, 2023, 524(204774), p. nestránkováno. ISSN 0043-1648. [Detail]

HIRMAN, David and Vladimír HERŠKOVIČ. Odsávání Hrubé třídírny – výměna technologie. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2023, 1(3/2023), p. 16 - 24. ISSN 1213-1660. [Detail]

HIRMAN, David. Odhad nejistoty gravimetrického stanovení hmotnostní koncentrace suspendovaných částic PM10. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2023, 1(3/2023), p. 25 - 30. ISSN 1213-1660. [Detail]

HIRMAN, David and Vladimír HERŠKOVIČ. Instalace protivětrných stěn na Úpravně uhlí Ledvice – objekt Hlubinný zásobník I a II. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2023, 3(10/2023), p. 28 - 34. ISSN 1213-1660. [Detail]

FRYDRYCH, Jan, Lenka BRADÁČOVÁ, Lucie JEZERSKÁ and Veronika SASSMANOVÁ. Výzkum možností využití jílku vytrvalého pro energetické účely. Úroda. Profi Press, 2023, 12(LXX), p. 237-246. ISSN 0139-6013. [Detail]

HLAVATÁ, Barbara, Petr HLAVATÝ, Lucie KREJČÍ, Jindřich KOZÁK, Ivo HLAVATÝ, Madhulika SRIVASTAVA, Sergej HLOCH and Jakub KOTZOT. Assessment of Abrasive Tests of Solders with Inserted Tungsten Carbides. Trans. Karolína SLÁMOVÁ. 2023, p. null. [Detail]

ŠIMONOVÁ, Zuzana, Veronika KRBEČKOVÁ, Zuzana VILAMOVÁ, Edmund DOBROČKA, Bořivoj KLEJDUS, Miroslav CIESLAR, Ladislav SVOBODA, Jiří BEDNÁŘ, Richard DVORSKÝ and Jana SEIDLEROVÁ. The Effects of Nature-Inspired Synthesis on Silver Nanoparticle Generation. ACS Omega. American Chemical Society, 2022, 7(6), p. 4850 - 4858. ISSN 2470-1343. [Detail]

SKOTNICZNY, Marcin, Dawid CEKUS, Pawel KWIATON and Michal ŠOFER. The Use of Lagrange Multiplier Formalism to Solve the Problem of Transverse Vibrations of the Lower-Limb Exoskeleton. Acta Physica Polonica A. Zabrze: Polish Academy of Sciences, 2022, 142(1), p. 133-136. ISSN 0587-4246. [Detail]

KUNČICKÁ, Lenka, Radim KOCICH, Gergely NÉMETH, Karel DVOŘÁK and Marek PAGÁČ. Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion. Additive Manufacturing. 2022, 59(November), p. 103128. ISSN 2214-8604. [Detail]

MURTAJA, Yousef, Lubomir LAPČÍK, Barbora LAPČÍKOVÁ, Shweta GAUTAM, Martin VAŠINA, Lubomir SPANHEL and Jakub VLČEK. Intelligent high-tech coating of natural biopolymer layers. Advances in Colloid and Interface Science. San Diego: Elsevier, 2022, 304(June), p. 1-11. ISSN 0001-8686. [Detail]

VONDRÁK, Jaroslav, Marek PENHAKER and František JUREK. Selected transformation methods and their comparison for VCG leads deriving. Alexandria Engineering Journal. San Diego: Elsevier, 2022, Volume 61(5), p. 3475-3485. ISSN 1110-0168. [Detail]

PASTOR, Robert, Milan MIHOLA, Zdeněk ZEMAN and Adam BOLESLAVSKÝ. Knowledge-Based Automated Mechanical Design of a Robot Manipulator. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(12), p. nestránkováno. ISSN 2076-3417. [Detail]

WALICA, Dominik and Petr NOSKIEVIČ. Application of the MiL and HiL Simulation Techniques in Stewart Platform Control Development. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(5), p. nestránkováno. ISSN 2076-3417. [Detail]

PREMALATHA, Mariappan, Vadivel VISWANATHAN and Lenka ČEPOVÁ. Application of Semantic Analysis and LSTM-GRU in Developing a Personalized Course Recommendation System. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(21), p. nestránkováno. ISSN 2076-3417. [Detail]

VLČKOVÁ, Kateřina, Karel FRYDRÝŠEK, Vojtěch BAJTEK, Jiří DEMEL, Leopold PLEVA, Miroslav HAVLÍČEK, Jana POMETLOVÁ, Roman MADEJA, Jiří KRATOCHVÍL, Pavel KRPEC, Pawel OSEMLAK, Kristina ČABANOVÁ, Eva OLŠOVSKÁ and Jana VACULOVÁ. Analytical, Stochastic and Experimental Solution of the Osteosynthesis of the Fifth Metatarsal by Headless Screw. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(19), p. nestránkováno. ISSN 2076-3417. [Detail]

WILLIAM, Mathias Vijay Albert, Subramanian RAMESH, Robert ČEP, Mahalingam Siva KUMAR and Muniyandy ELANGOVAN. MFO Tunned SVR Models for Analyzing Dimensional Characteristics of Cracks Developed on Steam Generator Tubes. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(23), p. nestránkováno. ISSN 2076-3417. [Detail]

LUKIC, Dejan, Robert ČEP, Mijodrag MILOSEVIC, Aco ANTIC, Aleksandar ZIVKOVIC, Vladimir TODIC and Dragan RODIC. A Grey Fuzzy Approach to the Selection of Cutting Process from the Aspect of Technological Parameters. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(24), p. nestránkováno. ISSN 2076-3417. [Detail]

FRYDRÝŠEK, Karel, Ondřej SKOUPÝ, Ivan MRKVICA, Aneta SLANINKOVÁ, Jiří KRATOCHVÍL, Tibor JURGA, Miroslav VLK, Pavel KRPEC, Roman MADEJA, Miroslav HAVLICEK, Dana STANCEKOVA, Jana POMETLOVA and Josef HLINKA. Stochastic Evaluation of Cutting Tool Load and Surface Quality during Milling of HPL. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(24), p. nestránkováno. ISSN 2076-3417. [Detail]

SEJDA, František, Karel FRYDRÝŠEK, Leopold PLEVA, Martin POMPACH, Josef HLINKA, Marek SADÍLEK, Zuzana MURCINKOVA, Pavel KRPEC, Miroslav HAVLICEK, Roman MADEJA, Jana POMETLOVA, Oldřich UČEŇ and Kamila DOSTÁLOVÁ. Numerical Analysis of the Calcaneal Nail C-NAIL. Applied Sciences. BASEL: MDPI Open Access Publishing, 2022, 12(10), p. nestránkováno. ISSN 2076-3417. [Detail]

FRYDRÝŠEK, Karel, M. ŠÍR, L. PLEVA, J. SZELIGA, J. STRÁNSKÝ, Daniel ČEPICA, Jiří KRATOCHVÍL, J. KOUTECKÝ, R. MADEJA, Kateřina PETEREK DĚDKOVÁ and D. STANČEKOVÁ. Stochastic Strength Analyses of Screws for Femoral Neck Fractures. Applied Sciences. Basilej: MDPI Open Access Publishing, 2022, 12(3), p. nestránkováno. ISSN 2076-3417. [Detail]

FRYDRÝŠEK, Karel, Daniel ČEPICA, Tomáš HALO, Ondřej SKOUPÝ, Leopold PLEVA, Roman MADEJA, Jana POMETLOVÁ, Monika LOSERTOVÁ, Jan KOUTECKÝ, Pavel MICHAL, Vojtěch HAVLAS, Šimon KRAUS, Dominik ĎURICA, Kateřina PETEREK DĚDKOVÁ, Marek PAGÁČ, Pavel KRPEC and Paweł OSEMLAK. Biomechanical Analysis of Staples for Epiphysiodesis. Applied Sciences. Basilej: MDPI Open Access Publishing, 2022, 12(2), p. nestránkováno. ISSN 2076-3417. [Detail]

FRYDRÝŠEK, Karel, Tomáš HALO, Daniel ČEPICA, Vojtěch MACHALLA, Kateřina VLČKOVÁ, Ondřej SKOUPÝ, Roman MADEJA, Miroslav HAVLÍČEK, Kamila DOSTÁLOVÁ, Antonín TREFIL, Leopold PLEVA, Zuzana MURČINKOVÁ, Pavel KRPEC and Josef HLINKA. Biomechanical Assessment of Cannulated Nails for the Treatment of Proximal Femur Fractures. Applied Sciences. Basilej: MDPI Open Access Publishing, 2022, 12(15), p. nestránkováno. ISSN 2076-3417. [Detail]

ROJÍČEK, Jaroslav, Zbyněk PAŠKA, Martin FUSEK, Jakub CIENCIALA and Dagmar LIČKOVÁ. Finite Element Simulation of HELICOIL® Inserts. Applied Sciences. Basilej: MDPI Open Access Publishing, 2022, 12(22), p. nestránkováno. ISSN 2076-3417. [Detail]

TIWARI, Tanmay, Akash NAG, Alokesh PRAMANIK and Amit Rai DIXIT. A comparative study of spark assisted bending process using teaching-learning based optimization, desirability approach and genetic algorithm. Applied Soft Computing. San Diego: Elsevier, 2022, 130(November 2022), p. nestránkováno. ISSN 1568-4946. [Detail]

ŠARKAN, Branislav, Michal LOMAN, Šimon SENKO, Michal RICHTÁŘ and Wojciech GOLEBIOWSKI. Change in engine power in the event of electronic components failures. Archives of Automotive Engineering. Sieć Badawcza Łukasiewicz – Przemysłowy Instytut Motoryzacji, 2022, Volume 98(Issue 4), p. 40-55. ISSN 2084-476X. [Detail]

CEKUS, Dawid, Pawel KWIATON, Michal ŠOFER and Pavel ŠOFER. Application of heuristic methods to the identification of the parameters of discrete-continuous models. Bulletin of the Polish Academy of Sciences: Technical Sciences. Varšava: Polska akademia nauk (PAN), 2022, 70(1), p. nestránkováno. ISSN 0239-7528. [Detail]

GARUS, Sebastian, Bartlomiej BLACHOWSKI, Wojciech SOCHACKI, Anna JASKOT, Pawel KWIATON, Mariusz OSTROWSKI, Michal ŠOFER and Tomasz KAPITANIAK. Mechanical vibrations: recent trends and engineering applications. Bulletin of the Polish Academy of Sciences: Technical Sciences. Varšava: Polska akademia nauk (PAN), 2022, 70(1), p. nestránkováno. ISSN 0239-7528. [Detail]

LAMPART, Marek, Alžběta LAMPARTOVÁ and Giuseppe ORLANDO. On extensive dynamics of a Cournot heterogeneous model with optimal response. CHAOS. MELVILLE: AIP Publishing, 2022, 32(2), p. nestránkováno. ISSN 1054-1500. [Detail]

KRZIKALLA, David, Jakub MĚSÍČEK, Radim HALAMA, Jiří HAJNYŠ, Marek PAGÁČ, Tomáš ČEGAN and Jana PETRŮ. On Flexural Properties of Additive Manufactured Composites: Experimental, and Numerical Study. COMPOSITES SCIENCE AND TECHNOLOGY. Elsevier Ltd, 2022, 218(109182), p. nestránkováno. ISSN 0266-3538. [Detail]

GAZE, Błażej, Bernard KNUTEL, Mateusz JAJCZYK, Ondřej NĚMČEK, Tomáš NAJSER and Jan KIELAR. Influence of the Use of Permanent Catalytic Systems on the Flue Gases Emission from Biomass Low-Power Boilers. Catalysts. MDPI Open Access Publishing, 2022, 12(7), p. nestránkováno. ISSN 2073-4344. [Detail]

JASTRZEMBSKI, Tomáš, Jan POLEDNÍK, Jan SKŘÍNSKÝ and David RYBANSKÝ. Flashpoint of Battery Mixtures in Order to Improve their Safety. Chemical Engineering Transactions. Milano: The Italian Association of Chemical Engineering, 2022, 90(02), p. 121-126. ISBN 978-88-95608-27-3. [Detail]

POLEDNÍK, Jan, Tomáš JASTRZEMBSKI, David RYBANSKÝ and Jan SKŘÍNSKÝ. Autoignition Temperature of Alcohol/air mixtures. Chemical Engineering Transactions. Milano: The Italian Association of Chemical Engineering, 2022, 90(02/2022), p. 235-240. ISBN 978-88-95608-27-3. [Detail]

PROKOP, Jiří, Pavel MARŠÁLEK, Ilker SENGUL, Anton PELIKÁN, Jana JANOUTOVÁ, Petr HORYL, Jan ROMAN, Demet SENGUL and Soares JOSÉ MARIA JUNIOR. Evaluation of breast stiffness pathology based on breast compression during mammography: Proposal for novel breast stiffness scale classification. Clinics. 2022, 77(1), p. 1-12. ISSN 1807-5932. [Detail]

MRKVICA, Ivan, Tomáš SZOTKOWSKI, Aneta SLANINKOVÁ and Tibor JURGA. High-Efficiency of PVD Coating Process by Applying an Additional Rotation. Coatings. Basilej: MDPI Open Access Publishing, 2022, 12(6), p. nestránkováno. ISSN 2079-6412. [Detail]

SAXENA, M., A.K. SHARMA, A.K. SRIVASTAVA, R.K. SINGH, A.R. DIXIT, Akash NAG and Sergej HLOCH. Microwave-Assisted Synthesis, Characterization and Tribological Properties of a g-C3N4/MoS2 Nanocomposite for Low Friction Coatings. Coatings. Basilej: MDPI Open Access Publishing, 2022, 12(12), p. nestránkováno. ISSN 2079-6412. [Detail]

KUMAR, Nitesh, Rakesh Kumar SINGH, Ashish Kumar SRIVASTAVA, Akash NAG, Jana PETRŮ and Sergej HLOCH. Surface Modification and Parametric Optimization of Tensile Strength of Al6082/SiC/Waste Material Surface Composite Produced by Friction Stir Processing. Coatings. Basilej: MDPI Open Access Publishing, 2022, 12(12), p. nestránkováno. ISSN 2079-6412. [Detail]

HRABOVSKÝ, Leopold, Jiří FRIES, Lukáš KUDRNA and Jakub GASZEK. Determination of the coefficient of friction in a pulley groove by the indirect method. Coatings. MDPI Open Access Publishing, 2022, 12(5), p. 606. ISSN 2079-6412. [Detail]

KRAISNIK, Milija, Robert ČEP, Karel KOURIL, Sebastian BALOS, Aco ANTI and Mladomir MILUTINOVIC. Characterization of Microstructural Damage and Failure Mechanisms in C45E Structural Steel under Compressive Load. Crystals. BASEL: MDPI Open Access Publishing, 2022, 12(3), p. nestránkováno. ISSN 2073-4352. [Detail]

PLASEK, Marek, Michaela MASAROVA, Marian BOJKO, Pavel KOMINEK, Petr MATOUSEK and Martin FORMANEK. Computational Fluid Dynamics Could Enable Individualized Surgical Treatment of Nasal Obstruction (A Preliminary Study). Diagnostics. BASEL: MDPI Open Access Publishing, 2022, 12(11), p. 1-9. ISSN 2075-4418. [Detail]

KOLANGIAMMAL, Shanmugam, Loganathan BALAJI and Miroslav MAHDAL. Design of Compact Planar Monopole UWB MIMO Antenna with Four Orthogonal Elements and Tapered Fed Configuration for Wireless Diversity Applications. Electronics. BASEL: MDPI Open Access Publishing, 2022, 11(19), p. nestránkováno. ISSN 2079-9292. [Detail]

PANDYA, S.B, J. VISUMATHI, Miroslav MAHDAL, T.K. MAHANTA and P. JANGIR. A Novel MOGNDO Algorithm for Security-Constrained Optimal Power Flow Problems. Electronics. Basilej: MDPI Open Access Publishing, 2022, 11(22), p. nestránkováno. ISSN 2079-9292. [Detail]

ELANGOVAN, Muniyandy, Baskaran SRIMANICKAM, Robert ČEP, Amirtharajan SARANYA and Manickam RAMACHANDRAN. Experimental Study of a Hybrid Solar Collector Using TiO2/Water Nanofluids. Energies. BASEL: MDPI Open Access Publishing, 2022, 15(12), p. nestránkováno. ISSN 1996-1073. [Detail]

ČÁRSKÝ, Milan, Olga ŠOLCOVÁ, Karel SOUKUP, Tomáš KRALIK, Kamila VÁVROVÁ, Lukáš JANOTA, Miroslav VÍTEK, Stanislav HONUS, Marek JADLOVEC and Lenka WIMMEROVÁ. Techno-Economic Analysis of Fluidized Bed Combustion of a Mixed Fuel from Sewage and Paper Mill Sludge. Energies. MDPI Open Access Publishing, 2022, 15(23), p. 1-13. ISSN 1996-1073. [Detail]

RŮŽIČKOVÁ, Jana, Helena RACLAVSKÁ, Dagmar JUCHELKOVÁ, Marek KUCBEL, Konstantin RACLAVSKÝ, Barbora ŠVÉDOVÁ, Michal ŠAFÁŘ, C PFEIFER and J. HRBEK. Organic compounds in the char deposits characterising the combustion of unauthorised fuels in residential boilers. Energy. San Diego: Elsevier, 2022, 257(124724), p. nestránkováno. ISSN 0360-5442. [Detail]

HONUS, Stanislav, Zdeněk ŠMÍDA, Marek JADLOVEC, Jan VÝTISK and Mojmír VRTEK. Verification of the analytical design model of a subcritical air ejector and assessment of the behavior of the manufactured machine under different operating conditions. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. Taylor & Francis, 2022, 44(3), p. 8024-8039. ISSN 1556-7036. [Detail]

ČESPIVA, Jakub, Marek JADLOVEC, Jan VÝTISK, Jana SERENČÍŠOVÁ, Tadeáš OCHODEK and Stanislav HONUS. Softwood and solid recovered fuel gasification residual chars as sorbents for flue gas mercury capture. Environmental Technology & Innovation. Elsevier, 2022, 29(únor), p. 1-16. ISSN 2352-1864. [Detail]

ŠIMONOVÁ, Zuzana, Ludmila PORUBOVÁ, Adam VERNER, Roman GABOR, Zuzana VILAMOVÁ, Edmund DOBROČKA, Miroslav CIESLAR, Veronika KRBEČKOVÁ, Kateřina PETEREK DĚDKOVÁ, Ladislav SVOBODA, Jiří BEDNÁŘ, Richard DVORSKÝ and Jana SEIDLEROVÁ. Simple Fabrication of Polycaprolactone-co-lactide Membrane with Silver Nanowires: Synthesis, Characterization and Cytotoxicity Studies. Fibers and Polymers. SEOUL: Korean Fiber Society, 2022, 23(11), p. 2983-2993. ISSN 1229-9197. [Detail]

KRATOCHVÍLOVÁ, Alena, Richardos Nikolaos SALEK, Martin VAŠINA, Eva LORENCOVÁ, Vendula KŮROVÁ, Zuzana LAZÁRKOVÁ, Jolana DOSTÁLOVÁ and Jana ŠENKÝŘOVÁ. The Impact of Different Hydrocolloids on the Viscoelastic Properties and Microstructure of Processed Cheese Manufactured without Emulsifying Salts in Relation to Storage Time. Foods. 2022, 11(22), p. 1-13. ISSN 2304-8158. [Detail]

KOT, Tomáš, Rostislav WIERBICA, Petr OŠČÁDAL, Tomáš SPURNÝ and Zdenko BOBOVSKÝ. Using Elastic Bands for Collision Avoidance in Collaborative Robotics. IEEE Access. Vienna: IEEE, 2022, 10(10), p. 106972-106987. ISSN 2169-3536. [Detail]

VYSOCKÝ, Aleš, Stefan GRUSHKO, Tomáš SPURNÝ, Robert PASTOR and Tomáš KOT. Generating Synthetic Depth Image Dataset for Industrial Applications of Hand Localization. IEEE Access. Vienna: IEEE, 2022, 10(10/2022), p. 99734-99744. ISSN 2169-3536. [Detail]

HUCZALA, Daniel, Tomáš KOT, Martin PFURNER, Václav KRYS and Zdenko BOBOVSKÝ. Multirepresentations and Multiconstraints Approach to the Numerical Synthesis of Serial Kinematic Structures of Manipulators. IEEE Access. IEEE, 2022, 10(24 June 2022), p. 68937-68951. ISSN 2169-3536. [Detail]

SMUTNÝ, Pavel. Learning with virtual reality: a market analysis of educational and training applications. Interactive Learning Environments. Abingdon: Routledge Taylor & Francis Group, 2022, 30(1), p. nestránkováno. ISSN 1049-4820. [Detail]

GASSER, T. Christian, Christopher MILLER, Stanislav POLZER and Joy ROY. A quarter of a century biomechanical rupture risk assessment of abdominal aortic aneurysms. Achievements, clinical relevance, and ongoing developments. International Journal for Numerical Methods in Biomedical Engineering. Čeng-čou: Wiley, 2022, p. nestránkováno. ISSN 2040-7939. [Detail]

FILIP, Jurić, Coelho PEDRO J., Peter PRIESCHING, Neven DUIĆ, Stanislav HONUS and Milan VUJANOVIĆ. Implementation of the spectral line-based weighted-sum-of-gray-gases model in the finite volume method for radiation modeling in internal combustion engines. International Journal of Energy Research. Wiley, 2022, p. 1-14. ISSN 0363-907X. [Detail]

LAPCIK, Lubomir, Barbora LAPCIKOVA, Shweta GAUTAM, Martin VAŠINA, Tomáš VALENTA, David ŘEPKA, Klára ČÉPE and Ondrej RUDOLF. Acoustic and mechanical testing of commercial cocoa powders. International Journal of Food Properties. Oslo: Taylor & Francis, 2022, 25(1), p. 2184-2197. ISSN 1094-2912. [Detail]

ŘEHOŘ, Michal, Jiří ZÁRUBA, Petr VRÁBLIK, František HELEBRANT and Pavel SCHMIDT. HISTORY OF CLIMATE DEVELOPMENT AND EVALUATION OF IMPACTS OF CLIMATE CHANGE ON MINING AND RECLAMATION IN THE MOST BASIN - RESEARCH RESULTS AND PROPOSED ADAPTATION MEASURES. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM. Volume 22, Issue 5.1. STEF92 Technology Ltd., 2022, 2022(5.1), p. 219-226. ISSN 1314-2704. [Detail]

KUNZ, Petr and Ulf RICHTER. Green conveyor systems driven by slow-speed gearless drives,. International mining. Team Publishing, 2022, APRIL 2022(4), p. 44-45. ISSN 1747-146X. [Detail]

SNOPIŃSKI, Przemysław, Kira MATUS, František TATÍČEK and Stanislav RUSZ. Overcoming the strength-ductility trade-off in additively manufactured AlSi10Mg alloy by ECAP processing. Journal of Alloys and Compounds. Elsevier Science SA, 2022, 918(OCT 15 2022), p. 1-8. ISSN 0925-8388. [Detail]

NESLUSAN, Miroslav, Pavel MINARIK, Robert ČEP, Juraj URICEK, Karel TROJAN, Nikolaj GANEV and Libor TRSKO. Barkhausen noise emission of AISI 304 stainless steel originating from strain induced martensite by shot peening. Journal of Materials Research and Technology. San Diego: Elsevier, 2022, 20(October), p. 748-762. ISSN 2238-7854. [Detail]

MAZIARZ, W., Miroslav GREGER, P. DŁUGOSZ, J. DUTKIEWICZ, A. WÓJCIK, Ł. ROGAL, K. STAN-GŁOWIŃSKA, Ondřej HILŠER, Martin PASTRŇÁK, Lubomír ČÍŽEK and Stanislav RUSZ. Effect of severe plastic deformation process on microstructure and mechanical properties of AlSi/SiC composite. Journal of Materials Research and Technology. San Diego: Elsevier, 2022, 17(1), p. 948-960. ISSN 2238-7854. [Detail]

SADÍLEK, Marek, Robert ČEP, Lenka ČEPOVÁ, Lukáš KUŠNÍR, Patrik SNIEHOTTA, Katarzyna CZERNÁ and Hana ŠTVERKOVÁ. Production Quality of Shaped Surfaces During Milling. Journal on Systemics, Cybernetics and Informatics. International Institute of Informatics and Systemics, 2022, 20(1), p. 191-208. ISSN 1690-4524. [Detail]

GREGER, Miroslav, Oskar KWARTENG, Stanislav RUSZ and Jiří ŠVEC. Výroba výkovků a tepelné zpracování ocelových válců. Kovárenství. Svaz kováren ČR, 2022, 76(červen), p. 32-38. ISSN 1213-9289. [Detail]

LAPCIKOVA, Barbora, Lubomir LAPCIK, Richardos SALEK, Tomas VALENTA, Eva LORENCOVA and Martin VAŠINA. Physical characterization of the milk chocolate using whey powder. LWT - Food Science and Technology. San Diego: Elsevier, 2022, 154(15 January 2022), p. 1-9. ISSN 0023-6438. [Detail]

KUNZ, Petr. Snižování hlučnosti dálkové pásové dopravy. Lomy a těžba. Vladimíra Štěpánková, 2022, 1/2022(1), p. 26-27. ISSN 1805-2304. [Detail]

LUTOVINOV, Maxim, Radim HALAMA, Jan PAPUGA, Michal BARTOSAK, Jiri KUZELKA and Milan RUZICKA. An Approximate Method for Calculating Elastic-Plastic Stress and Strain on Notched Specimens. MATERIALS. BASEL: MDPI, 2022, 15(4), p. nestránkováno. ISSN 1996-1944. [Detail]

LAPČÍK, Lubomír, Martin VAŠINA, Barbora LAPČÍKOVÁ, Adam BUREČEK and Lumír HRUŽÍK. Effect of rapeseed oil on the rheological, mechanical and thermal properties of plastic lubricants. MECHANICS OF TIME-DEPENDENT MATERIALS. Vídeň: Springer, 2022, 26(1), p. 33-47. ISSN 1385-2000. [Detail]

BOLESLAVSKÝ, Adam, Milan MIHOLA, Rostislav WIERBICA, Jan BÉM and Tomáš SPURNÝ. RESEARCH AND DEVELOPMENT OF A SOFTWARE TOOL FOR PARAMETRIC MODELING OF ROBOTIZED WORKPLACES. MM Science Journal. Praha: MM Publishing, 2022, 2022(Červen 2022), p. 5675-5683. ISSN 1803-1269. [Detail]

NOSKIEVIČ, Petr and Dominik WALICA. DEVELOPMENT AND APPLICATION OF THE DIGITAL TWIN OF THE HYDRAULIC CONTROL VALVE. MM Science Journal. Praha: MM Publishing, 2022, October(2022-October), p. 5754-5758. ISSN 1803-1269. [Detail]

DÝRR, Filip, Lukáš DVOŘÁK, Kamil FOJTÁŠEK, Petr BRZEZINA, Lumír HRUŽÍK and Adam BUREČEK. EXPERIMENTAL ANALYSIS OF FLUIDIC MUSCLES. MM Science Journal. Praha: MM Publishing, 2022, 2022(OCTOBER), p. 5759-5763. ISSN 1803-1269. [Detail]

VAŠINA, Martin, Marek POSCHL, Lumír HRUŽÍK, Adam BUREČEK, Kamila KOTRASOVA and Eva KORMANIKOVA. STUDY OF FACTORS INFLUENCING VIBRO- ISOLATING PROPERTIES OF MATERIALS FOR PASSIVE ELASTIC BEARING OF MACHINES. MM Science Journal. Praha: MM Publishing, 2022, 2022(OCT 2022), p. 5825-5830. ISSN 1803-1269. [Detail]

PAŠKA, Zbyněk, Jaroslav ROJÍČEK, Martin FUSEK, František FOJTÍK, Dagmar LIČKOVÁ and Jakub CIENCIALA. MOUNTING FOAMS : MAKING OF SPECIMENS AND MECHANICAL TESTING. MM Science Journal. Praha: MM Publishing, 2022, 2022(10/2022), p. 5893-5900. ISSN 1803-1269. [Detail]

ZEMAN, Zdeněk, Milan MIHOLA, Jiří SUDER and Adam BOLESLAVSKÝ. Automation of partial tasks in the design of robotic arms. MM Science Journal. MM Publishing, 2022, 2022(Březen 2022), p. 5513-5521. ISSN 1803-1269. [Detail]

HRABOVSKÝ, Leopold, Oldřich UČEŇ, Lukáš KUDRNA, Daniel ČEPICA and Karel FRYDRÝŠEK. Laboratory device detecting tensile forces in the rope and coefficient of friction in the rope sheave groove. Trans. Gabriela CHUDAŠOVÁ. Machines. MDPI Open Access Publishing, 2022, 10(7), p. 1-23. ISSN 2075-1702. [Detail]

MIKOVÁ, Ľubica, Erik PRADA, Michal KELEMEN, Václav KRYS, Roman MYKHAILYSHYN, Peter ján SINČÁK, Tomáš MERVA and Lukáš LEŠTACH. Upgrade of Biaxial Mechatronic Testing Machine for Cruciform Specimens and Verification by FEM Analysis. Machines. MDPI Open Access Publishing, 2022, Volume 10(Issue 10), p. 1-29. ISSN 2075-1702. [Detail]

BERNAT, Rastislav, Jozef ZARNOVSKY, Ivan KOVAC, Rastislav MIKUS, Jiří FRIES and Radoslav CSINTALAN. Microanalysis of Worn Surfaces of Selected Rotating Parts of an Internal Combustion Engine. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(1), p. nestránkováno. ISSN 1996-1944. [Detail]

CILLIKOVA, Maria, Anna MICIETOVA, Robert ČEP, Martina JACKOVA, Peter MINARIK, Miroslav NESLUSAN and Karel KOURIL. Analysis of Surface State after Turning of High Tempered Bearing Steel. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(5), p. nestránkováno. ISSN 1996-1944. [Detail]

DAUD, Muhammad Usama, Ghulam ABBAS, Muhammad AFZAAL, Muhammad Yasin NAZ, Nazma Goher FATIMA, Abdul GHUFFAR, Muhammad IRFAN, Mater H MAHNASHI, Stanislaw LEGUTKO, Jiří KRATOCHVÍL, Usama Muhammad NIAZI and Jana PETRŮ. Finite Element Analysis of Silver Nanorods, Spheres, Ellipsoids and Core-Shell Structures for Hyperthermia Treatment of Cancer. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(5), p. nestránkováno. ISSN 1996-1944. [Detail]

AZEEM, Muhammad, Muhammad IRFAN, Manzar MASUD, Gulfam Ul REHMAN, Haider ALI, Muhammad Umair ALI, Amad ZAFAR, Usama MUHAMMAD NIAZI, Saifur RAHMAN, Stanislaw LEGUTKO, Jana PETRŮ and Jiří KRATOCHVÍL. Experimental and Numerical Investigation of Effect of Static and Fatigue Loading on Behavior of Different Double Strap Adhesive Joint Configurations in Fiber Metal Laminates. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(5), p. nestránkováno. ISSN 1996-1944. [Detail]

RUBI, C. Sarala, J. Udaya PRAKASH, Robert ČEP and Muniyandy ELANGOVAN. Optimization of Process Variables in the Drilling of LM6/B4C Composites through Grey Relational Analysis. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(14), p. nestránkováno. ISSN 1996-1944. [Detail]

JOCH, Richard, Michal SAJGALIK, Andrej CZAN, Jozef HOLUBJAK, Miroslav CEDZO and Robert ČEP. Effects of Process Cutting Parameters on the Ti-6Al-4V Turning with Monolithic Driven Rotary Tool. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(15), p. nestránkováno. ISSN 1996-1944. [Detail]

RAMASAMY, Ashok, Sundaram MUNIYASAMY, Robert ČEP and Muniyandy ELANGOVAN. Identification of Fibre Content in Edible Flours Using Microwave Dielectric Cell: Concise Review and Experimental Insights. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(16), p. nestránkováno. ISSN 1996-1944. [Detail]

SARANRAJ, Iyyanar, Sudalaimuthu GANESAN, Lenka ČEPOVÁ, Muniyandy ELANGOVAN and Libor BERANEK. Microstructure, Mechanical and Wear Behaviour of Deep Cryogenically Treated EN 52 Silchrome Valve Steel. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(16), p. nestránkováno. ISSN 1996-1944. [Detail]

SIVAPRAKASAM, Palani, Esayas ABEBE, Robert ČEP and Muniyandy ELANGOVAN. Thermo-Mechanical Behavior of Aluminum Matrix Nano-Composite Automobile Disc Brake Rotor Using Finite Element Method. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(17), p. nestránkováno. ISSN 1996-1944. [Detail]

GEVORKYAN, Edwin, Lenka ČEPOVÁ, Miroslaw RUCKI, Volodymyr NERUBATSKYI, Dmitrij MOROZOW, Wojciech ZUROWSKI, Voskan BARSAMYAN and Karel KOURIL. Activated Sintering of Cr2O3-Based Composites by Hot Pressing. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(17), p. nestránkováno. ISSN 1996-1944. [Detail]

MA QUOC, Phu, Jakub MĚSÍČEK, František FOJTÍK, Jiří HAJNYŠ, Pavel KRPEC, Marek PAGÁČ and Jana PETRŮ. Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(17), p. nestránkováno. ISSN 1996-1944. [Detail]

GEL'ATKO, Matus, Michal HATALA, Frantisek BOTKO, Radoslav VANDZURA and Jiří HAJNYŠ. Eddy Current Testing of Artificial Defects in 316L Stainless Steel Samples Made by Additive Manufacturing Technology. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(19), p. nestránkováno. ISSN 1996-1944. [Detail]

KOSARAC, Aleksandar, Robert ČEP, Miroslav TROCHTA, Milos KNEZEV, Aleksandar ZIVKOVIC, Cvijetin MLADJENOVIC and Aco ANTIC. Thermal Behavior Modeling Based on BP Neural Network in Keras Framework for Motorized Machine Tool Spindles. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(21), p. nestránkováno. ISSN 1996-1944. [Detail]

PIASECKI, Adam, Mateusz KOTKOWIAK, Maciej TULINSKI and Robert ČEP. Tribological Properties of Cu-MoS2-WS2-Ag-CNT Sintered Composite Materials. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(23), p. nestránkováno. ISSN 1996-1944. [Detail]

MUNIR, Muhammad Adnan, Muhammad Yasin NAZ, Shazia SHUKRULLAH, Muhammad Tamoor ANSAR, Muhammad Umar FAROOQ, Muhammad IRFAN, Salim Nasar Faraj MURSAL, Stanislaw Czeslaw LEGUTKO, Jana PETRŮ and Marek PAGÁČ. Enhancement of Magnetic and Dielectric Properties of Ni0.25Cu0.25Zn0.50Fe2O4 Magnetic Nanoparticles through Non-Thermal Microwave Plasma Treatment for High-Frequency and Energy Storage Applications. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(19), p. nestránkováno. ISSN 1996-1944. [Detail]

RAHMAN, Saifur, Rehan KHAN, Usama Muhammad NIAZI, Stanislaw Czeslaw LEGUTKO, Muhammad Ali KHAN, Bilal Anjum AHMED, Jana PETRŮ, Jiří HAJNYŠ and Muhammad IRFAN. Performance Prediction of Erosive Wear of Steel for Two-Phase Flow in an Inverse U-Bend. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(16), p. nestránkováno. ISSN 1996-1944. [Detail]

SHEHERYAR, Muhammad, Muhammad Ali KHAN, Syed Husain Imran JAFFERY, Mansoor ALRUQI, Rehan KHAN, M. Nasir BASHIR and Jana PETRŮ. Multi-Objective Optimization of Process Parameters during Micro-Milling of Nickel-Based Alloy Inconel 718 Using Taguchi-Grey Relation Integrated Approach. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(23), p. nestránkováno. ISSN 1996-1944. [Detail]

ZAIDI, Sajid Raza, Najam UL QADIR, Syed Husain Imran JAFFERY, Muhammad Ali KHAN, Mushtaq KHAN and Jana PETRŮ. Statistical Analysis of Machining Parameters on Burr Formation, Surface Roughness and Energy Consumption during Milling of Aluminium Alloy Al 6061-T6. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(22), p. nestránkováno. ISSN 1996-1944. [Detail]

IRFAN, Muhammad, Irshad AHMAD, Shazia SHUKRULLAH, Humaira HUSSAIN, Muhammad ATIF, Stanislaw LEGUTKO, Jana PETRŮ, Michal HATALA, Muhammad Yasin NAZ and Saifur RAHMAN. Construction of 0D/2D Schottky Heterojunctions of ZnO and Ti3C2 Nanosheets with the Enriched Transfer of Interfacial Charges for Photocatalytic Hydrogen Evolution. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(13), p. nestránkováno. ISSN 1996-1944. [Detail]

SALEEM, Shahroz, Muhammad IRFAN, Muhammad Yasin NAZ, Shazia SHUKRULLAH, Muhammad Adnan MUNIR, Muhammad AYYAZ, Abdullah Saeed ALWADIE, Stanislaw LEGUTKO, Jana PETRŮ and Saifur RAHMAN. Investigating the Impact of Cu2+ Doping on the Morphological, Structural, Optical, and Electrical Properties of CoFe2O4 Nanoparticles for Use in Electrical Devices. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(10), p. nestránkováno. ISSN 1996-1944. [Detail]

ALI, Sadaqat, Muhammad IRFAN, Usama Muhammad NIAZI, Ahmad Majdi Abdul RANI, Ahmad RASHEDI, Saifur RAHMAN, Muhammad Kamal Asif KHAN, Mabkhoot A ALSAIARI, Stanislaw LEGUTKO, Jana PETRŮ and Antonín TREFIL. Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials. BASEL: MDPI Open Access Publishing, 2022, 15(8), p. nestránkováno. ISSN 1996-1944. [Detail]

LAPČÍK, Lubomír, Martin VAŠINA, Barbora LAPČÍKOVÁ and Yousef MURTAJA. Effect of Conditioning on PU Foam Matrix Materials Properties. Materials. Basilej: MDPI Open Access Publishing, 2022, 15(1), p. 1-10. ISSN 1996-1944. [Detail]

KUDRNA, Lukáš, Phu MA QUOC, Jiří HAJNYŠ, Jakub MĚSÍČEK, Radim HALAMA, František FOJTÍK and Lukáš HORŇÁČEK. Restoration and Possible Upgrade of a Historical Motorcycle Part Using Powder Bed Fusion. Materials. Basilej: MDPI Open Access Publishing, 2022, 15(4), p. nestránkováno. ISSN 1996-1944. [Detail]

RAJESH, P.V., K.K. GUPTA, Robert ČEP, M. RAMACHANDRAN, K. KOUŘIL and K. KALITA. Optimizing Friction Stir Welding of Dissimilar Grades of Aluminum Alloy Using WASPAS. Materials. Basilej: MDPI Open Access Publishing, 2022, 15(5), p. nestránkováno. ISSN 1996-1944. [Detail]

MOHYLA, Petr, Jiří HAJNYŠ, Lucie GEMBALOVÁ, Andrea ZAPLETALOVÁ and Pavel KRPEC. Influence of Heat Treatment of Steel AISI316L Produced by the Selective Laser Melting Method on the Properties of Welded Joint. Materials. Basilej: MDPI Open Access Publishing, 2022, 15(5), p. nestránkováno. ISSN 1996-1944. [Detail]

BRYTAN, Z., M. KRÓL, M. BENEDYK, W. PAKIEŁA, T. TAŃSKI, M.J. DAGNAW, P. SNOPIŃSKI, Marek PAGÁČ and A. CZECH. Microstructural and Mechanical Properties of Novel Co-Free Maraging Steel M789 Prepared by Additive Manufacturing. Materials. Basilej: MDPI Open Access Publishing, 2022, 15(5), p. nestránkováno. ISSN 1996-1944. [Detail]

IRFAN, M., S. SHUKRULLAH, M.Y. NAZ, I. AHMAD, B. SHOUKAT, S. LEGUTKO, Jana PETRŮ, S. RAHMAN and M.A. ALSAIARI. Si/SiO2/Al2O3 Supported Growth of CNT Forest for the Production of La/ZnO/CNT Photocatalyst for Hydrogen Production. Materials. Basilej: MDPI Open Access Publishing, 2022, 15(9), p. nestránkováno. ISSN 1996-1944. [Detail]

SNOPIŃSKI, Przemysław, Augustine Nana Sekeyi APPIAH, Ondřej HILŠER and Michal KOTOUL. Investigation of Microstructure and Mechanical Properties of SLM-Fabricated AlSi10Mg Alloy Post-Processed Using Equal Channel Angular Pressing (ECAP). Materials. MDPI Open Access Publishing, 2022, 15(22), p. 1-14. ISSN 1996-1944. [Detail]

CHOJNACKI, Jerzy, Jan KIELAR, Kukiełka LEON, Tomáš NAJSER, Aleksandra PACHUTA, Bogusława BERNER, Agnieszka ZDANOWICZ, Jaroslav FRANTÍK, Jan NAJSER and Václav PEER. Batch Pyrolysis and Co-Pyrolysis of Beet Pulp and Wheat Straw. Materials. MDPI Open Access Publishing, 2022, 15(3), p. nesránkováno. ISSN 1996-1944. [Detail]

ČECH BARABASZOVÁ, Karla, Aleš SLÍVA, Gabriela KRATOŠOVÁ, Sylva HOLEŠOVÁ, Anastasia VOLODARSKAJA, Tugrul CETINKAYA, Silvie BROŽOVÁ, Libor KOZUBEK and Gražyna SIMHA MARTYNKOVÁ. Phase Transformation after Heat Treatment of Cr-Ni Stainless Steel Powder for 3D Printing. Materials. MDPI Open Access Publishing, 2022, 15(15), p. nestránkováno. ISSN 1996-1944. [Detail]

MĚSÍČEK, Jakub, Tomáš ČEGAN, Phu MA QUOC, Radim HALAMA, Kateřina SKOTNICOVÁ, Jiří HAJNYŠ, Jan JUŘICA, Pavel KRPEC and Marek PAGÁČ. Effect of artificial aging on the strength, hardness, and residual stress of SLM AlSi10Mg parts prepared from the recycled powder. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing. Lausanne: Elsevier Science SA, 2022, 855(143900), p. nestránkováno. ISSN 0921-5093. [Detail]

ELAVARASAN, Krishnasamy, Tharmalingam GUNASEKAR, Lenka ČEPOVÁ and Robert ČEP. Study on a Strong and Weak n-Connected Total Perfect k-Dominating set in Fuzzy Graphs. Mathematics. BASEL: MDPI Open Access Publishing, 2022, 10(17), p. nestránkováno. ISSN 2227-7390. [Detail]

THILAGAVATHI, Rajamanickam, Jagadeesan VISWANATH, Lenka ČEPOVÁ and Vladimíra SCHINDLEROVÁ. Effect of Inflation and Permitted Three-Slot Payment on Two-Warehouse Inventory System with Stock-Dependent Demand and Partial Backlogging. Mathematics. BASEL: MDPI Open Access Publishing, 2022, 10(21), p. nestránkováno. ISSN 2227-7390. [Detail]

KALAIVANI, Nagarajan, Khaleel Fayaz Ur RAHMAN, Lenka ČEPOVÁ and Robert ČEP. On Grill S-beta-Open Set in Grill Topological Spaces. Mathematics. BASEL: MDPI Open Access Publishing, 2022, 10(23), p. nestránkováno. ISSN 2227-7390. [Detail]

HRABOVSKÝ, Leopold, Vieroslav MOLNÁR, Gabriel FEDORKO, Jozef TKÁČ and Karel FRYDRÝŠEK. Experimental Determination of Force Acting on a Sandwich Conveyor's Pressure Roller in Transport of Bulk Materials for the Needs of Failure Analysis. Measurement. Elsevier, 2022, 2022(22), p. nečíslováno. ISSN 0263-2241. [Detail]

GURÁŠ, Radek, Radek ŠTRAMBERSKÝ and Miroslav MAHDAL. The PID and 2DOF control of the integral system - influence of the 2DOF parameters and practical implementation. Measurement and Control. Londýn: SAGE Publications Ltd, 2022, 55(1-2), p. 94-101. ISSN 0020-2940. [Detail]

ZAPOMĚL, Jaroslav and Petr FERFECKI. A new concept of a hydrodynamic bearing lubricated by composite magnetic fluid for controlling the bearing load capacity. Mechanical Systems and Signal Processing. San Diego: Elsevier, 2022, 168(April), p. nestránkováno. ISSN 0888-3270. [Detail]

MONKA, Peter Pavol, Katarina MONKOVA, Martin VAŠINA, Milena KUBISOVA, Martin KOROL and Adriana SEKERAKOVA. Effect of Machining Conditions on Temperature and Vickers Microhardness of Chips during Planing. Metals. MDPI Open Access Publishing, 2022, 12(10), p. 1-18. ISSN 2075-4701. [Detail]

KRBATA, Michal, Jozef MAJERIK, Igor BARENYI, Maros ECKERT, Robert ČEP, Josef SEDLAK and Ivan SAMARDZIC. EXPERIMENTAL DETERMINATION OF CONTINUOUS COOLING TRANSFORMATION DIAGRAM FOR HIGH STRENGTH STEEL X155CrMoV12. Metalurgija. Záhřeb: Hrvatsko metalurško društvo (HMD), 2022, 61(1), p. 185-188. ISSN 0543-5846. [Detail]

KRBATA, Michal, Jozef MAJERIK, Igor BARENYI, Maros ECKERT, Robert ČEP, Josef SEDLAK and Ivan SAMARDZIC. DILATOMETRIC ANALYSIS OF COOLING CURVES FOR HIGH STRENGTH STEEL X155CrMoV12. Metalurgija. Záhřeb: Hrvatsko metalurško društvo (HMD), 2022, 61(1), p. 193-196. ISSN 0543-5846. [Detail]

IRFAN, Muhammad, Humaira HUSSAIN, Bisma SALEEM, Muhammad SALEEM, Shazia SHUKRULLAH, Stanislaw LEGUTKO, Jana PETRŮ, Muhammad Yasin NAZ, Marek PAGÁČ, Saifur RAHMAN and Rehan KHAN. Evaluation of Ultrasonically ZnO Loading Effect on Photocatalytic Self-Cleaning, UV Protection and Antibacterial Activity of Plasma/Citric Acid-Activated Cotton Fabric. Nanomaterials. BASEL: MDPI Open Access Publishing, 2022, 12(12), p. nestránkováno. ISSN 2079-4991. [Detail]

SZURGACZ, Dawid, Konrad TRZOP, Jan GIL, Sergey ZHIRONKIN, Jiří POKORNÝ and Horst GONDEK. Numerical Study for Determining the Strength Limits of a Powered Longwall Support. PROCESSES. BASEL: MDPI, 2022, 10(3), p. 1 - 17. ISSN 2227-9717. [Detail]

SEWAGEGN, Abate Getaw. Optimization of Toll Services Using Queuing Theory in the Case of Ethiopia. Perners Contact. Univerzita Pardubice, 2022, 17(2), p. 1-13. ISSN 1801-674X. [Detail]

MONKOVA, Katarina, Martin VAŠINA, Peter Pavol MONKA, Jan VANCA and Drazan KOZAK. Effect of 3D-Printed PLA Structure on Sound Reflection Properties. Polymers. BASEL: MDPI Open Access Publishing, 2022, 14(3), p. nestránkováno. ISSN 2073-4360. [Detail]

ZARYBNICKA, Lucie, Jana PETRŮ, Pavel KRPEC and Marek PAGÁČ. Effect of Additives and Print Orientation on the Properties of Laser Sintering-Printed Polyamide 12 Components. Polymers. BASEL: MDPI Open Access Publishing, 2022, 14(6), p. nestránkováno. ISSN 2073-4360. [Detail]

RAJESH, Durvasulu, Nagarajan LENIN, Robert ČEP, Palanivel ANAND and Muniyandy ELANGOVAN. Experimental Investigation of Bi-Directional Flax with Ramie Fibre-Reinforced Phenol-Formaldehyde Hybrid Composites. Polymers. BASEL: MDPI Open Access Publishing, 2022, 14(22), p. nestránkováno. ISSN 2073-4360. [Detail]

GNATOWSKI, Adam, Rafal GOLEBSKI, Jana PETRŮ and Marek PAGÁČ. Analysis of Thermomechanical Properties and the Influence of Machining Process on the Surface Structure of Composites Manufactured from Metal Chips with a Polymer Matrix. Polymers. BASEL: MDPI Open Access Publishing, 2022, 14(17), p. nestránkováno. ISSN 2073-4360. [Detail]

SCHWARZ, David, Marek PAGÁČ, Josef PETRUŠ and Stanislav POLZER. Effect of Water-Induced and Physical Aging on Mechanical Properties of 3D Printed Elastomeric Polyurethane. Polymers. BASEL: MDPI Open Access Publishing, 2022, 14(24), p. nestránkováno. ISSN 2073-4360. [Detail]

REGUCKI, P., R. KRZYŻYŃSKA and Zbyszek SZELIGA. Mathematical model for a single screw ash cooler of a circulating fluidized bed boiler. Powder technology. San Diego: Elsevier, 2022, 396(Volume 396), p. 50-58. ISSN 0032-5910. [Detail]

POLZER, Ales, Katerina MOURALOVA, Libor BENES, Radim ZAHRADNICEK and Jiří FRIES. Comparison of machinability of nickel alloys using WEDM. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Londýn: SAGE Publications Ltd, 2022, 2022(1), p. nestránkováno. ISSN 0954-4054. [Detail]

MOURALOVA, Katerina, Libor BENES, Tomas PROKES, Josef BEDNAR, Radim ZAHRADNICEK and Jiří FRIES. Analysis of the effect of material thickness during the WEDM processon cutting speed, topography and morphology. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Londýn: SAGE Publications Ltd, 2022, 2022-12-08(2022-12-08), p. nestránkováno. ISSN 0954-4054. [Detail]

MOURALOVA, Katerina, Stefan MICHNA, Radim ZAHRADNICEK, Josef BEDNAR, Tomas PLICHTA and Jiří FRIES. Experimental analysis of microhardness changes of subsurface areas affected by WEDM. Proceedings of the Institution of Mechanical Engineers. Part E: Journal of Process Mechanical Engineering. Londýn: SAGE Publications Ltd, 2022, 2022(1), p. nestránkováno. ISSN 0954-4089. [Detail]

PRIYADARSHINI, Jayaraju, Muniyandy ELANGOVAN, Miroslav MAHDAL and Murugan JAYASUDHA. Machine-Learning-Assisted Prediction of Maximum Metal Recovery from Spent Zinc-Manganese Batteries. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(5), p. 1-14. ISSN 2227-9717. [Detail]

RAJENDRAN, Shankar, Narayanan GANESH, Robert ČEP, Rama Chadran NARAYANAN, Subham PAL and Kanak KALITA. A Conceptual Comparison of Six Nature-Inspired Metaheuristic Algorithms in Process Optimization. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(2), p. nestránkováno. ISSN 2227-9717. [Detail]

SHANKAR, Rajendran, Narayanan GANESH, Robert ČEP, Rama Chandran NARAYANAN, Subham PAL and Kanak KALITA. Hybridized Particle Swarm-Gravitational Search Algorithm for Process Optimization. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(3), p. nestránkováno. ISSN 2227-9717. [Detail]

SHANMUGASUNDAR, Govindasamy, Gaurav SAPKOTA, Robert ČEP and Kanak KALITA. Application of MEREC in Multi-Criteria Selection of Optimal Spray-Painting Robot. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(6), p. nestránkováno. ISSN 2227-9717. [Detail]

SHANMUGASUNDAR, Gunasekaran, Vishal FEGADE, Miroslav MAHDAL and Kanak KALITA. Optimization of Variable Stiffness Joint in Robot Manipulator Using a Novel NSWOA-MARCOS Approach. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(6), p. nestránkováno. ISSN 2227-9717. [Detail]

JAYASUDHA, Murugan, Muniyandy ELANGOVAN, Miroslav MAHDAL and Jayaraju PRIYADARSHINI. Accurate Estimation of Tensile Strength of 3D Printed Parts Using Machine Learning Algorithms. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(6), p. nestránkováno. ISSN 2227-9717. [Detail]

GAYATHRI, Rajakumaran, Shola Usha RANI, Lenka ČEPOVÁ, Murugesan RAJESH and Kanak KALITA. A Comparative Analysis of Machine Learning Models in Prediction of Mortar Compressive Strength. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(7), p. nestránkováno. ISSN 2227-9717. [Detail]

RENISH, R. Rohith, Amala Justus SELVAM, Robert ČEP and Muniyandy ELANGOVAN. Influence of Varying Compression Ratio of a Compression Ignition Engine Fueled with B20 Blends of Sea Mango Biodiesel. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(7), p. nestránkováno. ISSN 2227-9717. [Detail]

MOHAMED, Gori, James VISUMATHI, Miroslav MAHDAL, Jose ANAND and Muniyandy ELANGOVAN. An Effective and Secure Mechanism for Phishing Attacks Using a Machine Learning Approach. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(7), p. nestránkováno. ISSN 2227-9717. [Detail]

RENISH, R. Rohith, Amala Justus SELVAM, Robert ČEP and Muniyandy ELANGOVAN. Performance, Emission and Combustion Characteristics of a VCR Engine Fueled with Sea Mango Biodiesel/Diesel Blends. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(8), p. nestránkováno. ISSN 2227-9717. [Detail]

SHANMUGASUNDAR, Govindasamy, Tapan Kumar MAHANTA, Robert ČEP and Kanak KALITA. Novel Fuzzy Measurement Alternatives and Ranking according to the Compromise Solution-Based Green Machining Optimization. Processes. BASEL: MDPI Open Access Publishing, 2022, 10(12), p. nestránkováno. ISSN 2227-9717. [Detail]

STANCIN, Hrvoje, Michal ŠAFÁŘ, Jana RŮŽIČKOVÁ, Hrvoje MIKULCIC, Helena RACLAVSKÁ, X WANG and Duič NEVEN. Influence of plastic content on synergistic effect and bio-oil quality from the co-pyrolysis of waste rigid polyurethane foam and sawdust mixture. Renewable Energy. Pergamon - Elsevier Science, Ltd., 2022, 196(14.06.2022), p. 1218-1228. ISSN 0960-1481. [Detail]

MOURALOVA, Katerina, Josef BEDNAR, Libor BENES, Tomas PLICHTA, Tomas PROKES and Jiří FRIES. Production of precision slots in copper foil using micro EDM. Scientific Reports. New York: Nature Publishing Group, 2022, 12(1), p. nestránkováno. ISSN 2045-2322. [Detail]

SUGANTHI, Sundararaj, Nagappan UMAPATHI, Miroslav MAHDAL and Manickam RAMACHANDRAN. Multi Swarm Optimization Based Clustering with Tabu Search in Wireless Sensor Network. Sensors. BASEL: MDPI Open Access Publishing, 2022, 22(5), p. nestránkováno. ISSN 1424-3210. [Detail]

HECZKO, Dominik, Petr OŠČÁDAL, Tomáš KOT, Adam BOLESLAVSKÝ, Václav KRYS, Jan BÉM, Ivan VIRGALA and Zdenko BOBOVSKÝ. Finding the Optimal Pose of 2D LLT Sensors to Improve Object Pose Estimation. Sensors. BASEL: MDPI Open Access Publishing, 2022, 22(4), p. nestránkováno. ISSN 1424-3210. [Detail]

DHANABALAN, Gnanasekaran, Sankar Tamil SELVI and Miroslav MAHDAL. Scan Time Reduction of PLCs by Dedicated Parallel-Execution Multiple PID Controllers Using an FPGA. Sensors. BASEL: MDPI Open Access Publishing, 2022, 22(12), p. nestránkováno. ISSN 1424-3210. [Detail]

WAGNEROVÁ, Renata, Martin JUREK, Jiří CZEBE and Jan GEBAUER. A Method for Measuring the Quality of Graphic Transfer to Materials with Variable Dimensions (Wood). Sensors. BASEL: MDPI Open Access Publishing, 2022, 22(16), p. nestránkováno. ISSN 1424-3210. [Detail]

MAZUR, Tomasz, Lenka ČEPOVÁ, Tomasz SZYMANSKI and Miroslaw RUCKI. Analysis of the Planar Point Identification Accuracy in CMM Measurements. Sensors. BASEL: MDPI Open Access Publishing, 2022, 22(18), p. nestránkováno. ISSN 1424-3210. [Detail]

GEBAUER, Jan, Pavel ŠOFER, Martin JUREK, Renata WAGNEROVÁ and Jiří CZEBE. Machine Vision-Based Fatigue Crack Propagation System. Sensors. BASEL: MDPI Open Access Publishing, 2022, 22(18), p. nestránkováno. ISSN 1424-3210. [Detail]

SARKAN, Branislav, Michal LOMAN, Frantisek SYNAK, Michal RICHTÁŘ and Miroslaw GIDLEWSKI. Influence of Engine Electronic Management Fault Simulation on Vehicle Operation. Sensors. BASEL: MDPI Open Access Publishing, 2022, 22(5), p. nestránkováno. ISSN 1424-3210. [Detail]

OŠČÁDAL, Petr, Tomáš SPURNÝ, Tomáš KOT, Stefan GRUSHKO, Jiří SUDER, Dominik HECZKO, Petr NOVÁK and Zdenko BOBOVSKÝ. Distributed Camera Subsystem for Obstacle Detection. Sensors. MDPI Open Access Publishing, 2022, 22(12), p. 1-18. ISSN 1424-3210. [Detail]

PREMKUMAR, Ramesh, Miroslav MAHDAL and Muniyandy ELANGOVAN. An Efficient Chaos-Based Image Encryption Technique Using Bitplane Decay and Genetic Operators. Sensors. MDPI Open Access Publishing, 2022, 22(20), p. 1-23. ISSN 1424-3210. [Detail]

JAYALAKSHMI, S., N. GANESH, Robert ČEP and J.S. MURUGAN. Movie Recommender Systems: Concepts, Methods, Challenges, and Future Directions. Sensors. MDPI Open Access Publishing, 2022, 22(13), p. nestránkováno. ISSN 1424-3210. [Detail]

ŠEDĚNKA, David, Jan BLATA, František HELEBRANT and Ladislav HRABEC. APLIKACE METOD TECHNICKÉ DIAGNOSTIKY DO PROVOZU PLUNŽROVÝCH ČERPADEL PRO ZAJIŠTĚNÍ BEZPORUCHOVÉHO PROVOZU. Spravodaj ATD SR. Asociácia technických diagnostikov SR, 2022, 2022(2), p. 1-6. ISSN 1337-8252. [Detail]

VÝTISK, Jan, Stanislav HONUS, Vladimír KOČÍ, Marek PAGÁČ, Jiří HAJNYŠ, Mojmír VRTEK and Milan VUJANOVIC. Comparative study by life cycle assessment of an air ejector and orifice plate for experimental measuring stand manufactured by conventional manufacturing and additive manufacturing. Sustainable Materials and Technologies. Elsevier B.V., 2022, 32, p. July 2022. ISSN 2214-9937. [Detail]

SNOPIŃSKI, Przemysław, Anna WOZNIAK, Dariusz LUKOWIEC, Krzysztof MATUS, Tomasz TAŃSKI, Stanislav RUSZ and Ondřej HILŠER. Evolution of Microstructure, Texture and Corrosion Properties of Additively Manufactured AlSi10Mg Alloy Subjected to Equal Channel Angular Pressing (ECAP). Symmetry. MDPI Open Access Publishing, 2022, 14(4), p. 1-19. ISSN 2073-8994. [Detail]

GEBAUER, Marek, Tomáš BLEJCHAŘ, Tomáš BRZOBOHATÝ, Tomáš KARÁSEK and Miroslav NEVŘELA. Determination of Aerodynamic Losses of Electric Motors. Symmetry. MDPI Open Access Publishing, 2022, 14(11), p. nestránkováno. ISSN 2073-8994. [Detail]

BUČKO, Michal, Vladimíra SCHINDLEROVÁ and Hana KRUPOVÁ. Application of Lean Manufacturing Methods in the Production of Ultrasonic Sensor. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2022, 29(5), p. 1671-1677. ISSN 1330-3651. [Detail]

HRABOVSKÝ, Leopold, Tomáš MLČÁK and Václav ŽÁČEK. Applied forces in the handling unit fixation mechanism. Tehnički vjesnik – Technical Gazette. University of Osijek, 2022, 29(2), p. 620-627. ISSN 1330-3651. [Detail]

JADLOVEC, Marek, Jan VÝTISK, Jakub ČESPIVA, Stanislav HONUS and Tadeáš OCHODEK. DISPOSAL OF PYROLYSIS RESIDUE BY INCINERATION. WIT Transactions on Ecology and the Environment. WIT Press, 2022, 260(December), p. 273-280. ISSN 1743-3541. [Detail]

ČESPIVA, Jakub, Jan SKŘÍNSKÝ, Ján VEREŠ, Marek JADLOVEC, Jan VÝTISK, Tadeáš OCHODEK and Stanislav HONUS. Evaluation and safety assessment of biomass-/waste-generated producer gas. WIT Transactions on Ecology and the Environment. WIT Press, 2022, 260(December), p. 281-288. ISSN 1743-3541. [Detail]

SZELIGA, Zbyszek, Stanislav HONUS, Zuzana VÁVROVÁ, P. JIRSA, V VESELY, Milan ČÁRSKÝ, M. VUJANOVIC, P. REGUCKI and R. KRZYZYNSKA. Effect of HCl on a sorption of mercury from flue gas evolved during incineration of hospital waste using entrained flow adsorbers. Waste Management. Oxford: PERGAMON-ELSEVIER SCIENCE LTD, 2022, 140(Volume 140), p. 74-80. ISSN 0956-053X. [Detail]

HIRMAN, David, Petr KUNZ and Vladimír HERŠKOVIČ. Ekologizovaný pásový dopravník E1 na Dolech Bílina. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2022, 1(3/12), p. 20-25. ISSN 1213-1660. [Detail]

KOŠČÁK, Peter, Leopold HRABOVSKÝ and Lucia MELNIKOVÁ. LIBERALIZATION OF THE OPERATION OF EUROPEAN AIRPORTS. Acta Avionica. Technická univerzita v Košiciach, 2021, XXIII, 44(1), p. 1-9. ISSN 1335-9479. [Detail]

HRABOVSKÝ, Leopold. Validation Device for the Stiffness of Cylindrical Coiled Pressure Springs. Acta Mechanica Slovaca. Technická univerzita Košice, 2021, 24(2020)(2), p. 42-48. ISSN 1335-2393. [Detail]

KWIATOŃ, P., D. CEKUS, Michal ŠOFER and Pavel ŠOFER. Modeling droplet impact on solids obstacle of various shapes. Acta Physica Polonica A. Zabrze: Polish Academy of Sciences, 2021, 139(5), p. 506-509. ISSN 0587-4246. [Detail]

KWIATON, Pawel, Dawid CEKUS, Michal ŠOFER and Pavel ŠOFER. Modeling Droplet Impact on Solids Obstacle of Various Shapes. Acta Physica Polonica A. Zabrze: Polish Academy of Sciences, 2021, 139(5), p. 506-509. ISSN 0587-4246. [Detail]

HRABOVSKÝ, Leopold, Ivan MAŠLONKA, Tomáš KUBÍN and Martin MANTIČ. A Centering Technique for Cast-Iron Moulds in Horizontal Centrifugal Casting. Advances in Science and Technology Research Journal. Lublin University of Technology, 2021, 15(1), p. 10-17. ISSN 2080-4075. [Detail]

ŠAJDLEROVÁ, Ivana, Vladimíra SCHINDLEROVÁ and Jiří KRATOCHVÍL. POTENTIAL AND LIMITS OF OEE IN THE TOTAL PRODUCTIVITY MANAGEMENT. Advances in Science and Technology Research Journal. Lublin University of Technology, 2021, 14(2), p. 19-26. ISSN 2080-4075. [Detail]

ŠPROCH, Filip and Jan NEVIMA. Increasing Competitiveness Through Innovation in an Industrial Enterprise - A Case Study of the Company Massag. Advances in science and technology-research journal. Lublin University of Technology, 2021, 15(1), p. 110-125. ISSN 2299-8624. [Detail]

HRABOVSKÝ, Leopold and Roman HRBÁČ. Laboratory device detecting the magnitude of the static friction coefficient of brake lining. Advances in science and technology-research journal. Lublin University of Technology, 2021, 15(2), p. 191-197. ISSN 2299-8624. [Detail]

KRČEK, Jiří. Bie Model of Periodic Diffraction Problems in Optics. Applications of Mathematics. Matematický ústav AV ČR, 2021, 67(1), p. 81-92. ISSN 0862-7940. [Detail]

ŠOFER, Michal, Pavel ŠOFER, Petr FERFECKI, Michal MOLČAN and Jakub STRYJA. Lamb Wave Mode Scattering Analysis on Adhesively Bonded Single Lap Joint using Modal Decomposition Method. Applied Mathematical Modelling. Elsevier, 2021, 89(08-2020), p. 413-427. ISSN 0307-904X. [Detail]

HUCZALA, Daniel, Tomáš KOT, Martin PFURNER, Dominik HECZKO, Petr OŠČÁDAL and Vladimír MOSTÝN. Initial Estimation of Kinematic Structure of a Robotic Manipulator as an Input for Its Synthesis. Applied Sciences. BASEL: MDPI Open Access Publishing, 2021, 11(8), p. 1-19. ISSN 2076-3417. [Detail]

ONDOCKO, Stefan, Jozef SVETLIK, Michal SASALA, Zdenko BOBOVSKÝ, Tomas STEJSKAL, Jozef DOBRANSKY, Peter DEMEC and Lukas HRIVNIAK. Inverse Kinematics Data Adaptation to Non-Standard Modular Robotic Arm Consisting of Unique Rotational Modules. Applied Sciences. BASEL: MDPI Open Access Publishing, 2021, 11(3), p. nestránkováno. ISSN 2076-3417. [Detail]

STRAKOVÁ, Erika, Dalibor LUKÁŠ, Zdenko BOBOVSKÝ, Tomáš KOT, Milan MIHOLA and Petr NOVÁK. Matching Point Clouds with STL Models by Using the Principle Component Analysis and a Decomposition into Geometric Primitives. Applied Sciences. BASEL: MDPI Open Access Publishing, 2021, 11(5), p. nestránkováno. ISSN 2076-3417. [Detail]

PASTOR, Robert, Zdenko BOBOVSKÝ, Stefan GRUSHKO and Daniel HUCZALA. Genetic Optimization of a Manipulator: Comparison between Straight, Rounded, and Curved Mechanism Links. Applied Sciences. BASEL: MDPI Open Access Publishing, 2021, 11(6), p. nestránkováno. ISSN 2076-3417. [Detail]

RACLAVSKÁ, Helena, Pavel KANTOR, Jana RŮŽIČKOVÁ, Marek KUCBEL, Barbora ŠVÉDOVÁ, Karolina SLAMOVÁ, Šárka FLODROVÁ and Dagmar JUCHELKOVÁ. An Influence of the Fuel Type on Element Behaviour in Domestic Boilers with Respect to the Circular Economy. Applied Sciences. BASEL: MDPI Open Access Publishing, 2021, 11(11), p. nestránkováno. ISSN 2076-3417. [Detail]

FRYDRÝŠEK, Karel, Sarka MICHENKOVA, Leopold PLEVA, Jan KOUTECKY, Jiří FRIES, Kateřina PETEREK DĚDKOVÁ, Roman MADEJA, Antonín TREFIL, Pavel KRPEC, Tomáš HALO, Leopold HRABOVSKÝ, Lubor BIALY, Roland JANCO and Jiří POKORNÝ. Mechanics of Screw Joints Solved as Beams Placed in a Tangential Elastic Foundation. Applied Sciences. BASEL: MDPI Open Access Publishing, 2021, 11(12), p. nestránkováno. ISSN 2076-3417. [Detail]

SINČÁK, Peter Ján, Ivan VIRGALA, Michal KELEMEN, Erik PRADA, Zdenko BOBOVSKÝ and Tomáš KOT. Chimney Sweeping Robot Based on a Pneumatic Actuator. Applied Sciences. BASEL: MDPI Open Access Publishing, 2021, 11(11), p. nestránkováno. ISSN 2076-3417. [Detail]

PAGÁČ, Marek, Jiří HAJNYŠ, Radim HALAMA, Tariq Abdulaziz A ALDABASH, Jakub MĚSÍČEK, Lukáš JANČAR and Jan JANSA. Prediction of model distortion by fem in 3d printing via the selective laser melting of stainless steel aisi 316l. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(4), p. 1-16. ISSN 2076-3417. [Detail]

KUBOŇOVÁ, Lenka, Iva JANÁKOVÁ, Petra MALÍKOVÁ, Silvie DRABINOVÁ, Milan DEJ, Roman SMELIK, Pavel SKALNÝ and Silvie HEVIÁNKOVÁ. Evaluation of waste blends with sewage sludge as a potential material input for pyrolysis. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(4), p. 1-17. ISSN 2076-3417. [Detail]

KOT, Tomáš, Zdenko BOBOVSKÝ, Mathias BRANDSTÖTTER, Václav KRYS, Ivan VIRGALA and Petr NOVÁK. Finding optimal manipulator arm shapes to avoid collisions in a static environment. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(1), p. 1-23. ISSN 2076-3417. [Detail]

MĚSÍČEK, Jakub, Phu MA QUOC, Jiří HAJNYŠ, Jan ZELINKA, Marek PAGÁČ, Jana PETRŮ and Ondřej MIZERA. Abrasive surface finishing on slm 316l parts fabricated with recycled powder. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(6), p. nestránkováno. ISSN 2076-3417. [Detail]

KOT, Tomáš, Zdenko BOBOVSKÝ, Aleš VYSOCKÝ, Václav KRYS, Jakub ŠAFAŘÍK and Roman RUŽAROVSKÝ. Method for robot manipulator joint wear reduction by finding the optimal robot placement in a robotic cell. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(12), p. nestránkováno. ISSN 2076-3417. [Detail]

SIKORA, Jan, Renata WAGNEROVÁ, Lenka LANDRYOVÁ, Jan ŠÍMA and Stanislaw WRONA. Influence of environmental noise on quality control of HVAC devices based on convolutional neural network. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(16), p. nestránkováno. ISSN 2076-3417. [Detail]

ŠOFER, Pavel, Michal ŠOFER, M. RAČEK, D. CEKUS and P. KWIATOŃ. Partial energy transfer model of lamb waves scattering in materially isotropic waveguides. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(10), p. nestránkováno. ISSN 2076-3417. [Detail]

VOCETKA, Michal, Zdenko BOBOVSKÝ, Ján BABJAK, Jiří SUDER, Stefan GRUSHKO, Jakub MLOTEK, Václav KRYS and M. HAGARA. Influence of drift on robot repeatability and its compensation. Applied Sciences. Basilej: MDPI Open Access Publishing, 2021, 11(22), p. nestránkováno. ISSN 2076-3417. [Detail]

SUDER, Jiří, Zdenko BOBOVSKÝ, Jakub MLOTEK, Michal VOCETKA, Petr OŠČÁDAL and Zdeněk ZEMAN. Structural Optimization Method of a FinRay Finger for the Best Wrapping of Object. Applied Sciences. MDPI Open Access Publishing, 2021, 9(11), p. 1-18. ISSN 2076-3417. [Detail]

DJURDEV, Mica, Robert ČEP, Dejan LUKIC, Aco ANTIC, Branislav POPOVIC and Mijodrag MILOSEVIC. A Genetic Crow Search Algorithm for Optimization of Operation Sequencing in Process Planning. Applied Sciences. MDPI Open Access Publishing, 2021, 11(5), p. 1-22. ISSN 2076-3417. [Detail]

ROJÍČEK, Jaroslav, Zbyněk PAŠKA, Martin FUSEK, Zdenko BOBOVSKÝ, Alžbeta SAPIETOVÁ, Vladimír MOSTÝN and Dagmar LIČKOVÁ. Optimization of a Truss Structure Used to Design of the Manipulator Arm from a Set of Components. Applied Sciences. MDPI Open Access Publishing, 2021, 11(21), p. 1-28. ISSN 2076-3417. [Detail]

RUSZ, Stanislav, Jablonska MAGDALENA, Kowalczyk KAROLINA, Tkocz MAREK, Bulzak TOMASZ and Bednarczyk IWONA. Dual rolls equal channel extrusion as unconventional SPD process of the ultralow carbon steel: fnite element simulation, experimental investigations and microstructural analysis. Archives of Civil and Mechanical Engineering. Springer, 2021, p. 1-11. ISSN 1644-9665. [Detail]

SNOPIŃSKI, P., M. KRÓL, Marek PAGÁČ, Jana PETRŮ, Jiří HAJNYŠ, T. MIKUSZEWSKI and T. TAŃSKI. Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys. Archives of Civil and Mechanical Engineering. Vídeň: Springer, 2021, 21(3), p. nestránkováno. ISSN 1644-9665. [Detail]

TURCANOVA, Michaela, Martin HRTON, Petr DVORAK, Kamil NOVAK, Marketa HERMANOVA, Zdenek BEDNARIK, Stanislav POLZER and Jiri BURSA. Full-Range Optical Imaging of Planar Collagen Fiber Orientation Using Polarized Light Microscopy. Biomed Research International. Londýn: Hindawi, 2021, 2021, p. nestránkováno. ISSN 2314-6133. [Detail]

ZAPOMĚL, Jaroslav and Petr FERFECKI. Vibration control of rotors mounted in hydrodynamic bearings lubricated with magnetically sensitive oil by changing their load capacity. Bulletin of the Polish Academy of Sciences: Technical Sciences. Varšava: Polska akademia nauk (PAN), 2021, 69(6), p. nestránkováno. ISSN 0239-7528. [Detail]

SHIVAKOTI, I., G. KIBRIA, Robert ČEP, B.B. PRADHAN and A. SHARMA. Laser surface texturing for biomedical applications: A review. Coatings. Basilej: MDPI Open Access Publishing, 2021, 11(2), p. 1-15. ISSN 2079-6412. [Detail]

POLZER, Stanislav, Jan KRACÍK, Tomas NOVOTNY, Lubos KUBICEK, Robert STAFFA and Madhavan L RAGHAVAN. Methodology for Estimation of Annual Risk of Rupture for Abdominal Aortic Aneurysm. Computer Methods and Programs in Biomedicine. Shannon: Elsevier, 2021, 200(1), p. nestránkováno. ISSN 0169-2607. [Detail]

NAKONIECZNY, Damian Stanislaw, Aleš SLÍVA, Zbigniew PASZENDA, Marianna HUNDÁKOVÁ, Gabriela KRATOŠOVÁ, Sylva HOLEŠOVÁ, Justyna MAJEWSKA, Piotr KAŁUŻYŃSKI, Sajjan Kumar SATHISH and Gražyna SIMHA MARTYNKOVÁ. Simple Approach to Medical Grade Alumina and Zirconia Ceramics Surface Alteration via Acid Etching Treatment. Crystals. MDPI Open Access Publishing, 2021, 11(10), p. 1232. ISSN 2073-4352. [Detail]

KOTŮLEK, Jan. Pražská německá matematická komunita mezi dvěma světovými válkami. Dějiny věd a techniky. (History of Sciences and Technology). Společnost pro dějiny věd a techniky při RVS, 2021, 54(1), p. 8–35. ISSN 0300-4414. [Detail]

FAMFULÍK, Jan, Michal RICHTÁŘ, Jakub ŠMIRAUS, Petra MÜCKOVÁ, Branislav ŠARKAN and Pavel DRESLER. Internal combustion engine diagnostics using statistically processed Wiebe function. Eksploatacja i Niezawodnosc - Maintenance and Reliability. Lublin: Polish Maintanace Society, 2021, 23(3), p. 505-511. ISSN 1507-2711. [Detail]

HRABOVSKÝ, Leopold and Jiří FRIES. Transport Performance of a Steeply Situated Belt Conveyor. Energies. MDPI Open Access Publishing, 2021, 14(23), p. 1-15. ISSN 1996-1073. [Detail]

JURIĆ, Filip, Marija STIPIĆ, Niko SAMEC, Matjaž HRIBERŠEK, Stanislav HONUS and Milan VUJANOVIĆ. Numerical investigation of multiphase reactive processes using flamelet generated manifold approach and extended coherent flame combustion model. Energy Conversion and Management. PERGAMON-ELSEVIER SCIENCE LTD, 2021, 240(_), p. 1-12. ISSN 0196-8904. [Detail]

JUREK, Martin and Renata WAGNEROVÁ. Laser beam calibration for wood surface colour treatment. European Journal of Wood and Wood Products. Vídeň: Springer, 2021, 79(5), p. 1097–1107. ISSN 0018-3768. [Detail]

PILAŘ, Lukáš, Karel BOROVEC, Zbyszek SZELIGA and J. GÓRECKI. Mercury emission from three lignite-fired power plants in the Czech Republic. Fuel Processing Technology. San Diego: Elsevier, 2021, 212(212), p. nestránkováno. ISSN 0378-3820. [Detail]

HRABOVSKÝ, Leopold and Peter MICHALIK. Friction coefficient of load-bearing elements of building technical facilities. IOP Conference Series: Materials Science and Engineering. Volume 1039. IOP Publishing, 2021, 1203(1), p. 1-9. ISSN 1757-8981. [Detail]

HRABOVSKÝ, Leopold, Martin MANTIČ, Gustav KOTAJNÝ and Václav ŽÁČEK. Mechanical Friction Retainers Used for Braking and Locking Pallets in Place. IOP Conference Series: Materials Science and Engineering. Volume 1178. IOP Publishing, 2021, 1190(1), p. 1-10. ISSN 1757-8981. [Detail]

HRABOVSKÝ, Leopold. Loose material filling in the loading trough profile of the belt conveyor. IOP Conference Series: Materials Science and Engineering. Volume 1178. IOP Publishing, 2021, 1190(1), p. 1-10. ISSN 1757-8981. [Detail]

HRABOVSKÝ, Leopold and Václav ŽÁČEK. Forces in the lock-off device during the rolling of the brake pulley roller over the brake ramp in the built automatic parking house. IOP Conference Series: Materials Science and Engineering. Volume 960. IOP Publishing, 2021, 960(2), p. 1-10. ISSN 1757-8981. [Detail]

WITTEK, Adam, Farah ALKHATIB, Radek VITÁSEK, Stanislav POLZER and Karol MILLER. On stress in abdominal aortic aneurysm: Linear versus non-linear analysis and aneurysms rupture risk. International Journal for Numerical Methods in Biomedical Engineering. Wiley, 2021, p. nestránkováno. ISSN 2040-7939. [Detail]

NOSKIEVIČ, Petr and Melvin Alexis Lara DE LEON. Control of the Test Rig for Spring Stiffness Measurement with Hydraulic Integrated Actuator and Computer Vision. International Journal of Fluid Power. Gistrup: River Publishers, 2021, 21(3), p. 305-325. ISSN 1439-9776. [Detail]

NOSKIEVIČ, Petr and Melvin Alexis LARA DE LEON. Control of the test rig for spring stiffness measurement with hydraulic integrated actuator and computer vision. International Journal of Fluid Power. Gistrup: River Publishers, 2021, 21(3), p. 305-326. ISSN 1439-9776. [Detail]

FOJTÍK, František and JAN PAPUGA. Issues encountered in the application of multiaxial fatigue strength methods to experiments with various stress distributions. International journal of fatigue. San Diego: Elsevier, 2021, 149(149), p. nestránkováno1-18. ISSN 0142-1123. [Detail]

FOJTÍK, David, Jiří TŮMA and Petr FARUZEL. Computer modelling of burden distribution in the blast furnace equipped by a bell-less top charging system. Ironmaking & Steelmaking. Oslo: Taylor & Francis, 2021, 48(9), p. nestránkováno. ISSN 0301-9233. [Detail]

FOJTÍK, David, Jiří TŮMA and P. FARUZEL. Computer modelling of burden distribution in the blast furnace equipped by a bell-less top charging system. Ironmaking & Steelmaking. Philadelphia: Taylor & Francis, 2021, 48(9), p. nestránkováno. ISSN 0301-9233. [Detail]

SIGAEVA, Taisiya, Samaneh SATTARI, Stanislav POLZER, Jehangir J APPOO and Elena S DI MARTINO. Biomechanical properties of ascending aortic aneurysms: Quantification of inter- and intra-patient variability. Journal of Biomechanics. San Diego: Elsevier, 2021, 125(srpen), p. nestránkováno. ISSN 0021-9290. [Detail]

ŠOFER, Michal. Resonance phenomena of lamb waves scattering by a horizontal crack of finite length. Journal of Sound and Vibration. San Diego: Elsevier, 2021, 490(January), p. nestránkováno. ISSN 0022-460X. [Detail]

VITÁSEK, Radek, Didier GOSSIHO and Stanislav POLZER. Sources of inconsistency in mean mechanical response of abdominal aortic aneurysm tissue. Journal of the Mechanical Behavior of Biomedical Materials. Amsterdam: Elsevier Science, 2021, 115(březen), p. nestránkováno. ISSN 1751-6161. [Detail]

POLZER, Stanislav, Vojtech MAN, Robert VLACHOVSKY, Lubos KUBICEK, Jan KRACÍK, Robert STAFFA, Tomas NOVOTNY, Jiri BURSA and M. L RAGHAVAN. Failure properties of abdominal aortic aneurysm tissue are orientation dependent. Journal of the Mechanical Behavior of Biomedical Materials. New York: Elsevier Science, 2021, 114(únor 2021), p. nestránkováno. ISSN 1751-6161. [Detail]

POLÁŠEK, Zdenek, Richardos Nikolaos SALEK, Martin VAŠINA, Aneta LYČKOVÁ, Robert GÁL, Vendula PACHLOVÁ and František BUŇKA. The effect of furcellaran or κ-carrageenan addition on the textural, rheological and mechanical vibration damping properties of restructured chicken breast ham. LWT - Food Science and Technology. San Diego: Elsevier, 2021, 138(Březen), p. 1-11. ISSN 0023-6438. [Detail]

SUDER, Jiří, Zdenko BOBOVSKÝ, Jakub MLOTEK, Michal VOCETKA, Zdeněk ZEMAN and Michal ŠAFÁŘ. Experimental analysis of temperature resistance of 3d printed PLA components. MM Science Journal. Praha: MM Publishing, 2021, 2021(March), p. 4322-4327. ISSN 1803-1269. [Detail]

PASTOR, Robert, Zdenko BOBOVSKÝ, Petr OŠČÁDAL, Jakub MĚSÍČEK, Marek PAGÁČ, Erik PRADA, Lubica MIKOVA and Ján BABJAK. OPTIMIZING A QUADRUPED ROBOT: A COMPARISON OF TWO METHODS. MM Science Journal. Praha: MM Publishing, 2021, 2021(June), p. 4348-4355. ISSN 1803-1269. [Detail]

ZEMAN, Zdeněk, Milan MIHOLA and Jiří SUDER. DESIGN OF ALGORITHMS FOR AUTOMATIC SELECTION OF DRIVE UNITS FOR MECHATRONIC DEVICES. MM Science Journal. Praha: MM Publishing, 2021, 2021(Červen 2021), p. 4362-4370. ISSN 1803-1269. [Detail]

ŠTRAMBERSKÝ, Radek, Václav PAVELKA, Tomáš PAWLENKA, Pavel ŠURÁNEK and L. MORZYNSKI. Cogeneration unit noise reduction by its case. MM Science Journal. Praha: MM Publishing, 2021, 2021(June), p. 4501-4504. ISSN 1803-1269. [Detail]

MIHOLA, Milan, Zdeněk ZEMAN and David FOJTÍK. AUTOMATION OF THE DESIGN OF THE CROSS-SECTION OF THE MANIPULATOR ARMS PROFILE. MM Science Journal. Praha: MM Publishing, 2021, 2021(Říjen 2021), p. 4863-4871. ISSN 1803-1269. [Detail]

PACAS, Lukáš. METHODOLOGY FOR THE UTILIZATION OF WASTE HEAT BY AIR-COOLED COMPRESSORS. MM Science Journal. Praha: MM Publishing, 2021, 2021(October 2021), p. 4918-4923. ISSN 1803-1269. [Detail]

SUDER, Jiří, Tomáš KOT, Alan PANEC and Michal VOCETKA. ANALYSIS OF INCREASING THE FRICTION FORCE OF THE ROBOT JAWS BY ADDING 3D PRINTED FLEXIBLE INSERTS. MM Science Journal. Praha: MM Publishing, 2021, 2021(December), p. 5322-5326. ISSN 1803-1269. [Detail]

BLEJCHAŘ, Tomáš, Sylva DRÁBKOVÁ and Václav JANUS. NUMERICAL MODELLING OF OSCILLATING FLOW FOR ENERGY HARVESTING. MM Science Journal. Praha: MM Publishing, 2021, 2021(December), p. 5360-5365. ISSN 1803-1269. [Detail]

MIHOLA, Milan, Zdeněk ZEMAN and David FOJTÍK. RESEARCH AND DEVELOPMENT OF A KNOWLEDGE-BASED DESIGN SYSTEM FOR DESIGNING SELECTED ELEMENTS OF MECHATRONIC DEVICES. MM Science Journal. Praha: MM Publishing, 2021, 2021(December 2021), p. 5381-5390. ISSN 1803-1269. [Detail]

MRKVICA, Ivan, Tibor JURGA, Aneta SLANINKOVÁ, Jozef JURKO, Anton PANDA and Pavel KRPEC. DESIGN OF A COMPUTER-AIDED GEAR MANUFACTURING TOOL - RACK-SHAPED CUTTER. MM Science Journal. Praha: MM Publishing, 2021, 2021(December), p. 5403-5409. ISSN 1803-1269. [Detail]

RICHTÁŘ, Michal, Petra MÜCKOVÁ, Jan FAMFULÍK and Jakub ŠMIRAUS. THE COMBUSTION ENGINE INTAKE MANIFOLD CFD MODELING DEPENDING ON THE AIRBOX CONFIGURATION. MM Science Journal. Praha: MM Publishing, 2021, 2021(6), p. 5421-5425. ISSN 1803-1269. [Detail]

ROJÍČEK, Jaroslav, Zbyněk PAŠKA, Martin FUSEK, František FOJTÍK and Dagmar LIČKOVÁ. A STUDY ON FEMU: INFLUENCE OF SELECTION OF EXPERIMENTS ON RESULTS FOR ABS-M30 MATERIAL. MM Science Journal. Praha: MM Publishing, 2021, 2021(December), p. 5426-5434. ISSN 1803-1269. [Detail]

ZAČAL, Jiří, Jan PAVLÍK and Ivana KUNZOVÁ. INFLUENCE OF SHAPE OF PRESSURE VESSEL SHELL ON BOLT WORKING LOAD AND TIGHTNESS. MM Science Journal. Praha: MM Publishing, 2021, 2021(December 2021), p. 5448-5451. ISSN 1803-1269. [Detail]

GRUSHKO, Stefan, Aleš VYSOCKÝ, Jiří SUDER, Ladislav GLOGAR and Zdenko BOBOVSKÝ. IMPROVING HUMAN AWARENESS DURING COLLABORATION WITH ROBOT: REVIEW. MM Science Journal. Praha: MM Publishing, 2021, 2021-12(December), p. 5475-5480. ISSN 1803-1269. [Detail]

DOSTÁL, Pavel and Marek SADÍLEK. Rationalization of the production of shaped inserts for rotors casting. MM Science Journal. MM Publishing, 2021, 2021(OCT 2021), p. 4803-4809. ISSN 1803-1269. [Detail]

ROJÍČEK, Jaroslav and Dagmar LIČKOVÁ. SIMPLE EVOLUTIONARY STRUCTURAL OPTIMIZATION FOR MULTIPLE MATERIALS. MM Science Journal. MM Publishing, 2021, 2021(October), p. 4818-4823. ISSN 1803-1269. [Detail]

BOJKO, Marian, Lukáš HERTL and Sylva DRÁBKOVÁ. METHODS OF CFD MODELLING OF TWIN-SCREW PUMPS FOR NON-NEWTONIAN MATERIALS. MM Science Journal. MM Publishing, 2021, 2021(December), p. 5366-5372. ISSN 1803-1269. [Detail]

ČADA, Radek and Pavel LOŠÁK. Optimization of Bellows and Tubes Cutting by Disc Knife to Achieve the Minimum Burr Size. MM Science Journal. MM Publishing, 2021, 14(6), p. 5373-5380. ISSN 1803-1269. [Detail]

FOLTA, Zdeněk, Pavel SKALNÝ, Petr MATĚJKA, Miroslav TROCHTA and Daniel PIŠŤÁČEK. PROBABILISTIC ANALYSIS OF THE MAXIMAL LOAD OF INDUSTRIAL MACHINES. MM Science Journal. MM Publishing, 2021, 2021(DECEMBER), p. 5391-5395. ISSN 1803-1269. [Detail]

HRABOVSKÝ, Leopold and Zdeněk FOLTA. Detectors of Mechanical Stress Limiting Effects of Crane Structure Deformation. MM Science Journal. MM Publishing, 2021, 2021(DECEMBER), p. 5396-5402. ISSN 1803-1269. [Detail]

NEČAS, Libor and Josef NOVÁK. THE NETWORKING OF MAINTENANCE ENTITIES FOR PRODUCTION AND OTHER PROCESSES. MM Science Journal. MM Publishing, 2021, 2021(prosinec), p. 5410-5413. ISSN 1803-1269. [Detail]

PAŠKA, Zbyněk, Jaroslav ROJÍČEK, Dagmar LIČKOVÁ, František FOJTÍK, Martin FUSEK and Václav KRYS. LOAD CAPACITY OF HELICOIL(R) INSERTS IN ABS-M30 MATERIAL USED FOR ADDITIVE MANUFACTURING. MM Science Journal. MM Publishing, 2021, p. 5414-5420. ISSN 1803-1269. [Detail]

SCHINDLEROVÁ, Vladimíra and Ivana ŠAJDLEROVÁ. COMPARISON OF BASIC MAINTENANCE CONCEPTS USING WITNESS. MM Science Journal. MM Publishing, 2021, 2021(December), p. 5435-5440. ISSN 1803-1269. [Detail]

ŠPROCH, Filip and Jan NEVIMA. USE OF SMART 3D PRINTING TECHNOLOGY IN CONVENTIONAL ENGINEERING PRODUCTION TO DETECT AND PREVENT THE OCCURRENCE OF DEFECTS. MM Science Journal. MM Publishing, 2021, 2021(December), p. 5441-5447. ISSN 1803-1269. [Detail]

HRABOVSKÝ, Leopold and David BOROVSKÝ. Laboratory device for checking the functionality of the elevator rope sensors. Management Systems in Production Engineering. De Gruyter, 2021, Volume 29(Issue 1), p. 59-64. ISSN 2299-0461. [Detail]

VAŠINA, Martin, Marek PÖSCHL and Petr ZÁDRAPA. Influence of Rubber Composition on Mechanical Properties. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2021, 21(2), p. 260-268. ISSN 1213-2489. [Detail]

DOSTÁL, Pavel, Marek SADÍLEK, Lukáš KUŠNÍR, Karel KOURIL and Robert ČEP. Increased Cutting Conditions when Machining Heat-Resistant Steel Using Replaceable Inserts. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2021, 21(5), p. 592-599. ISSN 1213-2489. [Detail]

MONKOVA, Katarina, Martin VAŠINA, Milan ZALUDEK, Peter Pavol MONKA and Jozef TKAC. Mechanical Vibration Damping and Compression Properties of a Lattice Structure. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(6), p. 1-16. ISSN 1996-1944. [Detail]

POESCHL, Marek and Martin VAŠINA. Study of the Mechanical, Sound Absorption and Thermal Properties of Cellular Rubber Composites Filled with a Silica Nanofiller. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(23), p. 1-18. ISSN 1996-1944. [Detail]

ŠOFER, Michal, Jakub CIENCIALA, Martin FUSEK, Pavel PAVLÍČEK and Richard MORAVEC. Damage Analysis of Composite CFRP Tubes Using Acoustic Emission Monitoring and Pattern Recognition Approach. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(4), p. nestránkováno. ISSN 1996-1944. [Detail]

PETRŮ, Jana, Marek PAGÁČ and Martin GREPL. Laser Beam Drilling of Inconel 718 and Its Effect on Mechanical Properties Determined by Static Uniaxial Tensile Testing at Room and Elevated Temperatures. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(11), p. nestránkováno. ISSN 1996-1944. [Detail]

PELIKAN, Lukas, Michal SLANY, Libor BERANEK, Vladislav ANDRONOV, Martin NECAS and Lenka ČEPOVÁ. Experimental Investigation of Suitable Cutting Conditions of Dry Drilling into High-Strength Structural Steel. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(16), p. nestránkováno. ISSN 1996-1944. [Detail]

KUNČICKÁ, Lenka, Radim HALAMA and Martin FUSEK. Special Issue: Selected Papers from Experimental Stress Analysis 2020. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(5), p. nestránkováno. ISSN 1996-1944. [Detail]

POKORNÝ, Peter, Štefan VÁCLAV, Jana PETRŮ and Michaela KRITIKOS. Porosity Analysis of Additive Manufactured Parts Using CAQ Technology. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(5), p. nestránkováno. ISSN 1996-1944. [Detail]

BHATTACHARYA, Shibaprasad, Kanak KALITA, Robert ČEP and Shankar CHAKRABORTY. A Comparative Analysis on Prediction Performance of Regression Models during Machining of Composite Materials. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(21), p. nestránkováno. ISSN 1996-1944. [Detail]

STOLARIK, Gabriel, Akash NAG, Jana PETRŮ, Jaroslava SVOBODOVA and Sergej HLOCH. Ultrasonic Pulsating Water Jet Peening: Influence of Pressure and Pattern Strategy. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(20), p. nestránkováno. ISSN 1996-1944. [Detail]

MILOSEVIC, Mijodrag, Robert ČEP, Lenka ČEPOVÁ, Dejan LUKIC, Aco ANTIC and Mica DJURDJEV. A Hybrid Grey Wolf Optimizer for Process Planning Optimization with Precedence Constraints. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(23), p. nestránkováno. ISSN 1996-1944. [Detail]

SRIVASTAVA, Madhulika, Akash NAG, Lucie KREJČÍ, Jana PETRŮ, Somnath CHATTOPADHYAYA and Sergej HLOCH. Effect of Periodic Water Clusters on AISI 304 Welded Surfaces. Materials. BASEL: MDPI Open Access Publishing, 2021, 14(1), p. nestránkováno. ISSN 1996-1944. [Detail]

ČILLIKOVÁ, M., A. MIČIETOVÁ, Robert ČEP, B. MIČIETA, M. NESLUŠAN and P. KEJZLAR. Asymmetrical barkhausen noise of a hard milled surface. Materials. Basilej: MDPI Open Access Publishing, 2021, 14(5), p. 1-12. ISSN 1996-1944. [Detail]

FUSEK, Martin, Zbyněk PAŠKA, Jaroslav ROJÍČEK and František FOJTÍK. Parameters identification of the anand material model for 3d printed structures. Materials. Basilej: MDPI Open Access Publishing, 2021, 14(3), p. 1-14. ISSN 1996-1944. [Detail]

SADÍLEK, Marek, Zdeněk PORUBA, Lenka ČEPOVÁ and M. ŠAJGALÍK. Increasing the accuracy of free-form surface multiaxis milling. Materials. Basilej: MDPI Open Access Publishing, 2021, 14(1), p. 1-16. ISSN 1996-1944. [Detail]

MARŠÁLEK, Pavel, Martin ŠOTOLA, David RYBANSKÝ, Vojtěch ŘEPA, Radim HALAMA, Martin FUSEK and Jiří PROKOP. Modeling and testing of flexible structures with selected planar patterns used in biomedical applications. Materials. Basilej: MDPI Open Access Publishing, 2021, 14(1), p. 1-16. ISSN 1996-1944. [Detail]

RYBANSKÝ, David, Martin ŠOTOLA, Pavel MARŠÁLEK, Zdeněk PORUBA and Martin FUSEK. Study of optimal cam design of dual-axle spring-loaded camming device. Materials. Basilej: MDPI Open Access Publishing, 2021, 14(8), p. nestránkováno. ISSN 1996-1944. [Detail]

SNOPIŃSKI, P., A. WOŹNIAK and Marek PAGÁČ. Microstructural evolution, hardness, and strengthening mechanisms in SLM AlSi10Mg Alloy subjected to equal-channel angular pressing (ECAP). Materials. Basilej: MDPI Open Access Publishing, 2021, 14(24), p. nestránkováno. ISSN 1996-1944. [Detail]

KOŘÍNEK, Michal, Radim HALAMA, František FOJTÍK, Marek PAGÁČ, Jiří KRČEK, David KRZIKALLA, Radim KOCICH and Lenka KUNČICKÁ. Monotonic Tension-Torsion Experiments and FE Modeling on Notched Specimens Produced by SLM Technology from SS316L. Materials. MDPI Open Access Publishing, 2021, 14(1), p. 1-15. ISSN 1996-1944. [Detail]

FOJTÍK, František, Jan PAPUGA, Martin FUSEK and Radim HALAMA. Validation of multiaxial fatigue strength criteria on specimens from structural steel in the high-cycle fatigue region. Materials. MDPI Open Access Publishing, 2021, 14(1), p. 1-20. ISSN 1996-1944. [Detail]

LORENZ, Filip, Vit JANOS, Dušan TEICHMANN and Michal DORDA. Time Coordination of Periodic Passenger Train Connections in Conditions of Single-Track Lines. Mathematical Problems in Engineering. Londýn: Hindawi, 2021, 2021(Březen), p. nestránkováno. ISSN 1024-123X. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. Motion of an Unbalanced Impact Body Colliding with a Moving Belt. Mathematics. BASEL: MDPI Open Access Publishing, 2021, 9(9), p. nestránkováno. ISSN 2227-7390. [Detail]

HASLINGER, Jaroslav, Radek KUČERA, Kristina MOTYČKOVÁ and Václav ŠÁTEK. Numerical modeling of the leak through semipermeable walls for 2D/3D Stokes flow: experimental scalability of dual algorithms. Mathematics. BASEL: MDPI Open Access Publishing, 2021, 9(22), p. nestránkováno. ISSN 2227-7390. [Detail]

POPOVIĆ, B., Lenka ČEPOVÁ, Robert ČEP, M. JANEV and L. KRSTANOVIĆ. Measure of similarity between gmms by embedding of the parameter space that preserves kl divergence. Mathematics. Basilej: MDPI Open Access Publishing, 2021, 9(9), p. nestránkováno. ISSN 2227-7390. [Detail]

GRAF, Vojtěch, Dušan TEICHMANN, Michal DORDA and Lenka KONTRIKOVÁ. Dynamic Model of Contingency Flight Crew Planning Extending to Crew Formation. Mathematics. MDPI Open Access Publishing, 2021, 9(17), p. nestránkováno. ISSN 2227-7390. [Detail]

HASLINGER, Jaroslav, Radek KUČERA, Taoufik SASSI and Václav ŠÁTEK. Dual strategies for solving the Stokes problem with stick-slip boundary conditions in 3D. Mathematics and computers in simulation. New York: Elsevier Science, 2021, 189(November), p. 191-206. ISSN 0378-4754. [Detail]

ROJÍČEK, Jaroslav, Martin ČERMÁK, Radim HALAMA, Zbyněk PAŠKA and M. VAŠKO. Material model identification from set of experiments and validation by DIC. Mathematics and computers in simulation. New York: Elsevier Science, 2021, Volume 189(November 2021), p. 339-367. ISSN 0378-4754. [Detail]

HRABOVSKÝ, Leopold and Karel FRYDRÝŠEK. Testing Device for Hydraulic Rope System Tensile Force Equalizing Unit. Mechanics and Mechanical Engineering. Wydawnictwo Politechniki Lodzkiej, 2021, 25(1), p. 22-31. ISSN 1428-1511. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and Jan KOZÁNEK. Effect of the controllable support elements lubricated by magnetically sensitive fluids on chaotic and regular vibration of flexible rotors during rubbing. Mechanism and Machine Theory. Elsevier, 2021, 155(JAN), p. 1-11. ISSN 0094-114X. [Detail]

VIRGALA, Ivan, Michal KELEMEN, Erik PRADA, Marek SUKOP, Tomáš KOT, Zdenko BOBOVSKÝ, Martin VARGA and Peter FERENČÍK. A snake robot for locomotion in a pipe using trapezium-like travelling wave. Mechanism and Machine Theory. San Diego: Elsevier, 2021, 158(April 2021, 104221), p. 1-21. ISSN 0094-114X. [Detail]

BROŽOVÁ, Silvie, Magdalena LISIŃSKA, Mariola SATERNUS, Bernadeta GAJDA, Gražyna SIMHA MARTYNKOVÁ and Aleš SLÍVA. Hydrometallurgical recycling process for mobile phone printed circuit boards using ozone. Metals. Basilej: MDPI Open Access Publishing, 2021, 11(5), p. 820. ISSN 2075-4701. [Detail]

HLINKA, Josef, Kamila DOSTÁLOVÁ, Kateřina PETEREK DĚDKOVÁ, R. MADEJA, Karel FRYDRÝŠEK, J. KOUTECKY, Pavel SOVA and T.E.L. DOUGLAS. Complex material and surface analysis of anterolateral distal tibial plate of 1.4441 steel. Metals. Basilej: MDPI Open Access Publishing, 2021, 12(1), p. nestránkováno. ISSN 2075-4701. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. Chaos identification of a colliding constrained body on a moving belt. Nonlinear Dynamics. Vídeň: Springer, 2021, 1(104), p. 2723–2732. ISSN 0924-090X. [Detail]

MICHALIK, Michalik, Jana FABIANOVA, Leopold HRABOVSKÝ, Marinko MASLARIĆ, Luboslav STRAKA and Jozef MACEJ. Assessment of a robot base production using CAM programming for the FANUC control system. Open Engineering. De Gruyter, 2021, 11(1), p. 922. ISSN 2391-5439. [Detail]

JABLONSKÁ, Jana, Milada KOZUBKOVÁ, Miroslav MAHDAL, Patrik MARCALIK, Jiří TŮMA, Marian BOJKO and Lumír HRUŽÍK. Spectral analysis of gaseous cavitation in water through multiphase mathematical and acoustic methods. PHYSICS OF FLUIDS. MELVILLE: AMER INST PHYSICS, 2021, 33(8), p. 1-9. ISSN 1070-6631. [Detail]

SAHARUDIN, Mohd Shahneel, Jiří HAJNYŠ, Tomasz KOZIOR, Damian GOGOLEWSKI and Pawel ZMARZLY. Quality of Surface Texture and Mechanical Properties of PLA and PA-Based Material Reinforced with Carbon Fibers Manufactured by FDM and CFF 3D Printing Technologies. Polymers. BASEL: MDPI Open Access Publishing, 2021, 13(11), p. nestránkováno. ISSN 2073-4360. [Detail]

PAGÁČ, Marek, Jiří HAJNYŠ, Phu MA QUOC, Lukáš JANČAR, Jan JANSA, Petr ŠTEFEK and Jakub MĚSÍČEK. A review of vat photopolymerization technology: Materials, applications, challenges, and future trends of 3d printing. Polymers. Basilej: MDPI Open Access Publishing, 2021, 13(4), p. 1-20. ISSN 2073-4360. [Detail]

KALOVÁ, Martina, Soňa RUSNÁKOVÁ, David KRZIKALLA, Jakub MĚSÍČEK, Radek TOMÁŠEK, Adéla PODEPŘELOVÁ, Marek PAGÁČ and Jiří ROSICKÝ. 3d printed hollow off-axis profiles based on carbon fiber-reinforced polymers: Mechanical testing and finite element method analysis. Polymers. Basilej: MDPI Open Access Publishing, 2021, 13(17), p. nestránkováno. ISSN 2073-4360. [Detail]

SIMHA MARTYNKOVÁ, Gražyna, Aleš SLÍVA, Gabriela KRATOŠOVÁ, Karla ČECH BARABASZOVÁ, Soňa ŠTUDENTOVÁ, Jan KLUSÁK, Silvie BROŽOVÁ, Tomáš DOKOUPIL and Sylva HOLEŠOVÁ. Polyamide 12 Materials study of morpho-structural changes during laser sintering of 3D printing. Polymers. MDPI Open Access Publishing, 2021, 13(5), p. nestránkováno. ISSN 2073-4360. [Detail]

MOURALOVA, Katerina, Ales POLZER, Libor BENES, Josef BEDNAR, Radim ZAHRADNICEK, Milan KALIVODA and Jiří FRIES. Multicut technology used in WEDM machining of Mar-M247. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Londýn: SAGE Publications Ltd, 2021, p. nestránkováno. ISSN 0954-4054. [Detail]

MOURALOVA, Katerina, Ales POLZER, Libor BENES, Josef BEDNAR, Radim ZAHRADNICEK, Tomas PROKES, Zdenek FIALA and Jiří FRIES. Machining of B1914 nickel-based superalloy using wire electrical discharge machining. Proceedings of the Institution of Mechanical Engineers. Part E: Journal of Process Mechanical Engineering. Londýn: SAGE Publications Ltd, 2021, p. nestránkováno. ISSN 0954-4089. [Detail]

SHANMUGASUNDAR, G, M VANITHA, Robert ČEP, Vikas KUMAR, Kanak KALITA and M RAMACHANDRAN. A Comparative Study of Linear, Random Forest and AdaBoost Regressions for Modeling Non-Traditional Machining. Processes. BASEL: MDPI Open Access Publishing, 2021, 9(11), p. nestránkováno. ISSN 2227-9717. [Detail]

JABLONSKÁ, Jana, Milada KOZUBKOVÁ and Marian BOJKO. Flow of oil and water through the nozzle and cavitation. Processes. Basilej: MDPI Open Access Publishing, 2021, 9(11), p. 1-14. ISSN 2227-9717. [Detail]

KOZUBKOVÁ, Milada, Jana JABLONSKÁ, Marian BOJKO, František POCHYLÝ and Simonová FIALOVÁ. Research of flow stability of non-newtonian magnetorheological fluid flow in the gap between two cylinders. Processes. Basilej: MDPI Open Access Publishing, 2021, 9(10), p. 1-16. ISSN 2227-9717. [Detail]

LANDRYOVÁ, Lenka, Jan SIKORA and Renata WAGNEROVÁ. The learning path to neural network industrial application in distributed environments. Processes. Basilej: MDPI Open Access Publishing, 2021, 9(12), p. nestránkováno. ISSN 2227-9717. [Detail]

TEICHMANN, Dušan, Michal DORDA and R. SOUSEK. Creation of preventive mass evacuation plan with the use of public transport. Reliability engineering and system safety. San Diego: Elsevier, 2021, 210(June 2021), p. nestránkováno. ISSN 0951-8320. [Detail]

HRABOVSKÝ, Leopold. Tension Force Equalizer in a Rope System Using a Proximity Sensor. Scientific Journal of Silesian University of Technology. Series Transport. Silesian University of Technology, 2021, 110-2021(1), p. 35-44. ISSN 0209-3324. [Detail]

HECZKO, Dominik, Petr OŠČÁDAL, Tomáš KOT, Daniel HUCZALA, Jan SEMJON and Zdenko BOBOVSKÝ. Increasing the Reliability of Data Collection of Laser Line Triangulation Sensor by Proper Placement of the Sensor. Sensors. BASEL: MDPI Open Access Publishing, 2021, 21(8), p. nestránkováno. ISSN 1424-3210. [Detail]

GRUSHKO, Stefan, Aleš VYSOCKÝ, Dominik HECZKO and Zdenko BOBOVSKÝ. Intuitive Spatial Tactile Feedback for Better Awareness about Robot Trajectory during Human-Robot Collaboration. Sensors. BASEL: MDPI Open Access Publishing, 2021, 21(17), p. nestránkováno. ISSN 1424-3210. [Detail]

KLEMPA, Martin, Jan LÁTAL, Barbora GRAFOVÁ, Michal MATLOCH PORZER, Mojmír VRTEK, Antonín KUNZ and Petr ŠIŠKA. Inquiry into the Temperature Changes of Rock Massif Used in Energy Production in Relation to Season. Sensors. BASEL: MDPI Open Access Publishing, 2021, 21(21), p. nestránkováno. ISSN 1424-3210. [Detail]

KOT, Tomáš, Zdenko BOBOVSKÝ, Dominik HECZKO, Aleš VYSOCKÝ, Ivan VIRGALA and Erik PRADA. Using Virtual Scanning to Find Optimal Configuration of a 3D Scanner Turntable for Scanning of Mechanical Parts. Sensors. BASEL: MDPI Open Access Publishing, 2021, 21(16), p. nestránkováno. ISSN 1424-3210. [Detail]

GRUSHKO, Stefan, Aleš VYSOCKÝ, Petr OŠČÁDAL, Michal VOCETKA, Petr NOVÁK and Zdenko BOBOVSKÝ. Improved mutual understanding for human-robot collaboration: Combining human-aware motion planning with haptic feedback devices for communicating planned trajectory. Sensors. Basilej: MDPI Open Access Publishing, 2021, 21(11), p. nestránkováno. ISBN 0-000-00000-0. [Detail]

STRUŽ, Jiří, Lukáš HRUZÍK and Jiří HAVLÍK. Vibration Analysis of the Drivetrain in Dependence on the Type of Gearbox Suspension Bushing. Strojnícky časopis. Slovenská akademie věd, 2021, 71(1), p. 121-130. ISSN 0039-2472. [Detail]

HRUZÍK, Lukáš, Jiří STRUŽ and Květoslav KALÁB. Experimental Determination of Changing the Axial Force in the Bolts of the Clamping Sleeve Under Its Axial Load. Strojnícky časopis. Slovenská akademie věd, 2021, 71(1), p. 79-86. ISSN 0039-2472. [Detail]

MĚSÍČEK, Jakub, Lukáš JANČAR, Phu MA QUOC, Jiří HAJNYŠ, Tomasz TANSKI, Pavel KRPEC and Marek PAGÁČ. Comprehensive View of Topological Optimization Scooter Frame Design and Manufacturing. Symmetry. BASEL: MDPI Open Access Publishing, 2021, 13(7), p. nestránkováno. ISSN 2073-8994. [Detail]

ŠOTOLA, Martin, Pavel MARŠÁLEK, David RYBANSKÝ, Martin FUSEK and Dušan GABRIEL. Sensitivity Analysis of Key Formulations of Topology Optimization on an Example of Cantilever Bending Beam. Symmetry. MDPI Open Access Publishing, 2021, 13(4), p. 1-25. ISSN 2073-8994. [Detail]

KOVÁŘ, Ladislav, Pavel NOVÁK and Tomáš HAPLA. Lance Design for Scrap Melting Aggregates. Tehnički glasnik - Technical Journal. Varaždín: University North, 2021, 15(1), p. 162-167. ISSN 1846-6168. [Detail]

SLANY, Martin, Josef SEDLAK, Jan ZOUHAR, Oskar ZEMCIK, Josef CHLADIL, Ales JAROS, Karel KOURIL, Matus VARHANIK, Jozef MAJERIK, Igor BARENYI and Robert ČEP. Material and Dimensional Analysis of Bimetallic Pipe Bend with Defined Bending Radii. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2021, 28(3), p. 974-982. ISSN 1330-3651. [Detail]

SRIVASTAVA, Madhulika, Sergej HLOCH, Lucie KREJČÍ, Somnath CHATTOPADHYAYA, Nenad GUBELJAK and Marijana MILKOVIC. Utilizing the water hammer effect to enhance the mechanical properties of AISI 304 welded joints. The international journal of advanced manufacturing technology. Vídeň: Springer, 2021, p. nestránkováno. ISSN 0268-3768. [Detail]

HRABOVSKÝ, Leopold, Daniel ČEPICA and Karel FRYDRÝŠEK. Detection of Mechanical Stress in the Steel Structure of a Bridge Crane. Theoretical and Applied Mechanics Letters. Elsevier, 2021, 11(2021)(5), p. 1-10. ISSN 2095-0349. [Detail]

FRYDRYCH, Jan, Lucie JEZERSKÁ, Ilona GERNDTOVÁ, David ANDERT, Lenka BRADÁČOVÁ and Veronika SASSMANOVÁ. Phytomass as a renewable energy source in conditions of the Czech Republic. Waste Forum. České ekologické manažerské centrum, 2021, 2(2), p. 126-136. ISSN 1804-0195. [Detail]

NAG, A., P. HVIZDOS, A.R. DIXIT, Jana PETRŮ and S. HLOCH. Influence of the frequency and flow rate of a pulsating water jet on the wear damage of tantalum. Wear. Lausanne: Elsevier Science SA, 2021, 477(1), p. nestránkováno. ISSN 0043-1648. [Detail]

HELEBRANT, František and Vlastimil MONI. PREDIKTIVNOST V ÚDRŽBĚ A TECHNICKÁ DIAGNOSTIKA - NEZÁVISLÝ POHLED NA DANOU PROBLEMATIKU. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2021, 2021(2), p. 29-36. ISSN 1213-1660. [Detail]

HIRMAN, David. Rozvoj techniky imisního monitoringu v měřicí síti Výzkumného ústavu pro hnědé uhlí a.s. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2021, 4(12/2021), p. 3 - 8. ISSN 1213-1660. [Detail]

ŘEHOŘ, Michal, Pavel SCHMIDT and František HELEBRANT. Změny klimatu v širší oblasti Mostecké pánve a jejich dopady na hornictví a rekultivace se zaměřením na vývoj koncentrací imisí v ovzduší. Zpravodaj Hnědé uhlí. 2021, 2021(3), p. 3-19. ISSN 1213-1660. [Detail]

LESŇÁK, Michal, Pavel MARŠÁLEK, Petr HORYL and Jaromír PIŠTORA. Load-Bearing Capacity Modelling and Testing of SingleStranded Wire Rope. Acta Montanistica Slovaca. Technická univerzita v Košiciach, 2020, 25(2), p. 192-200. ISSN 1335-1788. [Detail]

GRUSZKA, K., A.P. DURAJSKI, P. NIEGODAJEW, A. WAWRZYNIAK, R. GNATOWSKA, M. BĘBEN and Michal ŠOFER. Studies of acoustic wave propagation when facing obstacle. Acta Physica Polonica A. Zabrze: Polish Academy of Sciences, 2020, 138(2), p. 280-285. ISSN 0587-4246. [Detail]

ŠOFER, Pavel, Michal ŠOFER, Jan GEBAUER, Pawel NIEGODAJEW and Konrad GRUSZKA. Utilization of Rayleigh Waves for Engine Oil Level Measurements. Acta Physica Polonica A. Polish Academy of Sciences, 2020, 138(2), p. 272-275. ISSN 0587-4246. [Detail]

SUDER, Jiří, Michal VOCETKA, Tomáš KOT, František FOJTÍK and Martin FUSEK. TESTING OF GLUED JOINTS ON PLASTIC PARTS MANUFACTURED USING FFF TECHNOLOGY. Acta Polytechnica. České vysoké učení technické v Praze, 2020, 60(6), p. 512-517. ISSN 1210-2709. [Detail]

PETRŮ, Jana, Lukáš DRÁBEK, Jiří HAJNYŠ, Dalibor JUROK, Marek PAGÁČ and Jakub MĚSÍČEK. Experimental Investigation of Cutting Forces in High-Feed Milling of Titanium Alloy. Advances in Science and Technology Research Journal. Lublin: Lublin University of Technology, 2020, 14(1), p. 89-95. ISSN 2080-4075. [Detail]

HRABOVSKÝ, Leopold and Tomáš MLČÁK. Vertical forces acting on the lock-off element of the pallet brake system. Advances in Science and Technology Research Journal. Lublin University of Technology, 2020, 14(1), p. 116-126. ISSN 2080-4075. [Detail]

HRABOVSKÝ, Leopold, Vieroslav MOLNÁR, Gustav KOTAJNÝ and Jozef KUĽKA. Pallet fixing lock, determination of shear resistance and spring stiffness. Advances in Science and Technology Research Journal. Lublin University of Technology, 2020, 14(2), p. 190-197. ISSN 2080-4075. [Detail]

HRABOVSKÝ, Leopold, Antonín DURNA, Jiří FRIES and Jiří REŽNAR. Gravitation auger water separator from a suspension of wet bulk material. Advances in Science and Technology Research Journal. Lublin University of Technology, 2020, 14(4), p. 58-67. ISSN 2080-4075. [Detail]

GURÁŠ, Radek and Miroslav MAHDAL. Model of automatic parking house. Advances in Science, Technology and Engineering Systems. Walnut: ASTES Publishers, 2020, 5(2), p. 111-115. ISSN 2415-6698. [Detail]

PAWLENKA, Tomáš, Jaromír ŠKUTA and Jiří KULHÁNEK. Electronic steering of the vehicle axle with force feedback. Advances in Science, Technology and Engineering Systems. Walnut: ASTES Publishers, 2020, 5(2), p. 280-286. ISSN 2415-6698. [Detail]

SIKORA, Jan and David FOJTÍK. Classification of timber load on trucks. Advances in Science, Technology and Engineering Systems. Walnut: ASTES Publishers, 2020, 5(2), p. 683-687. ISSN 2415-6698. [Detail]

HAJNYŠ, Jiří, Marek PAGÁČ, Jakub MĚSÍČEK, Jana PETRŮ and František ŠPALEK. RESEARCH OF 316L METALLIC POWDER FOR USE IN SLM 3D PRINTING. Advances in materials science. Varšava: De Gruyter, 2020, 20(1), p. 5-15. ISSN 2083-4799. [Detail]

KRZIKALLA, David, Aleš SLÍVA, Jakub MĚSÍČEK and Jana PETRŮ. ON MODELLING OF SIMULATION MODEL FOR RACING CAR FRAME TORSIONAL STIFFNESS ANALYSIS. Alexandria Engineering Journal. Elsevier, 2020, 6(59), p. 5123-5133. ISSN 1110-0168. [Detail]

HUCZALA, Daniel, Petr OŠČÁDAL, Tomáš SPURNÝ, Aleš VYSOCKÝ, Michal VOCETKA and Zdenko BOBOVSKÝ. Camera-Based Method for Identification of the Layout of a Robotic Workcell. Applied Sciences. BASEL: MDPI Open Access Publishing, 2020, 10(21), p. nestránkováno. ISSN 2076-3417. [Detail]

OŠČÁDAL, Petr, Daniel HUCZALA, Jan BÉM, Václav KRYS and Zdenko BOBOVSKÝ. Smart building surveillance system as shared sensory system for localization of agvs. Applied Sciences. Basilej: MDPI Open Access Publishing, 2020, 10(23), p. 1-13. ISSN 2076-3417. [Detail]

VYSOCKÝ, Aleš, Richard PAPŘOK, Jakub ŠAFAŘÍK, Tomáš KOT, Zdenko BOBOVSKÝ, Petr NOVÁK and Václav SNÁŠEL. Reduction in robotic arm energy consumption by particle swarm optimization. Applied Sciences. Basilej: MDPI Open Access Publishing, 2020, 10(22), p. 1-15. ISSN 2076-3417. [Detail]

VOCETKA, Michal, R. HUŇADY, M. HAGARA, Zdenko BOBOVSKÝ, Tomáš KOT and Václav KRYS. Influence of the approach direction on the repeatability of an industrial robot. Applied Sciences. Basilej: MDPI Open Access Publishing, 2020, 10(23), p. 1-24. ISSN 2076-3417. [Detail]

MOURALOVA, K, J BEDNAR, L BENES, P HRABEC, M KALIVODA and Jiří FRIES. The analysis of EDM electrodes wear in corners and edges. Archives of Civil and Mechanical Engineering. Vídeň: Springer, 2020, 20(4), p. nestránkováno. ISSN 1644-9665. [Detail]

MOURALOVA, Katerina, Libor BENES, Josef BEDNAR, Radim ZAHRADNICEK, Tomas PROKES and Jiří FRIES. Analysis of Machinability and Crack Occurrence of Steels 1.2363 and 1.2343ESR Machined by Die-Sinking EDM. Coatings. BASEL: MDPI Open Access Publishing, 2020, 10(4), p. nestránkováno. ISSN 2079-6412. [Detail]

MOURALOVA, Katerina, Libor BENES, Josef BEDNAR, Radim ZAHRADNICEK, Tomas PROKES, Zdenek FIALA and Jiří FRIES. Precision Machining of Nimonic C 263 Super AlloyUsing WEDM. Coatings. BASEL: MDPI Open Access Publishing, 2020, 10(6), p. nestránkováno. ISSN 2079-6412. [Detail]

SMUTNÝ, Pavel and Petra SCHREIBEROVÁ. Chatbots for learning: A review of educational chatbots for the Facebook Messenger. Computers and Education. Elsevier, 2020, 151(July 2020), p. 1-11. ISSN 0360-1315. [Detail]

KONEČNÝ, Petr, Petr LEHNER, Pratanu GHOSH, Zuzana MORÁVKOVÁ and Quang TRAN. Comparison of procedures for the evaluation of time dependent concrete diffusion coefficient model. Construction and Building Materials. San Diego: Elsevier, 2020, 258(October), p. nestránkováno. ISSN 0950-0618. [Detail]

FUSEK, Martin, Radim HALAMA and Dagmar LIČKOVÁ. Two modifications of Jiang criterion for constant amplitude multiaxial loading of AA2124-T851 and SS316L. Continuum Mechanics and Thermodynamics. Springer, 2020, p. nestránkováno. ISSN 0935-1175. [Detail]

KRÓL, M., M. MUSIORSKI and Marek PAGÁČ. Design and selective laser melting manufacturing of tpe extrusion die. Diffusion and Defect Data Pt.B:Solid State Phenomena. Zurich: Scitec Publications Ltd., 2020, 308, p. 51-63. ISSN 1012-0394. [Detail]

MOLNAR, Vieroslav, Gabriel FEDORKO, Stanislav HONUS, Miriam ANDREJIOVA, Anna GRINCOVA, Peter MICHALIK and Jakub PALENCAR. Research in placement of measuring sensors on hexagonal idler housing with regard to requirements of pipe conveyor failure analysis. Engineering Failure Analysis. PERGAMON-ELSEVIER SCIENCE LTD, 2020, 116(_), p. 1-13. ISSN 1350-6307. [Detail]

FRYDRÝŠEK, Karel, Tomas HALO, David ČEPICA, Ondřej SKOUPÝ, Šimon KRAUS, Václav HAVLAS and Jiří KOHUT. NUMERICAL SIMULATION OF STAPLES FOR EPIPHYSIODESIS. Engineering Mechanics 2020 : 26th international conference : November 24-25, 2020, Brno, Czech Republic : book of full texts. Czech Academy of Sciences, 2020, 1(26), p. pages 186 - 189. ISSN 1805-8248. [Detail]

NEVRLÝ, Václav, Michal DOSTÁL, Vít KLEČKA, Petr BITALA, Václav VÁLEK, Michal VAŠINEK, Tomáš BLEJCHAŘ, Jan SUCHÁNEK, Zdeněk ZELINGER and Jan WILD. TDLAS-based in situ diagnostics for the combustion of preheated ultra-lean dimethyl ether/air mixtures. Fuel. San Diego: Elsevier, 2020, 263(Březen), p. nestránkováno. ISSN 0016-2361. [Detail]

KRZYŻYŃSKA, R., Zbyszek SZELIGA, Lukáš PILAŘ, Karel BOROVEC and P. REGUCKI. High mercury emission (both forms: Hg0 and Hg2+) from the wet scrubber in a full-scale lignite-fired power plant. Fuel. San Diego: Elsevier, 2020, 270(Volume 270), p. nestránkováno. ISSN 0016-2361. [Detail]

SLÍVA, Aleš, Robert BRÁZDA, Aleš PROCHÁZKA, Jana PETRŮ, Karla ČECH BARABASZOVÁ and Gražyna SIMHA MARTYNKOVÁ. Titanium white modification with silica nanoparticles and formation of structured clusters on vibrating screen. Granular Matter. Springer, 2020, 22(3), p. 1-10. ISSN 1434-5021. [Detail]

RUSZ, Stanislav, Ondřej HILŠER, Vladislav OCHODEK, Lubomír ČÍŽEK, Martin KRAUS, Vratislav MAREŠ, Adam GRAJCAR and Jiří ŠVEC. EFFECT OF SEVERE PLASTIC DEFORMATION ON MECHANICAL AND FATIGUE BEHAVIOR OF MEDIUM-C SHEET STEEL. Journal of Mining and Metallurgy. Bělehrad: Univerzitet u Beogradu, 2020, 56(2), p. 161-170. ISSN 1450-5339. [Detail]

SIGAEVA, Taisiya, Stanislav POLZER, Radek VITÁSEK and Elena S DI MARTINO. Effect of testing conditions on the mechanical response of aortic tissues from planar biaxial experiments: Loading protocol and specimen side. Journal of the Mechanical Behavior of Biomedical Materials. New York: Elsevier Science, 2020, 111(1.11.2020), p. nestránkováno. ISSN 1751-6161. [Detail]

RUDOLF, Lukáš, Jiří FRIES and Oldřich UČEŇ. Long spindle design for grinding. MM Science Journal. Praha: MM Publishing, 2020, 2020(March), p. 3764-3768. ISSN 1803-1269. [Detail]

DURNA, Antonín and Jiří FRIES. Universal Machine For Prototype Production. Trans. Gabriela CHUDAŠOVÁ. MM Science Journal. Praha: MM Publishing, 2020, 2020(March), p. 3769-3773. ISSN 1803-1269. [Detail]

DOSTÁL, Pavel, Marek SADÍLEK, Jaroslav DUBSKÝ and Pavel SZKANDERA. ACCURACY OF MACHINE TOOLS. MM Science Journal. Praha: MM Publishing, 2020, 2020(March 2020), p. 3832-3836. ISSN 1803-1269. [Detail]

BAJTEK, Vojtěch, Karel FRYDRÝŠEK and L. PLEVA. Stochastic strength analysis of compression headless screw. MM Science Journal. Praha: MM Publishing, 2020, 2020(March), p. 3837-3840. ISSN 1803-1269. [Detail]

NEVŘELA, Martin, Michal WEISZ, Jan SZWEDA and Martin VAŠINA. REMOVING ADDITIVE NOISE IN MEASUREMENTS OF LOW SOUND PRESSURE LEVELS. MM Science Journal. Praha: MM Publishing, 2020, 2020(OCTOBER 2020), p. 4015-4018. ISSN 1803-1269. [Detail]

NEČAS, Libor. Training and practice to ensure implementation of the TPM system. MM Science Journal. Praha: MM Publishing, 2020, 2020(November), p. 4124-4127. ISSN 1803-1269. [Detail]

GRUSHKO, Stefan, Vyomkesh Kumar JHA, Aleš VYSOCKÝ, Robert PASTOR, Erik PRADA, Lubica MIKOVA and Zdenko BOBOVSKÝ. Tuning Perception and Motion Planning Parameters for Moveit! Framework. MM Science Journal. Praha: MM Publishing, 2020, 2020(November 2020), p. 4154-4163. ISSN 1803-1269. [Detail]

BUČKO, Michal, Vladimíra SCHINDLEROVÁ and Ivo HLAVATÝ. APPLICATION OF SIX SIGMA TOOLS IN THE PRODUCTION OF WELDED CHASSIS FRAMES. MM Science Journal. Praha: MM Publishing, 2020, 2020(December), p. 4188-4193. ISSN 1803-1269. [Detail]

SZOTKOWSKI, Tomáš, Ivan MRKVICA and Filip KOWALOVSKI. Optimization coating of cylindrical tools with fixture for increasing machine capacity. MM Science Journal. Praha: MM publishing Ltd., 2020, 2020(March), p. 3841-3845. ISSN 1803-1269. [Detail]

MOSTÝN, Vladimír, Daniel HUCZALA, Wojciech MOCZULSKI and Anna TIMOFIEJCZUK. Dimensional Optimization of the Robotic Arm to Reduce Energy Consumption. MM Science Journal. MM Publishing, 2020, p. 3745-3753. ISSN 1803-1269. [Detail]

PAŠKA, Zbyněk, Jaroslav ROJÍČEK, Petr FERFECKI, Martin FUSEK, Václav KRYS and Dominik HECZKO. Methodology of arm design for mobile robot manipulator using topological optimization. MM Science Journal. MM Publishing, 2020, p. 3918-3925. ISSN 1803-1269. [Detail]

SUDER, Jiří, Zdenko BOBOVSKÝ, Zdeněk ZEMAN, Jakub MLOTEK and Michal VOCETKA. THE INFLUENCE OF ANNEALING TEMPERATURE ON TENSILE STRENGTH OF POLYLACTIC ACID. MM Science Journal. MM Publishing, 2020, p. 4132-4137. ISSN 1803-1269. [Detail]

JHA, Vyomkesh Kumar, Stefan GRUSHKO, Jakub MLOTEK, Tomáš KOT, Václav KRYS, Petr OŠČÁDAL and Zdenko BOBOVSKÝ. A Depth Image Quality Benchmark of Three Popular Low-Cost Depth Cameras. MM Science Journal. MM Publishing, 2020, Dec 2020(December 2020), p. 4194-4200. ISSN 1803-1269. [Detail]

DURNA, Antonín, Jiří FRIES, Leopold HRABOVSKÝ, Aleš SLÍVA and Jozef ŽARNOVSKÝ. RESEARCH AND DEVELOPMENT OF LASER ENGRAVING AND MATERIAL CUTTING MACHINE FROM 3D PRINTER. Management Systems in Production Engineering. Varšava: De Gruyter, 2020, 28(1), p. 47-52. ISSN 2299-0461. [Detail]

VAŠINA, Martin, Lumír HRUŽÍK and Adam BUREČEK. Study of factors affecting vibration damping properties of multilayer composite structures. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2020, 20(1), p. 104-109. ISSN 1213-2489. [Detail]

LICHOVNÍK, Jiří, Ondřej MIZERA, Marek SADÍLEK, Lenka ČEPOVÁ, Jan ZELINKA and Robert ČEP. Influence of tumbling bodies on surface roughness and geometric deviations by additive sls technology. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2020, 20(3), p. 342-346. ISSN 1213-2489. [Detail]

BUČKO, Michal, Vladimíra SCHINDLEROVÁ and Ivana ŠAJDLEROVÁ. Application of lean manufacturing methods to streamline the welding line. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2020, 20(2), p. 143-151. ISSN 1213-2489. [Detail]

SCHINDLEROVÁ, Vladimíra, Michal BUČKO and Ivana ŠAJDLEROVÁ. Potential of using burning equipment in the engineering company and metallurgy. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2020, 20(2), p. 244-249. ISSN 1213-2489. [Detail]

ŠPROCH, Filip, Vladimíra SCHINDLEROVÁ and Ivana ŠAJDLEROVÁ. Using 3D printing technology in prototype production to control the dimensions of complexly shaped products. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2020, 20(3), p. 385-393. ISSN 1213-2489. [Detail]

FERFECKI, Petr, Marek KONEČNÝ, Michal MOLČAN and Jaroslav ZAPOMĚL. Numerical Simulation and Experimental Analysis of the Magnetic Damping Effect Generated by a Moving Magnet. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2020, 20(6), p. 714-719. ISSN 1213-2489. [Detail]

VAŠINA, Martin, Marek POESCHL, Petr ZADRAPA, Dagmar MERINSKA and Milan ZALUDEK. Study of Carbon Black Types in SBR Rubber: Mechanical and Vibration Damping Properties. Materials. BASEL: MDPI Open Access Publishing, 2020, 2394(May 22), p. 1-18. ISSN 1996-1944. [Detail]

VAŠINA, Martin, Katarina MONKOVA, Peter Pavol MONKA, Drazan KOZAK and Jan VANCA. Effect of the Pore Shape and Size of 3D-Printed Open-Porous ABS Materials on Sound Absorption Performance. Materials. BASEL: MDPI Open Access Publishing, 2020, 13(20), p. 1-19. ISSN 1996-1944. [Detail]

MOURALOVA, Katerina, Libor BENES, Tomas PROKES, Josef BEDNAR, Radim ZAHRADNICEK, Robert JANKOVYCH, Jiří FRIES and Jakub VONTOR. Analysis of the Machinability of Copper Alloy Ampcoloy by WEDM. Materials. BASEL: MDPI Open Access Publishing, 2020, 13(4), p. nestránkováno. ISSN 1996-1944. [Detail]

SHIVAKOTI, Ishwer, Lewlyn L. R RODRIGUES, Robert ČEP, Premendra Mani PRADHAN, Ashis SHARMA and Akash Kumar BHOI. Experimental Investigation and ANFIS-Based Modelling During Machining of EN31 Alloy Steel. Materials. BASEL: MDPI Open Access Publishing, 2020, 13(14), p. nestránkováno. ISSN 1996-1944. [Detail]

KALITA, Kanak, Ranjan Kumar GHADAI, Lenka ČEPOVÁ, Ishwer SHIVAKOTI and Akash Kumar BHOI. Memetic Cuckoo-Search-Based Optimization in Machining Galvanized Iron. Materials. BASEL: MDPI Open Access Publishing, 2020, 13(14), p. nestránkováno. ISSN 1996-1944. [Detail]

MOHYLA, Petr, Jiří HAJNYŠ, Kristýna STERNADELOVÁ, Lucie KREJČÍ, Marek PAGÁČ, Kateřina KONEČNÁ and Pavel KRPEC. Analysis of Welded Joint Properties on an AISI316L Stainless Steel Tube Manufactured by SLM Technology. Materials. BASEL: MDPI Open Access Publishing, 2020, 13(19), p. nestránkováno. ISSN 1996-1944. [Detail]

ČEGAN, Tomáš, Marek PAGÁČ, Jan JUŘICA, Kateřina SKOTNICOVÁ, Jiří HAJNYŠ, Lukáš HORSÁK, Kamil SOUCEK and Pavel KRPEC. Effect of Hot Isostatic Pressing on Porosity and Mechanical Properties of 316 L Stainless Steel Prepared by the Selective Laser Melting Method. Materials. BASEL: MDPI Open Access Publishing, 2020, 13(19), p. nestránkováno. ISSN 1996-1944. [Detail]

MOURALOVA, Katerina, Libor BENES, Radim ZAHRADNICEK, Josef BEDNAR, Antonin ZADERA, Jiří FRIES and Vaclav KANA. WEDM Used for Machining High Entropy Alloys. Materials. BASEL: MDPI Open Access Publishing, 2020, 13(21), p. nestránkováno. ISSN 1996-1944. [Detail]

KRÓL, M., P. SNOPIŃSKI, Marek PAGÁČ, Jiří HAJNYŠ and Jana PETRŮ. Hot deformation treatment of grain-modified mg-li alloy. Materials. Basilej: MDPI Open Access Publishing, 2020, 13(20), p. 1-13. ISSN 1996-1944. [Detail]

HLINKA, Josef, Martin KRAUS, Jiří HAJNYŠ, Marek PAGÁČ, Jana PETRŮ, Z. BRYTAN and T. TANSKI. Complex corrosion properties of aisi 316L steel prepared by 3D printing technology for possible implant applications. Materials. Basilej: MDPI Open Access Publishing, 2020, 13(7), p. nestránkováno. ISSN 1996-1944. [Detail]

HAJNYŠ, Jiří, Marek PAGÁČ, Jakub MĚSÍČEK, Jana PETRŮ and M KRÓL. Influence of scanning strategy parameters on residual stress in the SLM process according to the bridge curvature method for AISI 316L stainless steel. Materials. Basilej: MDPI Open Access Publishing, 2020, 13(7), p. nestránkováno. ISSN 1996-1944. [Detail]

KRÓL, M., P. SNOPIŃSKI, Jiří HAJNYŠ, Marek PAGÁČ and D. ŁUKOWIEC. Selective laser melting of 18Ni-300 maraging steel. Materials. Basilej: MDPI Open Access Publishing, 2020, 13(19), p. nestránkováno. ISSN 1996-1944. [Detail]

SNOPIŃSKI, Przemysław, Tomasz TAŃSKI, Klaudiusz GOŁOMBEK, Stanislav RUSZ, Ondřej HILŠER, Tibor DONIČ, Paweł NUCKOWSKI and Marcin BENEDYK. Strengthening of AA5754 Aluminum Alloy by DRECE Process Followed by Annealing Response Investigation. Materials. MDPI Open Access Publishing, 2020, 13(2), p. 1-14. ISSN 1996-1944. [Detail]

HALAMA, Radim, Jan SIKORA, Martin FUSEK, Jaromír MEC, Jana BARTECKÁ and Renata WAGNEROVÁ. Billet Straightening by Three-Point Bending and Its Automation. Materials. MDPI Open Access Publishing, 2020, 2021(14), p. 1-15. ISSN 1996-1944. [Detail]

HRABOVSKÁ, Kamila, Ondřej ŽIVOTSKÝ, Jaroslav ROJÍČEK, Martin FUSEK, Vratislav MAREŠ and Yvonna JIRÁSKOVÁ. Surface magnetostriction of FeCoB amorphous ribbons analyzed using the magneto-optical Kerr microscopy. Materials. MDPI Open Access Publishing, 2020, 13(2), p. 257(1)-257(15). ISSN 1996-1944. [Detail]

HLAVÁČOVÁ, Irena, Marek SADÍLEK, Petra VÁŇOVÁ, Štefan SZUMILO and Martin TYČ. Influence of Steel Structure on Machinability by Abrasive Water Jet. Materials. MDPI Open Access Publishing, 2020, 13(19), p. 4424(1)-4424(17). ISSN 1996-1944. [Detail]

JUŘÍKOVÁ KUTIOVÁ, Kristýna, Jakub MĚSÍČEK and David KRZIKALLA. Experimental examination of adhesive bonded carbon fibre tube to aluminum alloy aw 7075. Materials Science Forum. Zürich: Trans Tech Publications, 2020, 994(994), p. 125-132. ISSN 1662-9752. [Detail]

GRAF, Vojtěch, Dušan TEICHMANN, Jiří HOŘÍNKA and Michal DORDA. Dynamic Model for Scheduling Crew Shifts. Mathematical Problems in Engineering. Londýn: Hindawi, 2020, 2020(30.5.2020), p. nestránkováno. ISSN 1024-123X. [Detail]

MOURALOVA, K., L. BENES, T. PROKES, J. BEDNAR, R. ZAHRADNICEK and Jiří FRIES. Machining of pure molybdenum using WEDM. Measurement. San Diego: Elsevier, 2020, 163(108010), p. nestránkováno. ISSN 0263-2241. [Detail]

ZAVADIL, Jaromír, J.S. BARTUNEK and David FOJTÍK. Analysis of periodicities in surface topography of cold rolled sheets using data captured by camera system. Measurement Science Review. Varšava: De Gruyter, 2020, 20(3), p. 145-149. ISSN 1335-8871. [Detail]

MOURALOVA, Katerina, Radim ZAHRADNICEK, Libor BENES, Tomas PROKES, Radim HRDY and Jiří FRIES. Study of Micro Structural Material Changes after WEDM Based on TEM Lamella Analysis. Metals. BASEL: MDPI Open Access Publishing, 2020, 10(7), p. nestránkováno. ISSN 2075-4701. [Detail]

LUKIC, D., Robert ČEP, J. VUKMAN, A. ANTIC, M. DJURDJEV and M. MILOSEVIC. Multi-criteria selection of the optimal parameters for high-speed machining of aluminum alloy al7075 thin-walled parts. Metals. Basilej: MDPI Open Access Publishing, 2020, 10(12), p. 1-22. ISSN 2075-4701. [Detail]

KOZÁK, Jindřich, Lucie KREJČÍ, Ivo HLAVATÝ, Robert ČEP and I. SAMARDŽIĆ. Utilization of diffraction analysis in the study of martensitic weld deposits using tungsten carbide particles on s235jr+n steel. Metalurgija. Záhřeb: Hrvatsko metalurško društvo (HMD), 2020, 59(4), p. 470-472. ISSN 0543-5846. [Detail]

ROUCHALOVÁ, Dana, Kamila ROUCHALOVÁ, Iva JANÁKOVÁ, Vladimír ČABLÍK and Sarah JANŠTOVÁ. Bioleaching of Iron, Copper, Lead, and Zinc from the Sludge Mining Sediment at Different Particle Sizes, pH, and Pulp Density Using Acidithiobacillus ferrooxidans. Minerals. BASEL: MDPI Open Access Publishing, 2020, 10(11), p. nestránkováno. ISSN 2075-163X. [Detail]

LAPCIK, Lubomir, Martin VAŠINA, Barbora LAPCIKOVA, Michal STANEK, Martin OVSIK and Yousef MURTAJA. Study of the material engineering properties of high-density poly(ethylene)/perlite nanocomposite materials. Nanotechnology Reviews. Berlín: Walter de Gruyter GmbH, 2020, 9(1), p. 1491-1499. ISSN 2191-9089. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. Dynamics of a non-autonomous double pendulum model forced by biharmonic excitation with soft stops. Nonlinear Dynamics. Vídeň: Springer, 2020, 99(3), p. 1909-1921. ISSN 0924-090X. [Detail]

KUČERA, Radek, Kristina MOTYČKOVÁ, Alexandros MARKOPOULOS and Jaroslav HASLINGER. On the inexact symmetrized globally convergent semi-smooth Newton method for 3D contact problems with Tresca friction: the R-linear convergence rate. Optimization methods and software. Philadelphia: Taylor & Francis, 2020, 35(1), p. 65-86. ISSN 1055-6788. [Detail]

VAŠINA, Martin, Katarina MONKOVA, Peter Pavol MONKA, Dražan KOZAK and Jozef TKAC. Study of the Sound Absorption Properties of 3D-Printed Open-Porous ABS Material Structures. Polymers. BASEL: MDPI Open Access Publishing, 2020, 1062(May 6), p. 1-14. ISSN 2073-4360. [Detail]

HLAVACEK, P., Sergej HLOCH, A. NAG, Jana PETRŮ, M. MULLER, M. HROMASOVÁ and Peter SRNÍČEK. Effect of rotation direction, traverse speed, and abrasive type during the hydroabrasive disintegration of a rotating Ti6Al4V workpiece. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. Londýn: SAGE Publications Ltd, 2020, 1(1), p. nestránkováno. ISSN 0954-4054. [Detail]

PETER, Lukáš, Stanislav POLZER, Jan KRACÍK, Martin ČERNÝ and Norbert NOURY. Mathematical model based on shape of pulse wave measured at single spot for non-invasive prediction of blood pressure. Processes. MDPI Open Access Publishing, 2020, 8(4), p. 1-14. ISSN 2227-9717. [Detail]

FAMFULÍK, Jan, Michal RICHTÁŘ, Radek ŘEHÁK, Jakub ŠMIRAUS, Pavel DRESLER, Martin FUSEK and Jana MÍKOVÁ. Application of hardware reliability calculation procedures according to ISO 26262 standard. Quality and Reliability Engineering International. Wiley, 2020, Volume 36(Issue 6 October 2020), p. 1822 - 1836. ISSN 0748-8017. [Detail]

PAGÁČ, Marek, David SCHWARZ, Jana PETRŮ and Stanislav POLZER. 3D printed polyurethane exhibits isotropic elastic behavior despite its anisotropic surface. Rapid Prototyping Journal. Bingley: Emerald, 2020, p. nestránkováno. ISSN 1355-2546. [Detail]

MANTIČ, Martin, Jozef KUĽKA, Melichar KOPAS, Eva FALTINOVA and Leopold HRABOVSKÝ. Limit states of steel supporting structure for bridge cranes. Scientific Journal of Silesian University of Technology. Series Transport. Silesian University of Technology, 2020, 108 - 2020(3 (108)), p. 141-158. ISSN 0209-3324. [Detail]

HRABOVSKÝ, Leopold, Gabriel FEDORKO, Lukáš MLÝNEK and Peter MICHALIK. Electromagnetic locking devices of car handling units. Scientific Journal of Silesian University of Technology. Series Transport. Silesian University of Technology, 2020, 107 - 2020(2, (107)), p. 73-83. ISSN 0209-3324. [Detail]

GRUSHKO, Stefan, Tomáš SPURNÝ and Martin ČERNÝ. Control Methods for Transradial Prostheses Based on Remnant Muscle Activity and Its Relationship with Proprioceptive Feedback. Sensors. Basilej: MDPI Open Access Publishing, 2020, 20(17), p. nestránkováno. ISBN 0-000-00000-0. [Detail]

OŠČÁDAL, Petr, Dominik HECZKO, Aleš VYSOCKÝ, Jakub MLOTEK, Petr NOVÁK, Ivan VIRGALA, Marek SUKOP and Zdenko BOBOVSKÝ. Improved pose estimation of aruco tags using a novel 3d placement strategy. Sensors. MDPI Open Access Publishing, 2020, 20(17), p. 1-16. ISSN 1424-3210. [Detail]

VYSOCKÝ, Aleš, Stefan GRUSHKO, Petr OŠČÁDAL, Tomáš KOT, Ján BABJAK, Rudolf JÁNOŠ, Marek SUKOP and Zdenko BOBOVSKÝ. Analysis of Precision and Stability of Hand Tracking with Leap Motion Sensor. Sensors. MDPI Open Access Publishing, 2020, 20(15), p. 4088. ISSN 1424-3210. [Detail]

HRABEC, Ladislav, Juraj SINAY and Michaela HRABCOVÁ. Použití alternativních paliv k pohonu vozidel z pohledu bezpečnosti provozu. Spravodaj ATD SR. Asociácia technických diagnostikov SR, 2020, 23(1), p. 21-28. ISSN 1337-8252. [Detail]

MIHELOVÁ, Silvia, Karel FRYDRÝŠEK and Roland JANČO. Solution of a gas pipeline buried in ground by stochastic approach. Strojnícky časopis. Bratislava: Slovak University of Technology in Bratislava, 2020, 70(1), p. 103-114. ISSN 0039-2472. [Detail]

MA QUOC, Phu, David KRZIKALLA, Jakub MĚSÍČEK, Jana PETRŮ, Jakub ŠMIRAUS, Aleš SLÍVA and Zdeněk PORUBA. On aluminum honeycomb impact attenuator designs for formula student competitions. Symmetry. Basilej: MDPI Open Access Publishing, 2020, 12(10), p. 1-17. ISSN 2073-8994. [Detail]

JANČAR, Lukáš, Marek PAGÁČ, Jakub MĚSÍČEK and Petr ŠTEFEK. Design procedure of a topologically optimized scooter frame part. Symmetry. Basilej: MDPI Open Access Publishing, 2020, 12(5), p. nestránkováno. ISSN 2073-8994. [Detail]

HUŇAŘ, Marek, Lukáš JANČAR, David KRZIKALLA, D. KAPRINAY and Dávid SRNÍČEK. Comprehensive view on racing car upright design and manufacturing. Symmetry. Basilej: MDPI Open Access Publishing, 2020, 12(6), p. nestránkováno. ISSN 2073-8994. [Detail]

KELEMENOVÁ, T., M. DOVICA, P. BOŽEK, I. KOLÁRIKOVÁ, O. BENEDIK, I. VIRGALA, E. PRADA, L. MIKOVÁ, Tomáš KOT and M. KELEMEN. Specific problems in measurement of coefficient of friction using variable incidence tribometer. Symmetry. Basilej: MDPI Open Access Publishing, 2020, 12(8), p. nestránkováno. ISSN 2073-8994. [Detail]

ŠOTOLA, Martin, David STARECZEK, David RYBANSKÝ, Jiří PROKOP and Pavel MARŠÁLEK. New Design Procedure of Transtibial Prosthesis Bed Stump Using Topological Optimization Method. Symmetry. MDPI Open Access Publishing, 2020, 12(11), p. 1-18. ISSN 2073-8994. [Detail]

VIRGALA, Ivan, Michal KELEMEN, Pavol BOŽEK, Zdenko BOBOVSKÝ, Martin HAGARA, Erik PRADA, Petr OŠČÁDAL and Martin VARGA. Investigation of Snake Robot Locomotion Possibilities in a Pipe. Symmetry. MDPI Open Access Publishing, 2020, 12(6), p. 25. ISSN 2073-8994. [Detail]

SINAY, Juraj, Ladislav HRABEC and Michaela HRABCOVÁ. Vývojové směry v oblasti alternativních pohonů automobilů - klady, zápory a rizika spojená s jejich provozem. Technická diagnostika. Asociace technických diagnostiků ČR, 2020, 29(z1), p. 122-131. ISSN 1210-311X. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Elektromobilita z pohledu maziv. Analýza požadavků na mazání elektrických systémů jako podpory či náhrady spalovacích motorů. Technická diagnostika. Asociace technických diagnostiků ČR, 2020, 29(z1), p. 21-30. ISSN 1210-311X. [Detail]

SCHINDLEROVÁ, Vladimíra, Ivana ŠAJDLEROVÁ, Vaclav MICHALCIK, Jan NEVIMA and Lucie KREJČÍ. Potential of Using TPM to Increase the Efficiency of Production Processes. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2020, 27(3), p. 737-743. ISSN 1330-3651. [Detail]

LEHOCKA, Dominika, Frantisek BOTKO, Jiri KLICH, Libor SITEK, Pavol HVIZDOS, Martin FIDES and Robert ČEP. Effect of pulsating water jet disintegration on hardness and elasticity modulus of austenitic stainless steel AISI 304L. The international journal of advanced manufacturing technology. Vídeň: Springer, 2020, x(5-6), p. nestránkováno. ISSN 0268-3768. [Detail]

KOTŮLEK, Jan and Helena DURNOVÁ. Václav Hlavatý a reformy vzdělávání 1945-1948. Učitel matematiky. Jednota českých matematiků a fyziků, 2020, 28(4), p. 234-252. ISSN 1210-9037. [Detail]

POKORNÝ, Jiří, Lenka BRUMAROVÁ, Horst GONDEK, M TOMÁŠKOVÁ and Vladimír VLČEK. Aktuální stav posuzování požární bezpečnosti staveb s výhledem do budoucnosti. Vytápění, větrání, instalace. Praha: Společnost pro techniku prostředí, 2020, 29(1), p. 36-41. ISSN 1210-1389. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and Paola FORTE. Vibrations attenuation of a Jeffcott rotor by application of a new mathematical model of a magnetorheological squeeze film damper based on a bilinear oil representation. Acta Mechanica. Vídeň: Springer, 2019, 230(5), p. 1625-1640. ISSN 0001-5970. [Detail]

BRZOBOHATÝ, Tomáš, Marta JAROŠOVÁ, Radek KUČERA and Václav ŠÁTEK. Path-following interior point method: Theory and applications for the Stokes flow with a stick-slip boundary condition. Advances in Engineering Software. SAN DIEGO: Elsevier, 2019, 129(March), p. nestránkováno. ISSN 0965-9978. [Detail]

HRABOVSKÝ, Leopold, Tomáš MLČÁK and Gustav KOTAJNÝ. Forces generated in the parking brake of the pallet locking system. Advances in science and technology-research journal. Lublin University of Technology, 2019, 2019/13(4), p. 181-187. ISSN 2299-8624. [Detail]

HRABOVSKÝ, Leopold. Tensile Forces in Lift Carrier Ropes Exerted by the Fluid Pressure. Advances in science and technology-research journal. Lublin University of Technology, 2019, 13(3), p. 31-37. ISSN 2299-8624. [Detail]

SCHINDLEROVÁ, Vladimíra and Ivana ŠAJDLEROVÁ. USE OF THE DYNAMIC SIMULATION TO REDUCE HANDLING COMPLEXITY IN THE MANUFACTURING PROCESS. Advances in science and technology-research journal. Lublin University of Technology, 2019, 14(1), p. 81-88. ISSN 2299-8624. [Detail]

HRABOVSKÝ, Leopold, Martin MANTIČ and Věra VOŠTOVÁ. Adhesion Coefficient on the Limit of Slippage at Star-up of the Manual Crane Trolley. Advances in science and technology-research journal. Lublin University of Technology, 2019, 13(2/2019), p. 92-99. ISSN 2299-8624. [Detail]

PAPUGA, Jan and Radim HALAMA. Mean stress effect in multiaxial fatigue limit criteria. Archive of Applied Mechanics. Vídeň: Springer Verlag, 2019, 89(5), p. 823-834. ISBN 978-0-7918-5901-8. [Detail]

SNOPIŃSKI, Przemysław, Tomasz TAŃSKI, Krzysztof MATUS and Stanislav RUSZ. Microstructure, grain refinement and hardness of Al-3%Mg aluminium alloy processed by ECAP with helical die. Archives of Civil and Mechanical Engineering. Springer, 2019, 19(2), p. 287-296. ISSN 1644-9665. [Detail]

ZLÁMAL, Tomáš, Ivan MRKVICA, Tomáš SZOTKOWSKI and Šárka MALOTOVÁ. The Influence of Surface Treatment of PVD Coating on Its Quality and Wear Resistant. Coatings. Basilej: MDPI Open Access Publishing, 2019, 9(7), p. nestránkováno. ISSN 2079-6412. [Detail]

HASLINGER, Jaroslav, Radek KUČERA and Václav ŠÁTEK. Stokes system with local Coulomb's slip boundary conditions: Analysis of discretized models and implementation. Computers & Mathematics with Applications. Oxford: PERGAMON-ELSEVIER SCIENCE LTD, 2019, 77(6), p. 1655-1667. ISSN 0898-1221. [Detail]

TUN, Maw Maw and Dagmar JUCHELKOVÁ. Estimation of Greenhouse Gas Emissions: An Alternative Approach to Waste Management for Reducing the Environmental Impacts in Myanmar. Environmental Engineering Research. Korean Society of Mechanical Engineers, 2019, 8(4), p. 2025-2034. ISSN 1226-1025. [Detail]

TUN, Maw Maw and Dagmar JUCHELKOVÁ. Drying Methods for Municipal Solid Waste Quality Improvement in the Developed and Developing Countries: A Review. Environmental Engineering Research. Korean Society of Mechanical Engineers, 2019, 24(4), p. 529-542. ISSN 1226-1025. [Detail]

GHANIMEH, Sophia, Adriana GOMEZ-SANABRIA, Nina TSYDENOVA, Kristína ŠTRBOVÁ, Maria IOSSIFIDOU and Amit KUMAR. Two-Level Comparison of Waste Management Systems in Low-, Middle-, and High-Income Cities. Environmental Engineering Science. Mary Ann Liebert, 2019, 36(10), p. Neuveden. ISSN 1092-8758. [Detail]

IVAN, Igor, Jiří HORÁK, Lenka ZAJICKOVA, Jaroslav BURIAN and David FOJTÍK. Factors Influencing Walking Distance to the Preferred Public Transport Stop in selected urban centres of Czechia. GeoScape. Varšava: De Gruyter, 2019, 13(1), p. 16-30. ISSN 1802-1115. [Detail]

ŠKODA, Jan, Monika LOSERTOVÁ, Kateřina KONEČNÁ, Vojtěch MACHALLA and Petr CZYZ. Vliv mikrostruktury na mechanické vlastnosti v tahu a charakter lomových ploch slitiny Al-Mn. Hutnické listy. Ocelot, 2019, 72(6), p. 22-28. ISSN 0018-8069. [Detail]

HRABOVSKÝ, Leopold, Jozef KUĽKA and Peter MICHALIK. Device for Determining the Adhesion Coefficient at the Slippage Point. IOP Conference Series: Materials Science and Engineering. Volume 603. IOP Publishing, 2019, 603(1), p. 1-7. ISSN 1757-8981. [Detail]

HRABOVSKÝ, Leopold and Peter KOŠČÁK. Detection and Change of Tension Forces Operating on Elevator Hoist Ropes. IOP Conference Series: Materials Science and Engineering. Volume 603. IOP Publishing, 2019, 603(4), p. 1-8. ISSN 1757-8981. [Detail]

ŘÍHA, Lubomír, Michal MERTA, Radim VAVŘÍK, Tomáš BRZOBOHATÝ, Alexandros MARKOPOULOS, Ondřej MECA, Ondřej VYSOCKÝ, Tomáš KOZUBEK and Vít VONDRÁK. A massively parallel and memory-efficient FEM toolbox with a hybrid total FETI solver with accelerator support. International Journal of High Performance Computing Applications. SAGE Publications Ltd, 2019, 33(19.9.2018), p. 660-677. ISSN 1094-3420. [Detail]

VAŠINA, Martin, Marek PÖSCHL, Lumír HRUŽÍK, Adam BUREČEK, Kamila KOTRASOVÁ and Eva KORMANÍKOVÁ. Mechanical properties of rubber composite materials filled with nanofillers. International Journal of Modern Manufacturing Technologies. ModTech Publishing House, 2019, 11(3), p. 143-150. ISSN 2067-3604. [Detail]

PAWLENKA, Miroslav, Miroslav MAHDAL, Jiří TŮMA and Adam BUREČEK. Application of a bandpass filter for the active vibration control of high-speed rotors. International journal of acoustics and vibrations. [Itálie]: International Institute of Acoustics and Vibration, 2019, 24(3), p. 608-615. ISSN 1027-5851. [Detail]

DUTKIEWICZ, Jan, Stanislav RUSZ, Ondřej HILŠER, Tomasz TAŃSKI, Wojciech BOREK, Maciej SZLEZYNGER, Piotr BOBROWSKI and Wojciech MAZIARZ. Structure of MgLiAl alloys after various routes of severe plastic deformation studied by TEM. International journal of materials research. Hanser, 2019, 110(1), p. 24-31. ISSN 1862-5282. [Detail]

KRZIKALLA, David, Jakub MĚSÍČEK, Aleš SLÍVA, Jana PETRŮ and Jakub ŠMIRAUS. Analysis of Torsional Stiffness of the Frame of a Formula Student Vehicle. Journal of Applied Mechanical Engineering. Longdom Publishing, 2019, 8(315), p. 1-5. ISSN 2168-9873. [Detail]

ŠVÉDOVÁ, Barbora, Marek KUCBEL, Helena RACLAVSKÁ, Jana RŮŽIČKOVÁ, Konstantin RACLAVSKÝ and Veronika SASSMANOVÁ. Water-soluble ions in dust particles depending on meteorological conditions in urban environment. Journal of Environmental Management. San Diego: Elsevier, 2019, 237(15 February 2019), p. 322-331. ISSN 0301-4797. [Detail]

KUCBEL, Marek, Helena RACLAVSKÁ, Jana RŮŽIČKOVÁ, Barbora ŠVÉDOVÁ, Veronika SASSMANOVÁ, Jarmila DROZDOVÁ, Konstantin RACLAVSKÝ and Dagmar JUCHELKOVÁ. Properties of composts from household food waste produced in automatic composters. Journal of Environmental Management. San Diego: Elsevier, 2019, 236(15. April 2019), p. 657-666. ISSN 0301-4797. [Detail]

NAG, Akash, Sergej HLOCH, Dominik ČUHA, Amit Rai DIXIT, Jana PETRŮ, Hakan TOZAN, Monika HROMASOVA and Miroslav MUELLER. Acoustic chamber length performance analysis in ultrasonic pulsating water jet erosion of ductile material. Journal of Manufacturing Processes. San Diego: Elsevier, 2019, 47(11/2019), p. 347-356. ISSN 1526-6125. [Detail]

ŠOFER, Michal, Pavel KUČERA, Eva MAZANCOVÁ and Lucie KREJČÍ. Acoustic Emission and Fractographic Analysis of Seamless Steel Pressure Cylinders with Artificial Flaws Under Hydrostatic Burst Testing. Journal of Nondestructive Evaluation. Springer, 2019, 38(3), p. 1-13. ISSN 0195-9298. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and J. KOZÁNEK. The mathematical model for analysis of attenuation of nonlinear vibration of rigid rotors influenced by electromagnetic effects. Journal of Sound and Vibration. SAN DIEGO: Elsevier, 2019, 443, p. 167-177. ISSN 0022-460X. [Detail]

POLZER, Stanislav, T.C. GASSER, R. VLACHOVSKÝ, L. KUBÍČEK, L. LAMBERT, V. MAN, K. NOVÁK, M. SLAŽANSKÝ, J. BURŠA and R. STAFFA. Biomechanical indices are more sensitive than diameter in predicting rupture of asymptomatic abdominal aortic aneurysms. Journal of Vascular Surgery. San Diego: Elsevier, 2019, 71(2), p. 617-626. ISSN 0741-5214. [Detail]

MIKESKA, Marcel, Adam BUREČEK, Ondřej DUTKO, Pavlína PEIKERTOVÁ, Jana KUPKOVÁ, Lumír HRUŽÍK and Daniela PLACHÁ. Organovermiculite as regenerable adsorbent for treatment of heavily polluted waste water from coke industry. Journal of nanoscience and nanotechnology. American Scientific Publishers, 2019, 19(5), p. 2567-2574. ISSN 1533-4880. [Detail]

SLÍVA, Aleš, Robert BRÁZDA, Aleš PROCHÁZKA, Gražyna SIMHA MARTYNKOVÁ and Karla ČECH BARABASZOVÁ. Study of the Optimum Arrangement of Spherical Particles in Containers Having Different Cross Section Shapes. Journal of nanoscience and nanotechnology. American Scientific Publishers, 2019, 19(5), p. 2717-2722. ISSN 1533-4880. [Detail]

SLÍVA, Aleš, Robert BRÁZDA, Aleš PROCHÁZKA, Gražyna SIMHA MARTYNKOVÁ and Karla ČECH BARABASZOVÁ. Investigation of Geometric Properties of Modified Titanium White by Fluidisation for Use in The Process of Transport, Handling, Processing and Storage. Journal of nanoscience and nanotechnology. American Scientific Publishers, 2019, 19(5), p. 2997-3001. ISSN 1533-4880. [Detail]

MOTYKA, Oldřich, Kristína ŠTRBOVÁ, Eva OLŠOVSKÁ and Jana SEIDLEROVÁ. Influence of nano-ZnO exposure to plants on L-ascorbic acid levels: indication of nanoparticle-induced oxidative stress. Journal of nanoscience and nanotechnology. American Scientific Publishers, 2019, 19(5), p. 3019-3023. ISSN 1533-4880. [Detail]

ČABANOVÁ, Kristina, Oldřich MOTYKA, Pavlína PEIKERTOVÁ, Jana SEIDLEROVÁ, Ivana OLIVKOVÁ and Jana KUKUTSCHOVÁ. Settled dust from urban and suburban roads in an industrial city area: location and seasonal differences in metal content. Journal of nanoscience and nanotechnology. American Scientific Publishers, 2019, 19(5), p. 3035-3040. ISSN 1533-4880. [Detail]

ANTOŠ, Daniel, Radim HALAMA and Matěj BARTECKÝ. Cyclic plastic properties of a lead free solder. Key Engineering Materials. Volume 810. Trans Tech Publications, 2019, 810(July), p. 46-51. ISSN 1013-9826. [Detail]

HALAMA, Radim, Jana BARTECKÁ and Petr GÁL. FE prediction and extrapolation of multiaxial ratcheting for R7T steel. Key Engineering Materials. Volume 810. Trans Tech Publications, 2019, 810(July), p. 76-81. ISSN 1013-9826. [Detail]

SALEK, Richardos Nikolaos, Martin VAŠINA, Lubomir LAPCIK, Michaela CERNIKOVA, Eva LORENCOVA, Peng LI and Frantisek BUNKA. Evaluation of various emulsifying salts addition on selected properties of processed cheese sauce with the use of mechanical vibration damping and rheological methods. LWT - Food Science and Technology. San Diego: Elsevier, 2019, 107(Neuvedeno), p. 178-184. ISSN 0023-6438. [Detail]

OLIVKOVÁ, Ivana. Evaluation of the Quality of Public Transport Stops. Lecture Notes in Networks and Systems. Volume 68. Springer, 2019, 68(68), p. 14-23. ISSN 2367-3370. [Detail]

HRABOVSKÝ, Leopold and Václav JANEK. Determination of mining equipment motion resistance. MATEC Web of Conferences. Volume 263. EDP Sciences, 2019, 263(01003 (2019)), p. 1-12. ISSN 2261-236X. [Detail]

HRABOVSKÝ, Leopold and Václav JANEK. Determination of mining equipment motion resistance. MATEC Web of Conferences. Volume 263. EDP Sciences, 2019, 263(1), p. 1-12. ISSN 2261-236X. [Detail]

HRABOVSKÝ, Leopold, Jozef KUĽKA and Martin MANTIČ. Experimental expression of the resistance of belt conveyor's plough. MATEC Web of Conferences. Volume 263. EDP Sciences, 2019, 263, 2019(263, 2019), p. 1-8. ISSN 2261-236X. [Detail]

ZLÁMAL, Tomáš, Ivan MRKVICA, Šárka MALOTOVÁ, Ondřej VORTEL and Tomáš VOPAT. EFFECT OF CUTTING TOOL MICROGEOMETRY ON THE ALUMINIUM ALLOY MACHINING PROCESS. MM Průmyslové spektrum. MM Publishing, 2019, 6(6), p. 2915-2919. ISSN 1212-2572. [Detail]

TŮMA, Jiří, Jiří ŠIMEK, Miroslav MAHDAL, Miroslav PAWLENKA and Václav PAVELKA. An actively controlled journal bearing with increased resistance to instability. MM Science Journal. Praha: MM Publishing, 2019, 2019(March), p. 2849-2854. ISSN 1803-1269. [Detail]

FOJTÍK, David, Petr PODEŠVA, Jan GEBAUER and Jiří CZEBE. Method of non-contact measuring of diameter and ovality of steel tubes during their production. MM Science Journal. Praha: MM Publishing, 2019, 2019(March), p. 2855-2860. ISSN 1803-1269. [Detail]

ŠURÁNEK, Pavel, Jiří CZEBE, Václav PAVELKA and Renata WAGNEROVÁ. Processing of operating deflection shapes. MM Science Journal. Praha: MM Publishing, 2019, 2019(March), p. 2861-2866. ISSN 1803-1269. [Detail]

KOZUBKOVÁ, Milada, Jana JABLONSKÁ, Marian BOJKO, Lukáš DVOŘÁK and Mária CARNOGURSKA. Multiphase fluid models to deal with fluid flow dynamics. MM Science Journal. Praha: MM Publishing, 2019, 2019(June), p. 2891-2896. ISSN 1803-1269. [Detail]

DVOŘÁK, Lukáš, Kamil FOJTÁŠEK, Miroslav KRAJČA and Miroslav BOVA. Test of doors obstruction detection sensor. MM Science Journal. Praha: MM Publishing, 2019, 2019(June), p. 2897-2901. ISSN 1803-1269. [Detail]

HRUŽÍK, Lumír, Adam BUREČEK, Lukáš DVOŘÁK, Kamil FOJTÁŠEK, P.P. MONKA, Martin VAŠINA and Miroslav BOVA. Valve control of drive with rotary hydraulic motor. MM Science Journal. Praha: MM Publishing, 2019, 2019(June), p. 2902-2909. ISSN 1803-1269. [Detail]

FUGLÍČEK, Ladislav. Increase of production productivity using the combined machining in one clamping. MM Science Journal. Praha: MM Publishing, 2019, 2019(October), p. 2952-2956. ISSN 1803-1269. [Detail]

MĚSÍČEK, Jakub, Marek PAGÁČ, Jana PETRŮ, Petr NOVÁK, Jiří HAJNYŠ and Kristýna KUTIOVÁ. Topological optimization of the formula student bell crank. MM Science Journal. Praha: MM Publishing, 2019, 2019(October), p. 2964-2968. ISSN 1803-1269. [Detail]

DOSTÁL, Pavel, Marek SADÍLEK and Radek HRUBÝ. Machining accurate holes with required roughness. MM Science Journal. Praha: MM Publishing, 2019, 2019(October), p. 2969-2974. ISSN 1803-1269. [Detail]

DORDA, Michal, Dušan TEICHMANN and Vojtěch GRAF. Optimisation of service capacity based on queueing theory. MM Science Journal. Praha: MM Publishing, 2019, 2019(October), p. 2975-2981. ISSN 1803-1269. [Detail]

HAJNYŠ, Jiří, Marek PAGÁČ, Kotera ONDŘEJ, Jana PETRŮ and Scholz SEBASTIAN. Influence of basic process parameters on mechanical and internal properties of 316l steel in slm process for renishaw AM400. MM Science Journal. MM Publishing, 2019, p. 2790-2794. ISSN 1803-1269. [Detail]

RUSZ, Stanislav, Ondřej HILŠER, Vladislav OCHODEK, Radek ČADA, Jiří ŠVEC and Pavel SZKANDERA. Influence of SPD Process on Low-Carbon Steel Mechanical Properties. MM Science Journal. MM Publishing, 2019, 12(2), p. 2910-2914. ISSN 1803-1269. [Detail]

BIALY, Witold and Jiří FRIES. COMPUTER SYSTEMS SUPPORTING THE MANAGEMENT OF MACHINES/EQUIPMENT IN HARD COAL MINES. CASE STUDY. Management Systems in Production Engineering. Varšava: De Gruyter, 2019, 27(3), p. 138-143. ISSN 2299-0461. [Detail]

VAŠINA, Martin, Lumír HRUŽÍK, Adam BUREČEK, Miroslav MAHDAL, Katarína MONKOVÁ and Peter Pavol MONKA. A study of factors influencing sound absorption properties of porous materials. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2019, 19(1), p. 156-160. ISSN 1213-2489. [Detail]

KREJČÍ, Lucie, Vladimíra SCHINDLEROVÁ, Michal BUČKO, Ivo HLAVATÝ and M. MICIAN. The Application of PFMEA for Roller Bearings Production. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2019, 19(3), p. 439-445. ISSN 1213-2489. [Detail]

MODROVSKÝ, Radek. Optimization of Production Flow through the CRAFT Method. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2019, 2019(1), p. 114-117. ISSN 1213-2489. [Detail]

ŽARNOVSKÝ, J., I. KOVÁČ, R. MIKUŠ, Jiří FRIES and M. MOŠAT'. Vibration diagnostics of CNC machining center spindle. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2019, 19(2), p. 350-356. ISSN 1213-2489. [Detail]

FUMFERA, Jaromír, Radim HALAMA, Radek PROCHÁZKA, Petr GÁL and Miroslav ŠPANIEL. Strain range dependent cyclic hardening of 08Ch18N10T stainless steel-experiments and simulations. Materials. Basilej: MDPI Open Access Publishing, 2019, 12(24), p. nestránkováno. ISSN 1996-1944. [Detail]

DJOKO, Jules K., Jonas KOKO and Radek KUČERA. Power law Stokes equations with threshold slip boundary conditions: Numerical methods and implementation. Mathematical Methods in the Applied Sciences. New York: Wiley, 2019, 42(5), p. 1488-1511. ISSN 0170-4214. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. The motion characteristics of the double-pendulum system with skew walls. Mathematical Methods in the Applied Sciences. New York: Wiley, 2019, 42(2), p. 475-487. ISBN 0-000-00000-0. [Detail]

MOLNÁR, Vieroslav, Gabriel FEDORKO, Stanislav HONUS, Miriam ANDREJIOVÁ, Anna GRINČOVÁ and Peter MICHALIK. Prediction of contact forces on idler rolls of a pipe conveyor idler housing for the needs of its online monitoring. Measurement. Elsevier, 2019, 139(_), p. 177-184. ISSN 0263-2241. [Detail]

CARACH, Jan, Sergej HLOCH, Jana PETRŮ, Miroslav MUELLER, Monika HROMASOVA, Akash NAG, Dominik CUHA, Petr HLAVACEK, Michal HATALA, Jiří KRATOCHVÍL and Alessandro RUGGIERO. Evaluation of physical phenomena and surface integrity during hydroabrasive disintegration of the rotating workpiece with feedback loop control. Measurement. San Diego: Elsevier, 2019, 134(February 2019), p. 586-594. ISSN 0263-2241. [Detail]

MAHDAL, Miroslav, Josef DOBEŠ and Milada KOZUBKOVÁ. Measurement of aerodynamic and acoustic quantities describing flow around a body placed in a wind tunnel. Measurement Science Review. Varšava2019, 19(1), p. 20-28. ISSN 1335-8871. [Detail]

FOLTÝNEK, Petr, Marek BABIUCH and Pavel ŠURÁNEK. Measurement and data processing from Internet of Things modules by dual-core application using ESP32 board. Measurement and Control. Londýn: SAGE Publications Ltd, 2019, 52(7-8), p. 970-984. ISSN 0020-2940. [Detail]

POLZER, Stanislav, A. POLIŠENSKÁ, K. NOVÁK and J. BURŠA. Moderate thickness of lipid core in shoulder region of atherosclerotic plaque determines vulnerable plaque - A parametric study. Medical Engineering and Physics. San Diego: Elsevier, 2019, 69(červenec), p. 140-146. ISSN 1350-4533. [Detail]

HALAMA, Radim, Jaromír FUMFERA, Petr GÁL, Tadbhagya KUMAR and Alexandros MARKOPOULOS. Modeling the Strain-Range Dependent Cyclic Hardening of SS304 and 08Ch18N10T Stainless Steel with a Memory Surface. Metals. BASEL: MDPI Open Access Publishing, 2019, 9(8), p. nestránkováno. ISSN 2075-4701. [Detail]

MONKOVA, Katarina, Peter Pavol MONKA, Adriana SEKERAKOVA, Lumír HRUŽÍK, Adam BUREČEK and Marek URBAN. Comparative Study of Chip Formation in Orthogonal and Oblique Slow-Rate Machining of EN 16MnCr5 Steel. Metals. Basilej: MDPI Open Access Publishing, 2019, 9(6), p. nestránkováno. ISSN 2075-4701. [Detail]

KOZÁK, Jindřich, Lucie KREJČÍ, Ivo HLAVATÝ, Ivan SAMARDŽIČ and Robert ČEP. AN ANALYSIS OF STRUCTURES OCCURRING IN WELD DEPOSIT OF STEEL S235JR N WITH TUNGSTEN CARBIDE PARTICLES AND MARTENSITIC MATRIX. Metalurgija. Hrvatsko metalurško društvo (HMD), 2019, 58(3-4), p. 235-238. ISSN 0543-5846. [Detail]

VLČEK, Jaroslav, Jaromír PIŠTORA and Michal LESŇÁK. Design of Plasmonic-Waveguiding Structures for Sensor Applications. NANOMATERIALS. BASEL: MDPI, 2019, 9(9), p. nestránkováno. ISSN 2079-4991. [Detail]

OTIPKA, Petr and Jaroslav VLČEK. Shape dependent EMA model of nanostructured anisotropic materials. Nanomaterials. Basilej: MDPI Open Access Publishing, 2019, 9(10), p. nestránkováno. ISSN 2079-4991. [Detail]

LAPCIK, Lubomir, Martin VAŠINA, Barbora LAPCIKOVA, David HUI, Eva OTYEPKOVA, Richard W GREENWOOD, Kristian E WATERS and Jakub VLCEK. Materials characterization of advanced fillers for composites engineering applications. Nanotechnology Reviews. Berlín: Walter de Gruyter GmbH, 2019, 8(1), p. 503-512. ISSN 2191-9089. [Detail]

VÝTISK, Jan, Vladimír KOČÍ, Stanislav HONUS and Mojmír VRTEK. Current options in the life cycle assessment of additive manufacturing products. Open Engineering. Varšava: De Gruyter, 2019, 9(1), p. 674-682. ISSN 2391-5439. [Detail]

HRABOVSKÝ, Leopold and David DLUHOŠ. Calibration of Transducers and of a Coil Compression Spring Constant on the Testing Equipment Simulating the Process of a Pallet Positioning in a Rack Cell. Open Engineering. De Gruyter, 2019, 2019,9(9), p. 631-640. ISSN 2391-5439. [Detail]

PETRUŠ, Michal, Peter MICHALÍK, Luboslav STRAKA, Leopold HRABOVSKÝ, Josef MACEJ, Peter TIRPAK and Jozef JUSKO. The evaluation of the production of the shaped part using the workshop programming method on the two-spindle multi-axis CTX alpha 500 lathe. Open Engineering. De Gruyter, 2019, 2020(1), p. 660-667. ISSN 2391-5439. [Detail]

ŠMÍDA, Zdeněk, Kamil KOLARČÍK and Stanislav HONUS. Ideal mathematical model of shock compression and shock expansion. Open Engineering. De Gruyter, 2019, 2019(9), p. 683-696. ISSN 2391-5439. [Detail]

HLUBINA, Petr, Milena LUŇÁČKOVÁ and Dalibor CIPRIAN. Phase sensitive measurement of the wavelength dependence of the complex permittivity of a thin gold film using surface plasmon resonance. Optical Materials Express. The Optical Society, 2019, 9(3), p. 992-1001. ISSN 2159-3930. [Detail]

HRABOVSKÝ, Leopold. Zařízení k určení součinitele adheze kuželového kola. Perners Contact. Univerzita Pardubice, 2019, XIX 2019(1), p. 65-73. ISSN 1801-674X. [Detail]

TUN, Maw Maw, Dagmar JUCHELKOVÁ, Myo Min WIN, Aung Myat THU and Tomáš PUCHOR. Biomass Energy: An Overview of Biomass Sources, Energy Potential, and Management in Southeast Asian Countries. Resources-Basel. MDPI Open Access Publishing, 2019, 8(2), p. 1-19. ISSN 2079-9276. [Detail]

TUN, Maw Maw and Dagmar JUCHELKOVÁ. Biomass Sources and Energy Potential for Energy Sector in Myanmar: An Outlook. Resources-Basel. MDPI Open Access Publishing, 2019, 8(2), p. 1-20. ISSN 2079-9276. [Detail]

BUDZAN, Sebastian, Dariusz BUCHCZIK, Marek PAWELCZYK and Jiří TŮMA. Combining Segmentation and Edge Detection for Efficient Ore Grain Detection in an Electromagnetic Mill Classification System. SENSORS. BASEL: MDPI, 2019, 19(8), p. nestránkováno. ISSN 1424-8220. [Detail]

KUĽKA, Jozef, Martin MANTIČ, Melichar KOPAS, Eva FALTINOVÁ and Leopold HRABOVSKÝ. Simulation-expertise analysis of ropes used in the horizontal belaying system. Scientific Journal of Silesian University of Technology. Series Transport. Silesian University of Technology, 2019, 103/2019(103), p. 53-67. ISSN 0209-3324. [Detail]

HRABEC, Ladislav, Michaela HRABCOVÁ and Petr CHYTKA. Elektromobilita - klady, zápory a dopady pro majitele vozidel a práci autoservisů. Spravodaj ATD SR. Asociácia technických diagnostikov SR, 2019, 16(2), p. 2 - 12. ISSN 1337-8252. [Detail]

KOUBOVÁ, Lenka, Petr JANAS, Alexandros MARKOPOULOS and Martin KREJSA. Nonlinear analyses of steel beams and arches using virtual unit moments and effective rigidity. Steel and Composite Structures. Tedžon: Techno Press, 2019, 33(5), p. 755-765. ISSN 1229-9367. [Detail]

BĚLÍK, Radomír and Martin FUSEK. Loading and Unloading Curve of Foam Material Based on Compression Test. Strojnícky časopis. Bratislava: Slovenská akademie věd, 2019, 69(3), p. 3-8. ISSN 0039-2472. [Detail]

FERFECKI, Petr, Filip ZAORAL and Jaroslav ZAPOMĚL. Using Floquet Theory in the Procedure for Investigation of the Motion Stability of a Rotor System Exhibiting Parametric and Self-Excited Vibration. Strojnícky časopis. Bratislava: Slovenská akademie věd, 2019, 69(3), p. 33-42. ISSN 0039-2472. [Detail]

HALO, Tomáš, Karel FRYDRÝŠEK, Daniel ČEPICA, Michal KOPELENT, František FOJTÍK and Leopold PLEVA. Biomechanics - Experimental Determination of Critical Force Needed for Cannula to be Torn out. Strojnícky časopis. Bratislava: Slovenská akademie věd, 2019, 69(3), p. 51-60. ISSN 0039-2472. [Detail]

FRYDRÝŠEK, Karel, Daniel ČEPICA and Tomáš HALO. Stochastic loading of a sitting human. Strojnícky časopis. Bratislava: Slovenská akademie věd, 2019, 69(2), p. 97-110. ISSN 0039-2472. [Detail]

HORÁK, Jiří, Jan TESLA, David FOJTÍK and Vit VOZENILEK. Modelling Public Transport Accessibility with Monte Carlo Stochastic Simulations: A Case Study of Ostrava. Sustainability. BASEL: MDPI Open Access Publishing, 2019, 11(24), p. nestránkováno. ISSN 2071-1050. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Aditivace maziv pod tlakem nových exhalačních předpisů - stručný rozbor aktuálního stavu výzkumu a možností aplikace. Technická diagnostika. Asociace technických diagnostiků ČR, 2019, 28(z1), p. 71-81. ISSN 1210-311X. [Detail]

MALOTOVÁ, Šárka, Robert ČEP, Tomáš ZLÁMAL, Petr MOHYLA, Andrej CZAN, Aco ANTIC, Igor BUDAK and Lobontiu MIRCEA. Evaluation of Residual Stresses after Irregular Interrupted Machining. Tehnički vjesnik – Technical Gazette. University of Osijek, 2019, 25(4), p. 1009-1013. ISSN 1330-3651. [Detail]

KRAMOLIŠ, Petr and Mojmír VRTEK. Specifika solární soustavy s vodou. Vytápění, větrání, instalace. Praha: Společnost pro techniku prostředí, 2019, 28(2), p. 78-81. ISSN 1210-1389. [Detail]

HIRMAN, David, Marek HERČZÍK and Jaromír MATĚJŮ. Kontinuální měřiče prašnosti v zásobnících uhlí. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2019, 3(10/2019), p. 33 - 39. ISSN 1213-1660. [Detail]

HORYL, Petr, Richard ŠŇUPÁREK, Pavel MARŠÁLEK, Zdeněk PORUBA and Krzysztof PACZESNIOWSKI. Parametric Studies of Total Load-Bearing Capacity of Steel Arch Supports. Acta Montanistica Slovaca. Košice: Technická univerzita v Košiciach, 2018, 24(3), p. 213-222. ISSN 1335-1788. [Detail]

ČEP, Robert, Šárka MALOTOVÁ, Jiří LICHOVNÍK, Michal HATALA and Legutko STANISLAW. The influence of cutting conditions on the selected parameters of the surface integrity. Acta Polytechnica. České vysoké učení technické v Praze, 2018, 58(6), p. 334-338. ISSN 1210-2709. [Detail]

JOLDES, Grand Roman, Christopher NOBLE, Stanislav POLZER, Zeike A. TAYLOR, Adam WITTEK and Karol MILLER. A simple method of incorporating the effect of the Uniform Stress Hypothesis in arterial wall stress computations. Acta of Bioengineering and Biomechanics. Wroclaw: Wroclaw University of Technology, 2018, 20(3), p. 59-67. ISSN 1509-409X. [Detail]

IVÁNEK, Lubomír, Petr ORSÁG, Vladimír MOSTÝN and Karel SCHEE. Track occupancy detection using ratio of open-circuit impedance to short-circuit impedance. Advances in Electrical and Electronic Engineering. VŠB - Technical University of Ostrava, 2018, 16(2), p. 211-217. ISSN 1336-1376. [Detail]

KOCMAN, Stanislav, Petr ORSÁG and Pavel PEČÍNKA. Simulation of selected induction motor operating conditions using COMSOL software. Advances in Electrical and Electronic Engineering. VŠB - Technical University of Ostrava, 2018, 16(3), p. 288-296. ISSN 1336-1376. [Detail]

STANCEKOVA, Dana, Anna RUDAWSKA, Albert KULLA, Jana PETRŮ and Jozef HOLUBJAK. A CHOICE OF THE OPTIMUM CUTTING RANGES FOR CUTTING NOZZLES A-SD FOR SELECTION OF METALLURGICAL MATERIAL. Advances in science and technology-research journal. Lublin: Lublin University of Technology, 2018, 12(3), p. 106-113. ISSN 2299-8624. [Detail]

RUDAWSKA, Anna, Mateusz MALCZARSKI, Dana STANCEKOVA, Magd Abdel WAHAB and Vladimíra SCHINDLEROVÁ. MECHANICAL PROPERTIES OF HAND-MAKING POLYESTER COMPOSITES. Advances in science and technology-research journal. Lublin: Lublin University of Technology, 2018, 12(2), p. 112-120. ISSN 2299-8624. [Detail]

KRATOCHVÍL, Jiří, Marek SADÍLEK, Václav MUSIL, Marek PAGÁČ and Dana STANCEKOVA. THE EFFECTIVENESS OF STRATEGIES PRINTING PRINTER EASY 3D MAKER. Advances in science and technology-research journal. Lublin: Lublin University of Technology, 2018, 12(2), p. 197-205. ISSN 2299-8624. [Detail]

PETRŮ, Jana, Tomáš ZLÁMAL, František ŠPALEK and Robert ČEP. SURFACE MICROHARDENING STUDIES ON STEELS AFTER HIGH FEED MILLING. Advances in science and technology-research journal. Lublin: Lublin University of Technology, 2018, 12(2), p. 222-230. ISSN 2299-8624. [Detail]

ŽUROVEC, David, Jan NEČAS, Jan DIVIŠ, Jakub HLOSTA, Jiří ZEGZULKA and Kateřina URBANOVÁ. Optimization of dosing tank emptying using spiral vibration. Advances in science and technology-research journal. Lublin University of Technology, 2018, 12(3), p. 143-149. ISSN 2299-8624. [Detail]

HRABOVSKÝ, Leopold and Marinko MASLARIĆ. Device Designed for Detection and Setting the Required Tensile Force in Ropes. Advances in science and technology-research journal. Lublin University of Technology, 2018, 1/2018(2), p. 200-206. ISSN 2299-8624. [Detail]

MICHALIK, Peter, Leopold HRABOVSKÝ, Jozef DOBRÁNSKY and Michal PETRUŠ. Assessment of the Manufacturing Possibility of Thin-Walled Robotic Portals for Conveyor Worklace. Advances in science and technology-research journal. Lublin University of Technology, 2018, 1/2018(12), p. 338–345. ISSN 2299-8624. [Detail]

NOVÁK, Petr, Tomáš KOT, Ján BABJAK, Zdeněk KONEČNÝ, Wojciech MOCZULSKI and Angel RODRIGUEZ LOPEZ. Implementation of Explosion Safety Regulations in Design of a Mobile Robot for Coal Mines. Applied Sciences. MDPI Open Access Publishing, 2018, 8(11), p. 1-16. ISSN 2076-3417. [Detail]

MICIAN, M., R. KONAR, Ivo HLAVATÝ, J. WINCZEK and M. GUCWA. The Repair of Foundry Defects in Steel Castings Using Welding Technology. Archives of Foundry Engineering. De Gruyter, 2018, 18(2), p. 177-180. ISSN 1897-3310. [Detail]

DUTKIEWICZ, Jan, Stanislav RUSZ, Dariusz KUC, Ondřej HILŠER, Piotr BOBROWSKI and Bogusz KANIA. Microstructure and texture changes of MgLiAl alloys composed of α or α + β phases after twist channel angular pressing (TCAP). Archives of Metallurgy and Materials. Polish Academy of Sciences, 2018, 63(4), p. 1827-1835. ISSN 1733-3490. [Detail]

KOWALCZYK, Karolina, Magdalena JABLOŃSKA, Stanislav RUSZ and Grzegorz JUNAK. Influence of recrystallization annealing on the properties and structure of low-carbon ferritic steel if. Archives of Metallurgy and Materials. Polish Academy of Sciences, 2018, 63(4), p. 1957-1961. ISSN 1733-3490. [Detail]

KOWALCZYK, Karolina, Magdalena JABLOŃSKA, Stanislav RUSZ and Iwona BEDNARCZYK. Influence of the Drece process of severe plastic deformation on the mechanical properties of the ultra-low carbon interstitial free steel. Archives of Metallurgy and Materials. Polish Academy of Sciences, 2018, 63(4), p. 2095-2100. ISSN 1733-3490. [Detail]

VAVRA, P., Ladislav KÁRNÍK, M. SKROBANKOVA, J. JURCIKOVA, P. IHNAT, P. ZONCA, M. PETEJA, A. EL-GENDI and S. CZUDEK. Advancement in liver laparoscopic resection - Development of a new surgical device. Brazilian Journal of Medical and Biological Research. Associacao Brasileira de Divulgacao Cientifica, 2018, 51(E6062), p. 1/1 1/ 4. ISSN 0100-879X. [Detail]

LAPČÍK, Lubomír, David MAŇAS, Barbora LAPČÍKOVÁ, Martin VAŠINA, Michal STANĚK, Klára ČÉPE, Jakub VLČEK, Kristian E. WATERS, Richard W. GREENWOOD and Neil A. ROWSON. Effect of filler particle shape on plastic-elastic mechanical behavior of high density poly(ethylene)/mica and poly(ethylene)/wollastonite composites. Composites Part B: Engineering. Elsevier, 2018, 141(May 15), p. 92-99. ISSN 1359-8368. [Detail]

KLOUDA, Vlastimil, Vlastimil MONI, Michal ŘEHOŘ, Jan BLATA and František HELEBRANT. The evaluation of risk degree for the proces of a brown coal spontaneous ignition on dumps with using of modern numeric methods. Czech-Polish Conference Modern Mathematical Methods in Engineering 2017 : proceedings. P.A. NOVA S.A., 2018, 26(2), p. 71-75. ISSN 2299-0461. [Detail]

TUN, Maw Maw, Dagmar JUCHELKOVÁ, Helena RACLAVSKÁ and Veronika SASSMANOVÁ. Utilization of Biodegradable Wastes as a Clean Energy Source in the Developing Countries: A Case Study in Myanmar. Energies. MDPI Open Access Publishing, 2018, 11(11), p. 1-20. ISSN 1996-1073. [Detail]

DOSTÁL, Michal, Jan SUCHANEK, Václav VÁLEK, Zuzana BLATOŇOVÁ, Václav NEVRLÝ, Petr BITALA, Pavel KUBAT and Zdenek ZELINGER. Cantilever-Enhanced Photoacoustic Detection and Infrared Spectroscopy of Trace Species Produced by Biomass Burning. Energy & Fuels. American Chemical Society, 2018, 32(10), p. 10163-10168. ISSN 0887-0624. [Detail]

TUN, Maw Maw. An Overview of Renewable Energy Sources and Their Energy Potential for Sustainable Development in Myanmar. European Journal of Sustainable Development Research. Lectito, 2018, p. nerelevantní. ISSN 0000-0000. [Detail]

HONUS, Stanislav, Shogo KUMAGAI, Gabriel FEDORKO, Vieroslav MOLNÁR and Toshiaki YOSHIOKA. Pyrolysis gases produced from individual and mixed PE, PP, PS, PVC, and PET-Part I: Production and physical properties. Fuel. Elsevier, 2018, 221(()), p. 346-360. ISSN 0016-2361. [Detail]

HONUS, Stanislav, Shogo KUMAGAI, Vieroslav MOLNÁR, Gabriel FEDORKO and Toshiaki YOSHIOKA. Pyrolysis gases produced from individual and mixed PE, PP, PS, PVC, and PET-Part II: Fuel characteristics. Fuel. Elsevier, 2018, 221(()), p. 361-373. ISSN 0016-2361. [Detail]

KRZYŻYŃSKA, R., N.D. HUTSON, Y. ZHAO, Zbyszek SZELIGA and Pawel REGUCKI. Mercury removal and its fate in oxidant enhanced wet flue gas desulphurization slurry. Fuel. Elsevier, 2018, Volume 211(1 January 2018), p. 876-882. ISSN 0016-2361. [Detail]

LANDRYOVÁ, Lenka. Simulation Modelling of Integrated Systems in Marine Technology. IFAC-PapersOnLine. Volume 51. Elsevier Science, 2018, 51(11), p. 490-495. ISSN 2405-8963. [Detail]

MATUŠKOVÁ, Simona, Adam PAWLICZEK and Michal ČERVINKA. Management and Marketing in Tourism - Prospective Development of the Leos Janacek Airport Ostrava. INZYNIERIA MINERALNA-JOURNAL OF THE POLISH MINERAL ENGINEERING SOCIETY. Krakow: POLISH MINERAL ENG SOC, 2018, 42(2), p. 207-212. ISSN 1640-4920. [Detail]

MICHALSKI, Jakub, Jakub TILL, Jana PETRŮ, Stanislav RUSZ, Ondřej HILŠER and Jiřina VONTOROVÁ. AZ31 magnesium alloy subjected to severe plastic deformation at different temperatures: Microstructure and hardness. IOP Conference Series: Materials Science and Engineering. Volume 385. Institute of Physics, 2018, 461(1), p. 1-6. ISSN 1757-8981. [Detail]

MOSTÝN, Vladimír, Václav KRYS, Tomáš KOT, Zdenko BOBOVSKÝ and Petr NOVÁK. The synthesis of a segmented stair-climbing wheel. International Journal of Advanced Robotic Systems. Thousand Oaks: SAGE Publications Inc, 2018, 15(1), p. nestránkováno. ISSN 1729-8814. [Detail]

KOT, Tomáš and Petr NOVÁK. Application of Virtual Reality in Teleoperation of the Military Mobile Robotic System TAROS. International Journal of Advanced Robotic Systems. SAGE Publications Inc, 2018, 15(1), p. 1-6. ISSN 1729-8814. [Detail]

BOBOVSKÝ, Zdenko, Václav KRYS and Vladimír MOSTÝN. Kinect V2 Infrared Images Correction. International Journal of Advanced Robotic Systems. SAGE Publications Inc, 2018, 15(1), p. 1-8. ISSN 1729-8814. [Detail]

MACHÁČKOVÁ, Adéla, Radim KOCICH, Marian BOJKO, Lenka KUNČICKÁ and Krzysztof POLKO. Numerical and experimental investigation of flue gases heat recovery via condensing heat exchanger. International Journal of Heat and Mass Transfer. PERGAMON-ELSEVIER SCIENCE LTD, 2018, 124(September), p. 1321-1333. ISSN 0017-9310. [Detail]

TUN, Maw Maw and Dagmar JUCHELKOVÁ. Evaluation of Biodegradable Waste Quality by Drying for exploring the Possibilities of a Potential Renewable Energy Source in Yangon City, Myanmar. International Journal of Renewable Energy Research. International Journal of Renewable Energy Research, 2018, 8(4), p. 2025-2034. ISSN 1309-0127. [Detail]

KANTOR, Pavel, Barbora ŠVÉDOVÁ, Jarmila DROZDOVÁ, Helena RACLAVSKÁ, Marek KUCBEL and Konstantin RACLAVSKÝ. Comparison of Enrichment Factors for Heavy Metals in Urban Street Dust and Air Aerosols. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2018, 41(1), p. 209-216. ISSN 1640-4920. [Detail]

RŮŽIČKOVÁ, Jana, Michal ŠAFÁŘ, Helena RACLAVSKÁ, Hana ŠKROBÁNKOVÁ and Konstantin RACLAVSKÝ. Organic Compounds Released by Thermal Organic Compounds Released by Thermal Decomposition of Wood Composite. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2018, 41(1), p. 87-92. ISSN 1640-4920. [Detail]

RACLAVSKÁ, Helena, Jana RŮŽIČKOVÁ, Hana ŠKROBÁNKOVÁ, Silvie KOVAL, Marek KUCBEL, Konstantin RACLAVSKÝ, Barbora ŠVÉDOVÁ, Petr PAVLÍK and Dagmar JUCHELKOVÁ. Possibilities of the utilization of char from the pyrolysis of tetrapak. Journal of Environmental Management. Elsevier, 2018, 219(4), p. 231-238. ISSN 0301-4797. [Detail]

RŮŽIČKOVÁ, Jana, Helena RACLAVSKÁ, Marek KUCBEL, Konstantin RACLAVSKÝ, Barbora ŠVÉDOVÁ and Dagmar JUCHELKOVÁ. The possibilities to identify combusted fuel based on an analysis of ash from local heating. Journal of Environmental Management. Elsevier, 2018, 219(August 2018), p. 269-276. ISSN 0301-4797. [Detail]

TUN, Maw Maw and Dagmar JUCHELKOVÁ. Assessment of solid waste generation and greenhouse gas emission potential in Yangon city, Myanmar. Journal of Material Cycles and Waste Management. Springer-Tokyo, 2018, 20(3), p. 1397-1408. ISSN 1438-4957. [Detail]

FRYDRÝŠEK, Karel, Milan ŠÍR and Leopold PLEVA. Strength Analyses of Screws for Femoral Neck Fractures. Journal of Medical and Biological Engineering. Springer Heidelberg, 2018, 38(5), p. 816-834. ISSN 1609-0985. [Detail]

ZAPOMĚL, Jaroslav and Petr FERFECKI. The Oscillation Attenuation of an Accelerating Jeffcott Rotor Damped by Magnetorheological Dampers Affected by the Delayed Yielding Phenomenon in the Lubricating Oil. Journal of Vibration and Acoustics, Transactions of the ASME. New York: American Society of Mechanical Engineers, 2018, 140(1), p. nestránkováno. ISSN 1048-9002. [Detail]

OLIVKOVÁ, Ivana. Methodology for Assessment of Electronic Payment Systems in Transport Using AHP Method. Lecture Notes in Networks and Systems. Volume 36. Springer, 2018, 36(24 January 2018), p. 290-299. ISSN 2367-3370. [Detail]

OCZKA, David, Jan GREPL, Vladimír KAŠÍK, Marek PENHAKER, Lukáš KNYBEL and Jakub CVEK. Patient's respiratory curve synchronization by visual feedback application. Lékař a technika. Praha: Česká lékařská společnost J.E. Purkyně, 2018, 48(1), p. 17-21. ISSN 0301-5491. [Detail]

DVOŘÁK, Lukáš and Kamil FOJTÁŠEK. Measuring of rotary air motors characteristics. MM Science Journal. Praha: MM Publishing, 2018, 2018(October), p. 2477-2480. ISSN 1803-1269. [Detail]

MRKVICA, Ivan, Anton PANDA, Ema NOVÁKOVÁ-MARCINČINOVÁ, Ludmila NOVÁKOVÁ-MARCINČINOVÁ and Tadeusz ZABOROWSKI. PRODUCTION BY FDM METHOD RP TECHNOLOGY FROM PLA ECO-MATERIALS EXTRUDED HORIZONTALLY IN LENGTH. MM Science Journal. MM Publishing, 2018, 11(1), p. 2179-2182. ISSN 1803-1269. [Detail]

FUGLÍČEK, Ladislav. Production enhancement through using a continuous system of winding electric machines. MM Science Journal. MM Publishing, 2018, 2018(June), p. 2358-2362. ISSN 1803-1269. [Detail]

MUSIL, Václav, Marek SADÍLEK, Robert ČEP and Šárka MALOTOVÁ. The influence of cutting parameters on surface quality and nitrogen consumption during laser cutting. MM Science Journal. MM Publishing, 2018, 1(June 2018), p. 2363-2366. ISSN 1803-1269. [Detail]

ČEP, Robert, Šárka MALOTOVÁ, Karel KOUŘIL, Lenka ČEPOVÁ, Ladislav KYNCL, Michal ŠAJGALÍK and Tatiana CZÁNOVÁ. Evaluation of residual stress in conditions of irregular interrupted cut. MM Science Journal. MM Publishing, 2018, 2018(October), p. 2436-2440. ISSN 1803-1269. [Detail]

TŮMA, Jiří, Milada KOZUBKOVÁ, Miroslav PAWLENKA, Miroslav MAHDAL and Jiří ŠIMEK. Theoretical and Experimental Analysis of the Bearing Journal Motion Due To Fluid Force Caused By the Oil Film. MM Science Journal. MM Publishing, 2018, 2018(October), p. 2466-2472. ISSN 1803-1269. [Detail]

KOZUBKOVÁ, Milada, Jana JABLONSKÁ, Marian BOJKO and Patrik MARCALÍK. OPTIMIZATION METHOD FOR DESIGNING OF HYDRAULIC ELEMENTS. MM Science Journal. MM Publishing, 2018, 2018(October), p. 2484-2489. ISSN 1803-1269. [Detail]

NOSKIEVIČ, Petr and Martin BŘEZINA. Experimental testing of power assisted steering. MM Science Journal. MM Publishing, 2018, 2018(October), p. 2494-2497. ISSN 1803-1269. [Detail]

SUDER, Jiří, Milan MIHOLA, Zdeněk KONEČNÝ, Tomáš KOT and Robert PASTOR. Modifications to the Effector for Measurement of Gripping Force. MM Science Journal. MM Publishing, 2018, p. 2606-2610. ISSN 1803-1269. [Detail]

LIPINA, Jan, Václav KRYS and Pavel MEC. SIMULATION MODEL OF POLYCARBONATE MATERIAL FOR ADDITIVE TECHNOLOGY FDM. MM Science Journal. MM Publishing, 2018, 1(1), p. 2611-2615. ISSN 1803-1269. [Detail]

PASTOR, Robert, Aleš VYSOCKÝ, Petr ŠIROKÝ, Zdeněk KONEČNÝ and Ladislav KÁRNÍK. Use of Different Simulation Methods for Design of Experimental Rover. MM Science Journal. MM Publishing, 2018, p. 2616-2620. ISSN 1803-1269. [Detail]

KOVÁŘ, Ladislav, Pavel NOVÁK and Jaroslav MELECKÝ. LANCE DESIGN FOR SCRAP MELTING AGGREGATES. MM Science Journal. MM Publishing, 2018, p. null. ISSN 1803-1269. [Detail]

SADÍLEK, Marek, Lukáš KOUSAL, N. NÁPRSTKOVÁ, Tomáš SZOTKOWSKI and Jiří HAJNYŠ. The analysis of accuracy of machined surfaces and surfaces roughness after 3axis and 5axis milling. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2018, 18(6), p. 1015-1022. ISSN 1213-2489. [Detail]

BOTKO, F., M. HATALA, Z. MITALOVA, Robert ČEP, M. RIMAR, A. BERNAT and J. VYBOSTEK. Qualitative evaluation of machined surface of aluminum alloy AlCu4Mg1 depend on feed rate. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2018, 18(2), p. 201-207. ISSN 1213-2489. [Detail]

MĚSÍČEK, Jakub, Michal RICHTÁŘ, Jana PETRŮ, Marek PAGÁČ and Kristýna KUTIOVÁ. Complex view to racing car upright design and manufacturing. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2018, 18(3), p. 449-456. ISSN 1213-2489. [Detail]

MALOTOVÁ, Šárka, Robert ČEP, Jiří KRATOCHVÍL, Michal ŠAJGALÍK and Andrej CZÁN. Dependence of the resistance of the integrated layers on the wear of ceramic cutting tool. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2018, 2018(3), p. 444-448. ISSN 1213-2489. [Detail]

VAŠINA, Martin, Marek PÖSCHL and Petr ZÁDRAPA. A study of significant factors affecting viscoelastic damping properties of polymer materials. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2018, 18(3), p. 523-529. ISSN 1213-2489. [Detail]

MRKVICA, Ivan, František ŠPALEK and Tomáš SZOTKOWSKI. Influence of Cutting Tool Wear when Milling Inconel 718 on Resulting Roughness. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2018, 18(3), p. 547-461. ISSN 1213-2489. [Detail]

PAGÁČ, Marek, Jiří HAJNYŠ, Jana PETRŮ and Tomáš ZLÁMAL. Comparison of hardness of surface 316L stainless steel made by additive technology and cold rolling. Materials Science Forum. Trans Tech Publications, 2018, 919(2017-11-07), p. 84-91. ISSN 1662-9752. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. Dynamical properties of a nonautonomous double pendulum model. Mathematical Methods in the Applied Sciences. New York: Wiley, 2018, 41(17), p. 7106-7114. ISBN 0-000-00000-0. [Detail]

HASLINGER, Jaroslav, Radek KUČERA, Václav ŠÁTEK and T. SASSI. Stokes system with solution-dependent threshold slip boundary conditions: Analysis, approximation and implementation. Mathematics and Mechanics of Solids. Londýn: SAGE Publications Ltd, 2018, 23(3), p. 294-307. ISSN 1081-2865. [Detail]

HASLINGER, Jaroslav, Vladimír JANOVSKÝ, Radek KUČERA and Kristina MOTYČKOVÁ. Nonsmooth continuation of parameter dependent static contact problems with Coulomb friction. Mathematics and computers in simulation. Amsterdam: Elsevier Science, 2018, 145(March 2018), p. 62-78. ISSN 0378-4754. [Detail]

KUČERA, Radek, Jaroslav HASLINGER, Václav ŠÁTEK and Marta JAROŠOVÁ. Efficient methods for solving the Stokes problem with slip boundary conditions. Mathematics and computers in simulation. Amsterdam: Elsevier Science BV, 2018, 145(March 2018), p. 114-124. ISSN 0378-4754. [Detail]

SRIVASTAVA, Madhulika, Sergej HLOCH, Lucie KREJČÍ, Somnath CHATTOPADHYAYA, Amit Rai DIXIT and Josef FOLDYNA. Residual stress and surface properties of stainless steel welded joints induced by ultrasonic pulsed water jet peening. Measurement. Elsevier, 2018, 127(OCT 2018), p. 453-462. ISSN 0263-2241. [Detail]

ČEPOVÁ, Lenka, Andrea KOVÁČIKOVÁ, Robert ČEP, Pavel KLAPUT and Ondřej MIZERA. Measurement System Analyses - Gauge Repeatability and Reproducibility Methods. Measurement Science Review. De Gruyter, 2018, 18(1), p. 20-27. ISSN 1335-8871. [Detail]

BERNATÍKOVÁ, Šárka, Hana TOMÁŠKOVÁ, Marek BUŽGA, Zdeněk JIRÁK, Petr NOVÁK, Ján BABJAK, Tomáš KOT, Václav KRYS and Ladislav JÁNOŠÍK. VERIFICATION OF ELECTRONIC DEVICE TECHNOLOGY FOR MEASUREMENT AND EVALUATION OF THERMAL EXPOSURE OF FIRE FIGHTERS AND MEMBERS OF RESCUE TEAMS. Medycyna Pracy. Lodž: Nofer Institute of Occupational Medicine, 2018, 69(1), p. 1-11. ISSN 0465-5893. [Detail]

ZEGZULKA, Jiří, Daniel GELNAR, Lucie JEZERSKÁ, Alvaro RAMIREZ-GOMEZ, Jan NEČAS and Jiří ROZBROJ. Internal Friction Angle of Metal Powder. Metals. MDPI Open Access Publishing, 2018, 8(255), p. 1-12. ISSN 2075-4701. [Detail]

HILŠER, Ondřej, Stanislav RUSZ, Pavel SZKANDERA, Lubomír ČÍŽEK, Martin KRAUS, Jan DŽUGAN and Wojciech MAZIARZ. Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation. Metals. MDPI Open Access Publishing, 2018, 8(10), p. 1-16. ISSN 2075-4701. [Detail]

DUTKIEWICZ, Jan, Piotr BOBROWSKI, Stanislav RUSZ, Ondřej HILŠER, Tomasz A. TANSKI, Wojciech BOREK, Marek LAGODA, Pawel OSTACHOWSKI, Pawel PALKA, Grzegorz BOCZKAL, Dariusz KUC and Tomasz MIKUSZEWSKI. Effect of Various SPD Techniques on Structure and Superplastic Deformation of Two Phase MgLiAl Alloy. Metals and Materials International. Soul: Korean Institute of Metals and Materials, 2018, 24(5), p. 1077-1089. ISSN 1598-9623. [Detail]

MOLNAR, Vieroslav, Gabriel FEDORKO, Stanislav HONUS, Lenka GIROVSKÁ and Jan LIZBETIN. Selection and allocation of a warehouse linked to reloading terminal and seaport. Nase More. University of Dubrovnik, 2018, 65(4), p. 169-173. ISSN 0469-6255. [Detail]

HRABOVSKÝ, Leopold. Měření tahových sil v lanech. Perners Contact. Univerzita Pardubice, 2018, XIII.(3), p. 33-46. ISSN 1801-674X. [Detail]

OTIPKA, Petr, Jaroslav VLČEK, Michal LESŇÁK and Jan SOBOTA. Design of MO-SPR sensor element with photonic crystal. Photonics and Nanostructures - Fundamentals and Applications. New York: Elsevier Science, 2018, 31(September 2018), p. 77-80. ISSN 1569-4410. [Detail]

PIŠTORA, Jaromír, Jaroslav VLČEK, Petr OTIPKA and Michal ČADA. Plasmonic nanostructures with waveguiding effect. Photonics and Nanostructures - Fundamentals and Applications. New York: Elsevier Science, 2018, 31(September 2018), p. 22-26. ISSN 1569-4410. [Detail]

BLEJCHAŘ, Tomáš, Ondřej ZAVILA, Zbyszek SZELIGA, Jana JABLONSKÁ, Jaroslav KONVIČKA, Paweł REGUCKI and Renata KRZYŻYŃSKA. CFD Model of SNCR with Shifting Effect of CO. Rocznik Ochrony Środowiska. Środkowo-Pomorskie towarzystwo naukowe ochrony środowiska, 2018, 2018(20), p. 109-122. ISSN 1506-218X. [Detail]

NĚMČEK, Miloš. REMARKS AND CORRECTIONS TO THE STANDARD ISO 6336. Scientific Journal of Silesian University of Technology. Series Transport. Silesian University of Technology, 2018, 99(1), p. 115-124. ISSN 0209-3324. [Detail]

RUSZ, Stanislav, Ondřej HILŠER, Stanislav TYLŠAR, Lubomír ČÍŽEK, Tomasz TAŃSKI and Wojciech MAZIARZ. The influence of severe plastic deformation process on structure and properties of AZ 31 alloy after selected heat treatment. Solid State Phenomena. Volume 258. Trans Tech Publications, 2018, 275(1), p. 134-146. ISSN 1012-0394. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Nové exhalační normy a jejich dopad na provoz motorových vozidel. Spravodaj ATD SR. Asociácia technických diagnostikov SR, 2018, 15(2), p. 8-17. ISSN 1337-8252. [Detail]

LIČKOVÁ, Dagmar, Radim HALAMA and Zdeněk PORUBA. Identification of fatigue constants by means of 3D method. Strojnícky časopis. Slovenská akademie věd, 2018, 66(2), p. 107-116. ISSN 0039-2472. [Detail]

TŮMA, Jiří, Pavel ŠURÁNEK and Stanislav ŽIARAN. All-Pass Filters in the Systems of Active Vibration Control of Weakly-Damped Systems. Strojnícky časopis. Slovenská akademie věd, 2018, 68(4), p. 65-74. ISSN 0039-2472. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Dopady nových exhalačních norem na konstrukci a provoz motorových vozidel - část 1: LSPI a superlubricita. Technická diagnostika. Asociace technických diagnostiků ČR, 2018, 27(z1), p. 47-58. ISSN 1210-311X. [Detail]

PFEIFER, Marcel Rolf. Rapid Prototyping Technologies for Manufacturing and Maintenance Activities. Technologické inžinierstvo. University of Žilina, 2018, 14(2/2017), p. 30-32. ISSN 1336-5967. [Detail]

MAJERIK, Jozef, Rozmarina DUBOVSKA, Jaroslav JAMBOR, Robert ČEP, Jiří KRATOCHVÍL and Karel KOURIL. Experimental Investigation into Wear and Tool Life of Milling Cutter PVD Coated Carbide Inserts While Armox 500 Steel Hard Milling. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2018, 25(6), p. 1603-1610. ISSN 1330-3651. [Detail]

MALOTOVÁ, Šárka, Robert ČEP, Tomáš ZLÁMAL, Petr MOHYLA, Andrej CZÁN, Aco ANTIC, Igor BUDAK and Lobontiu MIRCEA. Evaluation of Residual Stresses after Irregular Interrupted Machining. Tehnički vjesnik – Technical Gazette. University of Osijek, 2018, 25(4), p. 1009-1013. ISSN 1330-3651. [Detail]

HLAVATÝ, Ivo, Petra HÁJKOVÁ, Lucie KREJČÍ and Robert ČEP. Electric Resistance Welding of Austenitic and Galva nized Steel Sheets. Tehnički vjesnik – Technical Gazette. University of Osijek, 2018, 25(5), p. 1274-1277. ISSN 1330-3651. [Detail]

VAŠINA, Martin, Lumír HRUŽÍK and Adam BUREČEK. Energy and Dynamic Properties of Hydraulic Systems. Tehnički vjesnik – Technical Gazette. University of Osijek, 2018, 25(September), p. 382-390. ISSN 1330-3651. [Detail]

FRIES, Jiří and Tomáš HAPLA. Influence Affecting the Lifetime of Belt Conveyor's Drive Drums. Tehnički vjesnik – Technical Gazette. University of Osijek, 2018, 25(1), p. 7-14. ISSN 1330-3651. [Detail]

LEHOCKA, Dominika, Jiří KLICH, František BOTKO, Josef FOLDYNA, Sergej HLOCH, Jan KEPIC, K KOVAL', Lucie KREJČÍ and Zdeněk ŠTORKÁN. Pulsating water jet erosion effect on a brass flat solid surface. The international journal of advanced manufacturing technology. Springer, 2018, 97(1-4), p. 1099-1112. ISSN 0268-3768. [Detail]

CÁRACH, J., Sergej HLOCH, Jana PETRŮ, A. NAG, M. GOMBÁR and M HROMASOVÁ. Hydroabrasive disintegration of rotating Monel K-500 workpiece. The international journal of advanced manufacturing technology. Springer, 2018, 96(1-4), p. 981-1001. ISSN 0268-3768. [Detail]

VONTOROVÁ, Jiřina and Petr MOHYLA. Use of GDOES method for evaluation of the quality and thickness of hot dip galvanised coating. Transactions of the Institute of Metal Finishing. Philadelphia: Taylor & Francis, 2018, 96(6), p. 313-318. ISSN 0020-2967. [Detail]

SLADKÁ, Karla. Simulation of a Two Degrees of Freedom Controller with a Liquid Tank. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2018, 64(2), p. 35-40. ISSN 1210-0471. [Detail]

JUREK, Martin. Mathematical Models of 2D Plotter Components. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2018, 64(2), p. 9-16. ISSN 1210-0471. [Detail]

FRYDRYCH, Jan, Lucie JEZERSKÁ, David Patiño VILAS and Jiří ZEGZULKA. Biomass analysis applicable to energy purposes. Waste Forum. České ekologické manažerské centrum, 2018, 4(4), p. 452-459. ISSN 1804-0195. [Detail]

TUN, Maw Maw. Estimation of solid waste quality for thermal waste treatment in Yangon. Waste Management. PERGAMON-ELSEVIER SCIENCE LTD, 2018, 72(2), p. I-III. ISSN 0956-053X. [Detail]

DROZDOVÁ, Jarmila, Helena RACLAVSKÁ, Konstantin RACLAVSKÝ and Hana ŠKROBÁNKOVÁ. Heavy metals in domestic wastewater with respect to urban population in Ostrava, Czech Republic. Water and Environment Journal. Wiley, 2018, 33(1), p. 77-85. ISSN 1747-6585. [Detail]

JEZERSKÁ, Lucie, Jiří ZEGZULKA, Barbora PALKOVSKÁ, Radmila KUČEROVÁ and František ZÁDRAPA. Pelletization of invasive reynoutria japonica with spruce sawdust for energy recovery. Wood Research. Štátny drevársky výskumný ústav, 2018, 6(63), p. 1045-1058. ISSN 1336-4561. [Detail]

DUTKIEWICZ, J.M., Stanislav RUSZ, D. KUC, Ondřej HILŠER, P. PAŁKA and G. BOCZKAL. Superplastic deformation of two phase MgLiAl alloy after TCAP pressing. Acta Metallurgica Slovaca. Technical University of Košice, 2017, 23(3), p. 215-221. ISSN 1335-1532. [Detail]

HILŠER, Ondřej, Stanislav RUSZ, W MAZIARZ, J. DUTKIEWICZ, T. TAŃSKI, P. SNOPIŃSKI and J DŽUGAN. Structure and properties of AZ31 magnesium alloy after combination of hot extrusion and ECAP. Acta Metallurgica Slovaca. Technical University of Košice, 2017, 23(3), p. 222-228. ISSN 1335-1532. [Detail]

AMBRISKO, L'ubomir, Karel FRYDRÝŠEK, Dragana Jelisavac ERDELJAN and Marasová DANIELA. Experimental research of a new generation of support systems for the transport of mineral raw materials. Acta Montanistica Slovaca. Volume 21. BERG Faculty TU Košice, 2017, 22(4), p. 377-385. ISSN 1335-1788. [Detail]

DUTKIEWICZ, Jan, Stanislav RUSZ, Wojciech MAZIARZ, Wojciech SKUZA, Dariusz KUC and Ondřej HILŠER. Modification of Microstructure and Properties of Extruded Mg–Li–Al Alloys of α and α β Phase Composition using ECAP Processing. Acta Physica Polonica A. Polish Academy of Sciences, 2017, 131(5), p. 1303-1306. ISSN 0587-4246. [Detail]

IVÁNEK, Lubomír, Vladimír MOSTÝN, Karel SCHEE and Jan GRUN. Sensitivity of the Input Impedance Parameters of Track Circuits to Changes in the Parameters of the Track. Advances in Electrical and Electronic Engineering. VŠB - Technical University of Ostrava, 2017, 15(1), p. 77-83. ISSN 1336-1376. [Detail]

FERFECKI, Petr, Jaroslav ZAPOMĚL and Jan KOZÁNEK. Analysis of the vibration attenuation of rotors supported by magnetorheological squeeze film dampers as a multiphysical finite element problem. Advances in Engineering Software. Elsevier, 2017, 104(February 2017), p. 1-11. ISSN 0965-9978. [Detail]

MERTA, Michal, Lubomír ŘÍHA, Ondřej MECA, Alexandros MARKOPOULOS, Tomáš BRZOBOHATÝ, Tomáš KOZUBEK and Vít VONDRÁK. Intel Xeon Phi acceleration of Hybrid Total FETI solver. Advances in Engineering Software. Elsevier, 2017, 112(10 May 2017), p. 124-135. ISSN 0965-9978. [Detail]

HALAMA, Radim, Alexandros MARKOPOULOS, Roland JANČO and Matěj BARTECKÝ. Implementation of MAKOC cyclic plasticity model with memory. Advances in Engineering Software. SAN DIEGO: Elsevier, 2017, 113(November), p. 34–46. ISSN 0965-9978. [Detail]

RUDAWSKA, Anna, Albert WIERZCHOWSKI, Miroslav MUELLER, Jana PETRŮ and Natasa NAPRSTKOVA. THE PROPERTIES OF REGENERATIVE POLYMER MASS. Advances in science and technology-research journal. Lublin: Lublin University of Technology, 2017, 11(3), p. 130-138. ISSN 2299-8624. [Detail]

KRATOCHVÍL, Jiří, Jana PETRŮ, Marek PAGÁČ, Jozef HOLUBJAK and Jozef MRAZIK. EFFECT OF CHIP BREAKERS ON THE CUTTING FORCE DURING THE MACHINING OF STEEL C45. Advances in science and technology-research journal. Lublin: Lublin University of Technology, 2017, 11(1), p. 173-178. ISSN 2299-8624. [Detail]

ROZBROJ, Jiří, Jan NEČAS, Daniel GELNAR, Jakub HLOSTA and Jiří ZEGZULKA. VALIDATION OF MOVEMENT OVER A BELT CONVEYOR DRUM. Advances in science and technology-research journal. Lublin University of Technology, 2017, 11(2), p. 118-124. ISSN 2299-8624. [Detail]

SCHINDLEROVÁ, Vladimíra and Ivana ŠAJDLEROVÁ. INFLUENCE TOOL WEAR IN MATERIAL FLOW. Advances in science and technology-research journal. Lublin University of Technology, 2017, 11(1), p. 161-165. ISSN 2299-8624. [Detail]

BUŠA, Ján, Ján BUŠA, Miroslav DOVICA, Michal FABIAN, Peter IŽOL and Stanislav HONUS. An Algorithm of a Freeform Surfaces Measurement Adjustment Using a Specification of the Workpiece Coordinate System Location. Advances in science and technology-research journal. Lublin University of Technology, 2017, 11(3), p. 223-232. ISSN 2299-8624. [Detail]

HAJNYŠ, Jiří, Tomáš ZLÁMAL, Jana PETRŮ, Marek PAGÁČ and Anna RUDAWSKA. IMPACT OF CUTTING TOOL GEOMETRY ON THE DYNAMIC LOAD OF SYSTEM IN THE MACHINING PROCESS OF NICKEL ALLOY 625. Advances in science and technology-research journal. Lublin University of Technology, 2017, 10(32), p. 24-31. ISSN 2299-8624. [Detail]

NEČAS, Jan, Jakub HLOSTA, David ŽUROVEC, Martin ŽÍDEK, Jiří ROZBROJ and Jiří ZEGZULKA. FEEDER TYPE OPTIMISATION FOR THE PLAIN FLOW DISCHARGE PROCESS OF AN UNDERGROUND HOPPER BY DISCRETE ELEMENT MODELLING. Advances in science and technology-research journal. Lublin University of Technology, 2017, 11(3), p. 246-252. ISSN 2299-8624. [Detail]

HONUS, Stanislav, Václav POSPÍŠILÍK, Simona JURSOVÁ, Zdeněk ŠMÍDA, Vieroslav MOLNÁR and Miroslav DOVICA. Verifying the Prediction Result Reliability Using k-ε, Eddy Dissipation, and Discrete Transfer Models Applied on Methane Combustion Using a Prototype Low-Pressure Burner. Advances in science and technology-research journal. Lublin University of Technology, 2017, 11(4), p. 252-259. ISSN 2299-8624. [Detail]

ZLÁMAL, Tomáš, Jiří HAJNYŠ, Jana PETRŮ and Ivan MRKVICA. EFFECT OF THE CUTTING TOOL GEOMETRY ON THE TOOL WEAR RESISTANCE WHEN MACHINING INCONEL 625. Advances in science and technology-research journal. Lublin University of Technology, 2017, 11(4), p. 286-293. ISSN 2299-8624. [Detail]

HRABOVSKÝ, Leopold and Peter MICHALIK. A Tension Equalizer in Lift Carrying Ropes. Advances in science and technology-research journal. Lublin University of Technology, 2017, 11(4), p. 326-332. ISSN 2299-8624. [Detail]

KONVIČKA, Jaroslav, Ladislav VILIMEC and Miloš MAIER. Zaměření vývoje koncepce technologie pro akumulaci elektřiny u decentrálních kogeneračních, energetických zdrojů. All For Power. Konstrukce Media, s.r.o., 2017, 3(8.6.2017), p. 32-34. ISSN 1802-8535. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and Paola FORTE. A new mathematical model of a short magnetorheological squeeze film damper for rotordynamic applications based on a bilinear oil representation - derivation of the governing equations. Applied Mathematical Modelling. SAN DIEGO: Elsevier, 2017, 52(December 2017), p. 558-575. ISSN 0307-904X. [Detail]

SNOPIŃSKI, Przemysław, Tomasz TAŃSKI, Ondřej HILŠER and Adam LUBOS. Effect of ECAP process on structure and hardness of AlMg3 aluminium alloy. Archives of Materials Science and Engineering. International OCSCO World Press, 2017, 84(2), p. 79-85. ISSN 1897-2764. [Detail]

ČÍŽEK, Lubomír, Stanislav RUSZ, Ondřej HILŠER, Romana Ewa SLIWA, Dariusz KUC, Tomasz TAŃSKI and Tkocz MAREK. Microstructure and properties of selected magnesium-aluminum alloys prepared for spd processing technology. Archives of Metallurgy and Materials. Polish Academy of Sciences, 2017, 62(4), p. 2365-2370. ISSN 1733-3490. [Detail]

HORYL, Petr, Richard ŠŇUPÁREK, Pavel MARŠÁLEK and Krzysztof PACZEŚNIOWSKI. Simulation of Laboratory Tests of Steel Arch Support. Archives of mining sciences. Polish Academy of Sciences, 2017, Volume 62(Issue 1), p. 163-176. ISSN 0860-7001. [Detail]

VONTOROVÁ, Jiřina, Vaclav DOBIAS and Petr MOHYLA. Utilization of GDOES for the study of friction layers formed on the surface of brake discs during the friction process. Chemical Papers. Singapur: Springer, 2017, 71(8), p. 1507-1514. ISSN 0366-6352. [Detail]

KONAR, R., M. MICIAN, Michael BUCHA, P. VRZGULA and Ivo HLAVATÝ. Digital radiography corrosion mapping on gas pipelines. Communications. Žilinská univerzita, 2017, 19(2), p. 101-105. ISSN 1335-4205. [Detail]

HOLUBČÍK, Michal, Josef JANDAČKA, Matěj PALAČKA, Nikola KANTOVÁ, Ewa JACHNIAK and Petr PAVLÍK. The impact of bark content in wood pellets on emission production during combustion in small heat source. Communications. Žilinská univerzita, 2017, 19(2a/2017), p. 94-100. ISSN 1335-4205. [Detail]

LAPČÍK, Lubomír, David MAŇAS, Martin VAŠINA, Barbora LAPČÍKOVÁ, Martin ŘEZNÍČEK and Petr ZÁDRAPA. High density poly(ethylene)/CaCO3 hollow spheres composites for technical applications. Composites Part B: Engineering. Elsevier, 2017, 113(15 March), p. 218-224. ISSN 1359-8368. [Detail]

ČERMÁK, Martin, Václav HAPLA, Jakub KRUŽÍK, Alexandros MARKOPOULOS and Alena VAŠATOVÁ. Comparison of different FETI preconditioners for elastoplasticity. Computers & Mathematics with Applications. Oxford: PERGAMON-ELSEVIER SCIENCE LTD, 2017, 74(1), p. 96-109. ISSN 0898-1221. [Detail]

BLATA, Jan, David ŠEDĚNKA, L. KAŠIAR and P. VOLNA. Examining the condition of the ball and the ball track on the heavy machine ZP6600. Diagnostyka. Varšava: Polish Society of Technical Diagnostics, 2017, 18(3), p. 85-91. ISSN 1641-6414. [Detail]

ČEP, Robert, Ladislav KYNCL, Šárka MALOTOVÁ, Jana PETRŮ, Tomáš ZLÁMAL and Andrej CZÁN. TESTING CERAMICS INSERTS AT IRREGULAR INTERRUPTED CUT ON MATERIAL 14MoV6. Engineering Review. University of Rijeka, 2017, 37(1), p. 67-73. ISSN 1330-9587. [Detail]

HLAVICA, Robert, Zora KOŠTIALOVÁ JANČÍKOVÁ and Robert FRISCHER. Diagnostics device for 3D surface. Hutnické listy. Ocelot, 2017, LXX(2), p. 12-15. ISSN 0018-8069. [Detail]

MELO, Nicholas Bastos, Carlos Eduardo DOREA, Pablo Javier ALSINA, Marcio Valerio ARAUJO and Michal GLOGER. Ortholeg 2.0 - Design of a Transparent Active Orthosis. IEEE Latin America Transactions. IEEE, 2017, 15(10), p. 1869-1874. ISSN 1548-0992. [Detail]

RUSZ, Stanislav, Michal SALAJKA, Jan DŽUGAN, Ondřej HILŠER, Josef BOŘUTA, Martin PASTRŇÁK and Jiří ŠVEC. Development of geometry of forming tools for extrusion of strip sheet by SPD process. IOP Conference Series: Materials Science and Engineering. Volume 179. Institute of Physics, 2017, 179(1), p. 1-11. ISSN 1757-8981. [Detail]

HILŠER, Ondřej, Stanislav RUSZ, Tomasz TAŃSKI, Przemysław SNOPIŃSKI, Jan DŽUGAN and Martin KRAUS. Mechanical properties and structure of AZ61 magnesium alloy processed by equal channel angular pressing. IOP Conference Series: Materials Science and Engineering. Volume 179. Institute of Physics, 2017, 179(1), p. 1-7. ISSN 1757-8981. [Detail]

HRABOVSKÝ, Leopold. Stream lined emission particles handling for civil engineering purposes. IOP Conference Series: Materials Science and Engineering. Volume 245. American Institute of Physics, 2017, 245(7), p. 100-109. ISSN 1757-8981. [Detail]

HRABOVSKÝ, Leopold. Apparatus producing an even distribution of strain into carries. IOP Conference Series: Materials Science and Engineering. Volume 245. American Institute of Physics, 2017, 2(245), p. 109-115. ISSN 1757-8981. [Detail]

SUKHANOVA, M., V. ZABRODIN, V. BOGDANOVICH, A. SUKHANOV, Vítězslav STÝSKALA, Jiří ZEGZULKA, Lucie JEZERSKÁ and Jiří ROZBROJ. „Mixer-Dresser“ Hybrid Device. Indian journal of science and technology. Indian Society for Education and Environment, 2017, 10(1), p. 1-4. ISSN 0974-6846. [Detail]

MOHYLA, Petr, Ivo HLAVATÝ, Jiří HRUBÝ and Lucie KREJČÍ. Investigation of Heat Affected Zone of Steel P92 Using the Thermal Cycle Simulator. International Journal of Materials and Metallurgical Engineering. Volume 11. World Academy of Science, Engineering and Technology, 2017, 6(11), p. 460-463. ISSN 1307-6892. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and J. KOZÁNEK. Modelling of magnetorheological squeeze film dampers for vibration suppression of rigid rotors. International Journal of Mechanical Sciences. SAN DIEGO: Elsevier, 2017, 127(July 2017), p. 191-197. ISSN 0020-7403. [Detail]

PAPUGA, J. and František FOJTÍK. Multiaxial fatigue strength of common structural steel and the response of some estimation methods. International journal of fatigue. Elsevier, 2017, 2017(104), p. 27-42. ISSN 0142-1123. [Detail]

ŠVÉDOVÁ, Barbora, Helena RACLAVSKÁ, Dalibor MATÝSEK, Marek KUCBEL, Konstantin RACLAVSKÝ and Jana RŮŽIČKOVÁ. Identification of Pollution Sources in the Urban Atmosphere. Inżynieria Mineralna. Kraków: Polskie towarzystwo przeróbki kopalin, 2017, 39(1), p. 147-152. ISSN 1640-4920. [Detail]

HLOSTA, Jakub, David ŽUROVEC, Michal KRATOCHVÍL, Jiří BOTULA and Jiří ZEGZULKA. WEEE Sorting Processes and Separation of Copper Wires with Support of Dem Modeling. Inżynieria Mineralna. Kraków: Polskie towarzystwo przeróbki kopalin, 2017, 1(1), p. 159-164. ISSN 1640-4920. [Detail]

ŽUROVEC, David, Jakub HLOSTA, Daniel GELNAR, Jan NEČAS and Jiří ZEGZULKA. The Behavior of Fly Ash on the Vibrating Vertical Conveyor. Inżynieria Mineralna. Kraków: Polskie towarzystwo przeróbki kopalin, 2017, 1(1), p. 183-188. ISSN 1640-4920. [Detail]

RŮŽIČKOVÁ, Jana, Helena RACLAVSKÁ, Drahoslava ZMIJKOVÁ, Konstantin RACLAVSKÝ and Veronika SASSMANOVÁ. Organic Compounds in Pyrolytic Carbon. Inżynieria Mineralna. Kraków: Polskie towarzystwo przeróbki kopalin, 2017, 16(1), p. 83-88. ISSN 1640-4920. [Detail]

RŮŽIČKOVÁ, Jana, Marek KUCBEL, Barbora ŠVÉDOVÁ, Kristína ŠTRBOVÁ and Konstantin RACLAVSKÝ. Organic Compounds on PM10 Particles in Air Pollution. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2017, 39(1), p. 7-12. ISSN 1640-4920. [Detail]

RACLAVSKÁ, Helena, Agnieszka CORSARO, Silvie HARTMANN-KOVAL and Dagmar JUCHELKOVÁ. Enrichment and distribution of 24 elements within the sub-sieve particle size distribution ranges of fly ash from wastes incinerator plants. Journal of Environmental Management. Elsevier, 2017, 203(3), p. 1169-1177. ISSN 0301-4797. [Detail]

KUCBEL, Marek, Agnieszka CORSARO, Barbora ŠVÉDOVÁ, Helena RACLAVSKÁ, Konstantin RACLAVSKÝ and Dagmar JUCHELKOVÁ. Temporal and seasonal variations of black carbon (BC) in a highly polluted Eastern European city: Apportionment of potential sources and the effect of meteorological conditions. Journal of Environmental Management. Elsevier, 2017, 203(3), p. 1178-1189. ISSN 0301-4797. [Detail]

ŠTRBOVÁ, Kristína, Helena RACLAVSKÁ and Jiří BÍLEK. Impact of fugitive sources and meteorological parameters on vertical distribution of particulate matter over the industrial agglomeration. Journal of Environmental Management. Elsevier, 2017, 203(3), p. 1190-1198. ISSN 0301-4797. [Detail]

LAPČÍK, Lubomír, Martin VAŠINA, Barbora LAPČÍKOVÁ, Mária PLŠKOVÁ, Robert GÁL and Michaela BRYCHTOVÁ. Application of a vibration damping technique in characterizing mechanical properties of chicken meat batters modified with amaranth. Journal of Food Measurement and Characterization. Springer, 2017, 11(4), p. 1987-1994. ISSN 2193-4126. [Detail]

FRIEDEL, Pavel and Jakub ČESPIVA. Reconstructed gasification technology. Journal of Mechanical Engineering. Iaras, 2017, 2(Volume 2, 2017), p. 129-133. ISSN 2367-8968. [Detail]

ČADA, Radek, Karel FRYDRÝŠEK, František SEJDA, Jiří DEMEL and Leopold PLEVA. Analysis of Locking Self-Taping Bone Screws for Angularly Stable Plates. Journal of Medical and Biological Engineering. Springer Heidelberg, 2017, 37(4), p. 612-625. ISSN 1609-0985. [Detail]

SCHROEDER, Florian, Stanislav POLZER, Martin SLAŽANSKÝ, Vojtěch MAN and Pavel SKÁCEL. Predictive capabilities of various constitutive models for arterial tissue. Journal of the Mechanical Behavior of Biomedical Materials. Elsevier Science, 2017, 78(22.11.2017), p. 369-380. ISSN 1751-6161. [Detail]

HATAKENAKA, M, J FURUKAWA, T TERAMAE, A JINO, Y HIRAMATSU, N HATTORI, T KAWANO, H OTOMUNE, H FUJIMOTO, H YAGURA, Michal GLOGER, T NODA and J MORIMOTO. Optimizing neurorehabilitation for stroke using an exoskeleton robot. Journal of the Neurological Sciences. Elsevier, 2017, 381(381), p. 598. ISSN 0022-510X. [Detail]

BÍLEK, Ondřej and Martin VAŠINA. Influence of machined surface shape on light absorption. MM Science Journal. MM Publishing, 2017, 2017(JUNE), p. 1851-1854. ISSN 1803-1269. [Detail]

MRKVICA, Ivan, Tomáš SZOTKOWSKI, Miroslav JANOŠ, Jana PETRŮ and Tomáš ZLÁMAL. Square Shaped Insert´s Lifetime when Milling Inconel 718. MM Science Journal. MM Publishing, 2017, 10(5), p. 1995-2003. ISSN 1803-1269. [Detail]

KLOUDA, Petr, Vlastimil MONI, Jan BLATA, Lubomír DONÁT and František HELEBRANT. Degradation of the state of a ball track at the ZP 6600. Management Systems in Production Engineering. De Gruyter, 2017, 25(1), p. 68-75. ISSN 2299-0461. [Detail]

MONI, Vlastimil, Petr KLOUDA, Jan BLATA and František HELEBRANT. The application for a prediction of the coal spontaneous ignition - PREDISAM. Management Systems in Production Engineering. De Gruyter, 2017, 25(2), p. 81-87. ISSN 2299-0461. [Detail]

ŠPALEK, František, Marek SADÍLEK, Robert ČEP, Jana PETRŮ, Jiří KRATOCHVÍL and Tomáš ČEGAN. Difference between cutting surface of Al foam and solid Al machined by WEDM technology. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2017, 17(5), p. 853-858. ISSN 1213-2489. [Detail]

MRKVICA, Ivan, Tomáš SZOTKOWSKI, Kamil DIHEL, Jozef JURKO and Anton PANDA. Jig design for welding of wind power plant component. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2017, 17(2), p. 237-242. ISSN 1213-2489. [Detail]

BUREČEK, Adam, Lumír HRUŽÍK and Martin VAŠINA. Dynamics of Linear Hydraulic Cylinder with Mass Load. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2017, 17(3), p. 296-302. ISSN 1213-2489. [Detail]

MRKVICA, Ivan, Tomáš SZOTKOWSKI, Zbyněk TÝN, Jana PETRŮ and Tomáš ZLÁMAL. Jig design for window frame welding of rail-borne door systems. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2017, 17(4), p. 526-530. ISSN 1213-2489. [Detail]

BOHÁČIK, Michal, Miloš MIČIAN, Radoslav KOŇÁR and Ivo HLAVATÝ. Ultrasonic testing of butt weld joint by TOFD technique. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2017, 17(6), p. 842-847. ISSN 1213-2489. [Detail]

ŠPALEK, František, Marek SADÍLEK, Robert ČEP, Jana PETRŮ, Jiří KRATOCHVÍL and Tomáš ČEGAN. Difference between Cutting Surface of Al Foam and Solid Al Machined by WEDM Technolo-gy. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2017, 17(5), p. 853-858. ISSN 1213-2489. [Detail]

HAŠOVÁ, Slavomíra, Luboslav STRAKA and František ŠPALEK. Impact assessment of input factors on tool electrode wear in die sinking EDM of Steel EN43CrMo4. Materials Structure & Micromechanics of Fracture. Zürich: Trans Tech Publications, 2017, 756(1), p. 127-135. ISBN 978-3-03835-719-3. [Detail]

KOCICH, Radim, Lenka KUNČICKÁ, Adéla MACHÁČKOVÁ and Michal ŠOFER. Improvement of mechanical and electrical properties of rotary swaged Al-Cu clad composites. Materials and Design. Elsevier, 2017, 123(June), p. 137-146. ISSN 0264-1275. [Detail]

HILŠER, Ondřej, Stanislav RUSZ, Wojciech MAZIARZ, Robert CHULIST, Jan DUTKIEWICZ, Lubomír ČÍŽEK, Martin KRAUS and Tomasz TAŃSKI. Grain refinement of AZ61 alloy after ECAP processing. Materials science forum. Volume 891. Trans Tech Publication Ltd, 2017, 891(1), p. 372-376. ISSN 0255-5476. [Detail]

TAŃSKI, Tomasz, Przemysław SNOPIŃSKI and Ondřej HILŠER. Microstructure and mechanical properties of two binary Al-Mg alloys deformed using equal channel angular pressing. Materialwissenschaft und Werkstofftechnik. Wiley-VCH, 2017, 48(5), p. 439-446. ISSN 0933-5137. [Detail]

HALAMA, Radim, Alexandros MARKOPOULOS, František FOJTÍK, Martin FUSEK, Zdeněk PORUBA and Jan FAMFULÍK. Effect of mean stress and stress amplitude on uniaxial ratcheting of AA2124T851. Materialwissenschaft und Werkstofftechnik. Wiley-VCH, 2017, 48(8), p. 814-819. ISSN 0933-5137. [Detail]

JABLONSKÁ, Jana, Miroslav MAHDAL and Milada KOZUBKOVÁ. Spectral Analysis of Pressure, Noise and Vibration Velocity Measurement in Cavitation. Measurement Science Review. De Gruyter, 2017, 17(6), p. 250-256. ISSN 1335-8871. [Detail]

ZAVILA, Ondřej and Tomáš BLEJCHAŘ. Capacities and Limitations of Wind Tunnel Physical Experiments on Motion and Dispersion of Different Density Gas Pollutants. Measurement Science Review. De Gruyter, 2017, 17(2), p. 53-60. ISSN 1335-8871. [Detail]

MOHYLA, Petr, Lukáš HAVELKA, Eva SCHMIDOVÁ and Jiřina VONTOROVÁ. Mechanical Properties of Steel P92 Welded Joints Obtained By TIG Technology. Metal Science and Heat Treatment. New York: Springer, 2017, 59(7-8), p. 540-542. ISSN 0026-0673. [Detail]

HRABOVSKÝ, Leopold. Modely otočných zdvihacích zařízení. Perners Contact. Univerzita Pardubice, 2017, XXII(3), p. 25-32. ISSN 1801-674X. [Detail]

HRABOVSKÝ, Leopold. Nástěnný jeřáb a jeho mechanismy. Perners Contact. Univerzita Pardubice, 2017, XII(1), p. 41-47. ISSN 1801-674X. [Detail]

OLIVKOVÁ, Ivana. Comparison and Evaluation of Fare Collection Technologies in the Public Transport. Procedia Engineering. Volume 178. Elsevier Science, 2017, 178(178), p. 515-525. ISSN 1877-7058. [Detail]

VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Seřízení regulátorů metodou požadovaného modelu. STROJÁRSTVO. MEDIA/ST s.r.o., 2017, 21(4), p. 93-93. ISSN 1335-2938. [Detail]

BABIUCH, Marek. Windows 10 IoT Application for Data Acquisition from Sensors. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2017, 63(1), p. 1-8. ISSN 1210-0471. [Detail]

GEBAUER, Jan and Renata WAGNEROVÁ. Variable Pitch Propulsion Drive Model. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2017, 63(1), p. 25-30. ISSN 1210-0471. [Detail]

HÝL, Radim and Renata WAGNEROVÁ. MPC Control for Superheated Steam Temperature. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2017, 63(2), p. 31-36. ISSN 1210-0471. [Detail]

JUREK, Martin. Input Shaping for Underdamped Systems. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2017, 63(1), p. 39-47. ISSN 1210-0471. [Detail]

LANDRYOVÁ, Lenka and Patrik URBAN. The Use of Association Rules in The Analysis of the Trends of Alarms. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2017, 63(1), p. 49-56. ISSN 1210-0471. [Detail]

VYKOUKAL, Ondřej, Lumír HRUŽÍK and Adam BUREČEK. Static characteristics of pressure control valve. Strojnícky časopis. Slovenská akademie věd, 2017, 67(1), p. 119-123. ISSN 0039-2472. [Detail]

VYKOUKAL, Ondřej, Lumír HRUŽÍK and Adam BUREČEK. STATIC CHARACTERISTICS OF PRESSURE CONTROL VALVE. Strojnícky časopis. Slovenská akademie věd, 2017, 67(1), p. 119-124. ISSN 0039-2472. [Detail]

JABLONSKÁ, Jana, Milada KOZUBKOVÁ, Barbora ZAVADILOVÁ, Lukáš ZAVADIL and Simona FIALOVÁ. The Investigation of the Cavitation Phenomenon in the Laval Nozzle with Full and Partial Surface Wetting. Strojnícky časopis. Slovenská akademie věd, 2017, 67(1), p. 55-68. ISSN 0039-2472. [Detail]

REGUEIRO, A, Lucie JEZERSKÁ, D. PATIÑO, R. PÉREZ-OROZCO, Jan NEČAS and Martin ŽÍDEK. Experimental Study of the Viability of Low-Grade Biofuels in Small-Scale Appliances. Sustainability. MDPI Open Access Publishing, 2017, 9(1823), p. 1-16. ISSN 2071-1050. [Detail]

PEER, Václav, Pavel FRIEDEL, Jan SKŘÍNSKÝ and Ján VEREŠ. Výzkumná zplyňovací technologie s autotermním generátorem. TZB-info. Topinfo s.r.o., 2017, 3/2017(3/2017), p. 1-10. ISSN 1801-4399. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Dieselgate - co bude dál? Část 2: Automobilová maziva z pohledu normotvůrců ACEA a API. Technická diagnostika. Asociace technických diagnostiků ČR, 2017, 26(z1), p. 101-111. ISSN 1210-311X. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Dieselgate - co bude dál? Část 1: Emise (stručný popis dopadů a opatření v USA a Evropě). Technická diagnostika. Asociace technických diagnostiků ČR, 2017, 26(z1), p. 88-100. ISSN 1210-311X. [Detail]

ZAPOMĚL, Jaroslav and Petr FERFECKI. Study of the influence of a delayed yielding phenomenon in magnetorheological damping devices on the vibration attenuation of a Jeffcott rotor. Technische Mechanik. Magdeburg: Otto-von-Guericke-Universität, 2017, 37(2-5), p. 377-383. ISSN 0232-3869. [Detail]

KŘÍSTEK, Ivo, Jiří HAVLÍK, Václav MOSLER, Igor DANIŠ and Jozef PILC. Determinig the Shape Faktor for Bend Torque. Technologické inžinierstvo. University of Žilina, 2017, 14(1/2017), p. 11-13. ISSN 1336-5967. [Detail]

KŘÍSTEK, Ivo, Jiří HAVLÍK, Václav MOSLER and Igor DANIŠ. Determinig the Shape Coefficient a of Groove on the Pen for the Shaft. Technologické inžinierstvo. University of Žilina, 2017, 14(2/2017), p. 12-13. ISSN 1336-5967. [Detail]

PETRŮ, Jana, Tomáš ZLÁMAL, Robert ČEP, Marek SADÍLEK and Dana STANCEKOVA. THE EFFECT OF FEED RATE ON DURABILITY AND WEAR OF EXCHANGEABLE CUTTING INSERTS DURING CUTTING Ni-625. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2017, 24(Supplement 1), p. 1-6. ISSN 1330-3651. [Detail]

HLAVATÝ, Ivo, Jindřich KOZÁK, Lucie KREJČÍ, Ivan SAMARDZIC and Jari TUOMINEN. THE EFFECT OF TUNGSTEN CARBIDE PARTICLES CONTENT IN A WELD DEPOSIT ON ITS ABRASION RESISTANCE. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2017, 24(5), p. 1345-1349. ISSN 1330-3651. [Detail]

HALAMA, Radim, Michal ŠOFER, Jaroslav ROJÍČEK, František FOJTÍK and Kamil KOLARIK. A method for predicting ratcheting and wear in rolling contact fatigue, taking technological residual stresses into consideration. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2017, 24(Supplement 1), p. 7-14. ISSN 1330-3651. [Detail]

HRUŽÍK, Lumír, Adam BUREČEK and Martin VAŠINA. MATHEMATICAL SIMULATION AND MEASUREMENT OF EXPANSION OF HYDRAULIC HOSE WITH OIL. Tehnički vjesnik – Technical Gazette. University of Osijek, 2017, 24(6), p. 1905-1914. ISSN 1330-3651. [Detail]

MICIETOVA, Anna, Miroslav NESLUSAN, Robert ČEP, Vladislav OCHODEK, Branislav MICIETA and Marek PAGÁČ. DETECTION OF GRINDING BURN THROUGH THE HIGH AND LOW FREQUENCY BARKHAUSEN NOISE. Tehnički vjesnik – Technical Gazette. University of Osijek, 2017, 24(Supplement 1), p. 71-77. ISSN 1330-3651. [Detail]

POKORNÝ, Jiří, Lenka MALÉŘOVÁ and Horst GONDEK. Stanovení charakteristik lokálního požáru v návaznosti na standardy pro hodnocení požární bezpečnosti staveb v České republice. The Science for Population Protection. Ministerstvo vnitra GŘ hasičského záchranného sboru, 2017, 9(2), p. 1-10. ISSN 1803-635X. [Detail]

FRIEDEL, Pavel. RECONSTRUCTION OF RESEARCH GASIFICATION TECHNOLOGY AT THE ENERGY. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2017, vol. LXIII(No. 2, 2017), p. 1-9. ISSN 1210-0471. [Detail]

HILŠER, Ondřej, Stanislav RUSZ, Lucie KREJČÍ and František ŠPALEK. Grain refinement of extruded AZ31 magnesium alloy by ECAP process. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2017, 63(1), p. 31-37. ISSN 1210-0471. [Detail]

ŠVEC, Jiří, Stanislav RUSZ, Ondřej HILŠER, Vladislav OCHODEK and Lucie KREJČÍ. Mechanical properties of steel DC01 formed by DRECE method. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2017, 63(1), p. 63-72. ISSN 1210-0471. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Dieselgate - co bude dál? Část 1: Emise (stručný popis dopadů a opatření v USA a Evropě). Tribotechnika. Techpark, o.z., 2017, 10(3), p. 58-62. ISSN 1338-0524. [Detail]

CHYTKA, Petr, Ladislav HRABEC and Michaela HRABCOVÁ. Dieselgate - co bude dál? Část 2: Automobilová maziva z pohledu normotvůrců ACEA a API. Tribotechnika. Techpark, o.z., 2017, 10(4), p. 62-66. ISSN 1338-0524. [Detail]

POKORNÝ, Jiří, Marianna TOMÁŠKOVÁ and Horst GONDEK. Srovnání metod pro stanovení průtoku kouře využitelných při návrzích zařízení pro odvod kouře a tepla. Vytápění, větrání, instalace. Společnost pro techniku prostředí, 2017, 26(2), p. 82-86. ISSN 1210-1389. [Detail]

BRÁZDA, Robert and Zdeněk PORUBA. Využití DEM simulace sypkých hmot v praxi. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2017, 1(2017), p. 19-24. ISSN 1213-1660. [Detail]

JEZERSKÁ, Lucie, Jakub HLOSTA, Kateřina BÍLKOVÁ, Jiří ZEGZULKA and Jan NEČAS. GoldCell® selenium yeast: Flow characterization, hopper geometry design and arching height determination. Česká a Slovenská farmacie. Česká lékařská společnost J.E. Purkyně, 2017, 5(1), p. 1-6. ISSN 1210-7816. [Detail]

ZLÁMAL, Tomáš, Jana PETRŮ, Ondřej VORTEL, Marek PAGÁČ and Pavel KRAJKOVIČ. MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING SPECIAL ALLOYS. ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL. WARSAW: SOC POLISH MECHANICAL ENGINEERS & TECHNICIANS, 2016, 10(31), p. 144-150. ISSN 2299-8624. [Detail]

POKORNÝ, Jiří and Horst GONDEK. Comparison of theoretical method of the gas flow in corridors with experimental measurement in real scale. Acta Montanistica Slovaca. Volume 18. Košice: Technická univerzita Košice, 2016, 21(2), p. 146-153. ISSN 1335-1788. [Detail]

VALÍČEK, Jan, Marta HARNIČÁROVÁ, A PANDA, Ivo HLAVATÝ, Milena KUŠNEROVÁ, Hakan TOZAN, Mustafa YAGIMLI and Vojtěch VÁCLAVÍK. Mechanism of creating the topography of an abrasive water jet cut surface. Advanced Structured Materials. Volume 61. Springer Science and Business Media, LLC, 2016, 61(1), p. 111-120. ISSN 1869-8433. [Detail]

UČEŇ, Oldřich and Lubomír NOVOTNÝ. Methodology of Geometry Testing and Measuring of Machine Tool Components Having Big Dimensions and Their Verification Using the FEM Method. Applied Mechanics and Materials. Volume 821. Trans Tech Publications, 2016, p. 378-384. ISSN 1662-7482. [Detail]

VAŠINA, Martin, Daniela PLACHÁ, Marcel MIKESKA, Lumír HRUŽÍK and Gražyna SIMHA MARTYNKOVÁ. Sound absorption study of raw and expanded particulate vermiculites. Applied Physics A: Materials Science and Processing. New York: Springer, 2016, 122(12), p. 998. ISSN 0947-8396. [Detail]

TAŃSKI, Tomasz, Przemyslaw SNOPIŃSKI, Wojciech PAKIEŁA, Wojciech BOREK, Krystian PRUSIK and Stanislav RUSZ. Structure and properties of AlMg alloy after combination of ECAP and post-ECAP ageing. Archives of Civil and Mechanical Engineering. Polish Academy of Sciences - Wrocław Branch, 2016, 16(3), p. 325-334. ISSN 1644-9665. [Detail]

GRAF, Vojtěch, Dušan TEICHMANN and Michal DORDA. Mathematical Model for Charter Flights Planning at Airports with High Air Traffic Volume. Communications. Žilinská univerzita, 2016, 18(3), p. 22-27. ISSN 1335-4205. [Detail]

LAPČÍK, Lubomír, Matthew J. A. RUSZALA, Martin VAŠINA, Barbora LAPČÍKOVÁ, Jakub VLČEK, Neil ROWSON, Liam GROVER and Richard GREENWOOD. Hollow spheres as nanocomposite fillers for aerospace and automotive composite materials applications. Composites Part B: Engineering. SAN DIEGO: Elsevier, 2016, 106, p. 74-80. ISSN 1359-8368. [Detail]

CORSARO, Agnieszka, Helena RACLAVSKÁ, Adéla ČÍŽKOVÁ, Jan FRYDRYCH and Dagmar JUCHELKOVÁ. Perennial grasses as prospective energy sources. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. Taylor & Francis, 2016, 38(9), p. 1206-1211. ISSN 1556-7036. [Detail]

HLAVSOVÁ, Adéla, Agnieszka CORSARO, Helena RACLAVSKÁ, Silvie VALLOVÁ and Dagmar JUCHELKOVÁ. The effect of feedstock composition and taxonomy on the products distribution from pyrolysis of nine herbaceous plants. Fuel Processing Technology. SAN DIEGO2016, 144, p. 27-36. ISSN 0378-3820. [Detail]

HEISIG, Lukáš, Jan BLATA and František HELEBRANT. The evaluation of risk degree for the process of brown coal spontaneous ignition on dumps with using of modern numeric methods. International Journal of Engineering & Technical Research. Engineering Research Publication, 2016, 1(1), p. 24-26. ISSN 2454-4698. [Detail]

KOCICH, Radim, Lenka KUNČICKÁ, Daniel DOHNALÍK, Adéla MACHÁČKOVÁ and Michal ŠOFER. Cold rotary swaging of a tungsten heavy alloy: Numerical and experimental investigations. International Journal of Refractory Metals and Hard Materials. SAN DIEGO: Elsevier, 2016, 61(December), p. 264-272. ISSN 0263-4368. [Detail]

HALAMA, Radim, Martin FUSEK and Zdeněk PORUBA. Influence of mean stress and stress amplitude on uniaxial and biaxial ratcheting of ST52 steel and its prediction by the AbdelKarim-Ohno model. International journal of fatigue. SAN DIEGO: Elsevier, 2016, 91(2), p. 313-321. ISSN 0142-1123. [Detail]

SNOPINSKI, Przemyslaw, Tomasz TANSKI, Krzysztof LABISZ, Stanislav RUSZ, Petr JONŠTA and Mariusz KROL. Wrought aluminium-magnesium alloys subjected to SPD processing. International journal of materials research. Hanser, 2016, 107(7), p. 637-645. ISSN 1862-5282. [Detail]

RŮŽIČKOVÁ, Jana, Marek KUCBEL, Konstantin RACLAVSKÝ and Helena RACLAVSKÁ. Chemical composition of biochar from combustion in local heating. Inżynieria Mineralna. Kraków: Polskie towarzystwo przeróbki kopalin, 2016, 17(1), p. 23-27. ISSN 1640-4920. [Detail]

ŽÍDEK, Martin, Jiří ZEGZULKA, Lucie JEZERSKÁ, Jakub HLOSTA and Jan NEČAS. Optimisation of Geometry of the Chain Conveyor Carriers by DEM Method. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2016, 2(36), p. 143-148. ISSN 1640-4920. [Detail]

VYLETĚLEK, Jan, Daniel GELNAR, Martin ŽÍDEK, David ŽUROVEC and Lucie JEZERSKÁ. Recording of the Particular Matter Behaviour when Leaving a Container. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2016, 2(36), p. 201-206. ISSN 1640-4920. [Detail]

LAPČÍK, Lubomír, Martin VAŠINA, Barbora LAPČÍKOVÁ and Tomáš VALENTA. Study of bread staling by means of vibro-acoustic, tensile and thermal analysis techniques. Journal of Food Engineering. SAN DIEGO: Elsevier, 2016, 178, p. 31-38. ISSN 0260-8774. [Detail]

ŠVÉDOVÁ, Barbora, Marek KUCBEL, Helena RACLAVSKÁ, Konstantin RACLAVSKÝ and Dalibor MATÝSEK. Heavy metals in air nanoparticles in affected industry area. Journal of Sustainable Development of Energy, Water and Environment Systems. Zagreb: International Centre for Sustainable Development of Energy, Water and Environment Systems SDEWES, 2016, 5(1), p. 58-68. ISSN 1848-9257. [Detail]

HRABOVSKÝ, Leopold. Action On Crane Runway Caused by Horizontal Forces Due To Crane Skewing. Key Engineering Materials. Volume 669. Trans Tech Publications, 2016, Volume 669(Volume 669), p. 391-399. ISSN 1013-9826. [Detail]

MATYSIAK, W., D. BARTKOWSKI, M. HATALA, J. ZAJAC, S. RADCHENKO and Robert ČEP. Study on edgetrimming of holes in the thick steel plates by metal plastic forming technology. Key Engineering Materials. Volume 669. Trans Tech Publications, 2016, 669(669), p. 87-94. ISSN 1013-9826. [Detail]

CIZIKOVA, A., K. MONKOVA, J. MARKOVIC and Jakub CIENCIALA. Numerical and experimental modal analysis of gear wheel. MM Science Journal. Praha: MM Publishing, 2016, 2016(NOVEMBER), p. 1232-1236. ISSN 1803-1269. [Detail]

NOVÁK, Petr, Ján BABJAK and Tomáš KOT. Thermal exposition monitoring of firefighters. MM Science Journal. Praha: MM Publishing, 2016, 2016(NOVEMBER), p. 1482-1486. ISSN 1803-1269. [Detail]

UČEŇ, Oldřich and Lubomír NOVOTNÝ. Innovation testing of bending of the machine-tool frames. MM Science Journal. Praha: MM Publishing, 2016, 2016(DECEMBER), p. 1625-1629. ISSN 1803-1269. [Detail]

JURSOVÁ, Simona and Stanislav HONUS. STUDY ON DISINTEGRATION OF METALLURGICAL SINTER. MM Science Journal. MM Publishing, 2016, 2016(November), p. 1440-1444. ISSN 1803-1269. [Detail]

JURSOVÁ, Simona and Stanislav HONUS. Study on Disintegration of Metallurgical Sinter as a Possible Tool for Ironmaking Optimization. MM Science Journal. MM Publishing, 2016, _(December 2016), p. 1440-1444. ISSN 1803-1269. [Detail]

LIPINA, Jan and Václav KRYS. APPLICATION OF RAPID PROTOTYPING TECHNOLOGY IN DESIGNING ROBOTS AND PERIPHERAL DEVICES. MM Science Journal. MM Publishing, 2016, 1(1), p. 856-861. ISSN 1803-1269. [Detail]

GALA, Matěj, Václav KRYS and Tomáš KOT. The Mechanical Design and Realization of the Omnidirectional Mobile Robot Odin. MM Science Journal. MM Publishing, 2016, June 2016(Number 2), p. 896-899. ISSN 1803-1269. [Detail]

VYSOCKÝ, Aleš and Petr NOVÁK. HUMAN – ROBOT COLLABORATION IN INDUSTRY. MM Science Journal. MM Publishing, 2016, June 2016(Number 2), p. 903-906. ISSN 1803-1269. [Detail]

MRKVICA, Ivan, Vojtěch SLÉHA, Jana PETRŮ, M. NESLUSAN, J. JURKO and A. PANDA. Design of control jig for inserts measurement. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2016, 16(1), p. 198-204. ISSN 1213-2489. [Detail]

TICHÁ, Šárka, Ondřej SRBA and Jan VAVŘINA. A measuring device for the checking of 3D indicators. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2016, 16(1), p. 280-284. ISSN 1213-2489. [Detail]

ČEPOVÁ, Lenka, Dagmar ŠOKOVÁ, Šárka MALOTOVÁ, Bartosz GAPINSKI and Robert ČEP. Evaluation of cutting forces and surface roughness after machining of selected materials. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2016, 16(1), p. 45 - 48. ISSN 1213-2489. [Detail]

PANDA, A., M. PRISLUPČÁK, J. JURKO, I. PANDOVÁ, Ivan MRKVICA and S. LUSCINSKI. The impact of vibration on the technological head. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2016, 16(3), p. 579-585. ISSN 1213-2489. [Detail]

VAŠINA, Martin and Ondřej BILEK. Effect of machined surface shape on sound reflection. Manufacturing Technology. Ústí nad Labem: Univerzita Jana Evangelisty Purkyně, 2016, 16(4), p. 830-834. ISSN 1213-2489. [Detail]

VAŠINA, Martin, Lumír HRUŽÍK and Adam BUREČEK. Structural Damping of Mechanical Vibration. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2016, Volume 16(No. 6), p. 1379-1382. ISSN 1213-2489. [Detail]

MALOTOVÁ, Šárka, Robert ČEP, Lenka ČEPOVÁ, Jana PETRŮ, Dana STANČEKOVÁ, Ladislav KYNCL and Michal HATALA. Roughness Evaluation of the Machined Surface at Interrupted Cutting Process. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2016, 16(1), p. 168-173. ISSN 1213-2489. [Detail]

ŠPALEK, František, Jana PETRŮ, Tomáš ZLÁMAL, Ivan MRKVICA, Robert ČEP and Jiří KRATOCHVÍL. Electro-Erosive Wire Cutting of Aluminum Foam. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2016, 16(2), p. 449-453. ISSN 1213-2489. [Detail]

DUBOVSKÁ, Rosemarina, Jozef MAJERÍK, Robert ČEP and Karel KOUŘIL. INVESTIGATING THE INFLUENCE OF CUTTING SPEED ON THE TOOL LIFE OF CUTTING INSERT IN CUTTING THE DIN 1.4301 STEEL. Materiali in tehnologije. Inštitut za kovinske materiale in tehnologije, 2016, 50(3), p. 439-445. ISSN 1580-2949. [Detail]

KUNČICKÁ, Lenka, Radim KOCICH, Petr KRÁL, Martin POHLUDKA and Martin MAREK. Effect of strain path on severely deformed aluminium. Materials letters. SAN DIEGO: Elsevier, 2016, 180(October), p. 280-283. ISSN 0167-577X. [Detail]

VALÍČEK, Jan, Marta HARNIČÁROVÁ, Ivo HLAVATÝ, Radovan GRZNÁRIK, Milena KUŠNEROVÁ, Zuzana HUTYROVÁ and Anton PANDA. A new approach for the determination of technological parameters for hydroabrasive cutting of materials. Materialwissenschaft und Werkstofftechnik. Wiley-VCH, 2016, 47(5-6), p. 462-471. ISSN 0933-5137. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. Dynamical properties of a non-autonomous bouncing ball model forced by non-harmonic excitation. Mathematical Methods in the Applied Sciences. New York: John Wiley & Sons, 2016, 39(16), p. 4923-4929. ISSN 0170-4214. [Detail]

JABLONSKÁ, Jana, Milada KOZUBKOVÁ, Michal WEISZ and Daniel HIMR. Methods of Experimental Investigation of Cavitation in a Convergent - Divergent Nozzle of Rectangular Cross Section. Measurement Science Review. Varšava: De Gruyter, 2016, 16(4), p. 197-204. ISSN 1335-8871. [Detail]

ZAPOMĚL, Jaroslav, Ivo STACHIV and Petr FERFECKI. A novel method combining Monte Carlo-FEM simulations and experiments for simultaneous evaluation of the ultrathin film mass density and Young's modulus. Mechanical Systems and Signal Processing. Elsevier, 2016, 66-67(January 2016), p. 223-231. ISSN 0888-3270. [Detail]

STANCEKOVA, D., D. STEKLAC, Jana PETRŮ, Tomáš ZLÁMAL, Marek SADÍLEK, M. JANOTA and M. KORDIK. Influence of machining and heat treatment on deformations of thin-walled bearings. Metallography XV : selected, peer reviewed papers from the International Symposium on Metallography (Metallography 2013), April 24-26, 2013, Stará Lesná, Slovak Republic. Zürich: Trans Tech Publications, 2016, 862(1), p. 49-58. ISBN 978-3-03835-740-7. [Detail]

BLEJCHAŘ, Tomáš, Václav NEVRLÝ, Michal VAŠINEK, Michal DOSTÁL, Milada KOZUBKOVÁ, Jakub DLABKA, Martin STACHOŇ, Libor JUHA, Petr BITALA, Zdeněk ZELINGER, Peter PIRA and Jan WILD. Desorption/ablation of lithium fluoride induced by extreme ultraviolet laser radiation. Nukleonika. Warszawa: Institute of Nuclear Chemistry and Technology, 2016, 61(2), p. 131-138. ISSN 0029-5922. [Detail]

VITÁSEK, Jan, Vladimír VAŠINEK, Jan LÁTAL and Lukáš HÁJEK. Visible light communications with compound spectra. Optics communications. Elsevier, 2016, 363(15 March), p. 63-68. ISSN 0030-4018. [Detail]

ŘÍHA, Lubomír, Tomáš BRZOBOHATÝ, Alexandros MARKOPOULOS, Marta JAROŠOVÁ, Tomáš KOZUBEK, David HORÁK and Václav HAPLA. Implementation of the efficient communication layer for the highly parallel total FETI and hybrid total FETI solvers. Parallel computing. SAN DIEGO: Elsevier, 2016, 57(SEP 2016), p. 154-166. ISSN 0167-8191. [Detail]

SADÍLEK, Marek, Jaroslav DUBSKÝ, Zuzana SADÍLKOVÁ and Zdeněk PORUBA. Cutting forces during turning with variable depth of cut. Perspectives in Science. Elsevier, 2016, 2016(7), p. 357-363. ISBN 0-000-00000-0. [Detail]

LANDRY, Mark and Lenka LANDRYOVÁ. How Cultural and Linguistic Considerations Affect the Learning of English in the Czech Republic. Procedia-Social and Behavioral Science. Elsevier, 2016, 228(1), p. 92-99. ISSN 1877-0428. [Detail]

FAMFULÍK, Jan, Jana MÍKOVÁ, Michal RICHTÁŘ and Radim HALAMA. Random vector approach to the calculation of the number of railway vehicles to hold in reserve. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. Sage, 2016, Volume 230(1), p. 253-257. ISSN 0954-4097. [Detail]

POLKO, Krzysztof, Marian BOJKO, Milada KOZUBKOVÁ, Janusz LICHOTA and Jana JABLONSKÁ. Modele matematyczne kondensacyjnych wymienników ciepła typu spaliny-woda. Rynek energii. 2016, 2016(4), p. 31-38. ISSN 1425-5960. [Detail]

GRUSHKO, Stefan and Zdenko BOBOVSKÝ. TELEOPERATED HUMANOID ROBOT. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2016, LXII(2), p. 21-28. ISSN 1210-0471. [Detail]

SUDER, Jiří, Zdenko BOBOVSKÝ, Václav KRYS and Tomáš KOT. MODIFICATIONS OF THE MOBILE ROBOTIC SYSTEM CRAWLER. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2016, LXII(2), p. 49-59. ISSN 1210-0471. [Detail]

TŮMA, Jiří, Jiří ŠIMEK, Miroslav MAHDAL, Jaromír ŠKUTA and Renata WAGNEROVÁ. Effects of active vibration control of journal bearings. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2016, 62(2), p. 67-74. ISSN 1210-0471. [Detail]

FRYDRÝŠEK, Karel. SIMPLE STATICALLY INDETERMINATE TRUSS (LINEAR, NONLINEAR AND STOCHASTIC APPROACH). Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2016, LXII(2), p. 7-19. ISSN 1210-0471. [Detail]

ČEP, Robert, Šárka MALOTOVÁ, Marek PAGÁČ, Marek SADÍLEK and Jiří LICHOVNÍK. Parameters Influence of CO2 Laser on Cutting Quality of Polymer Materials. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2016, LXII(1/2016), p. 9-16. ISSN 1210-0471. [Detail]

SCHINDLEROVÁ, Vladimíra, Ivana ŠAJDLEROVÁ and Pavel ZMEŠKAL. Implementation of the Principles of TPM in Field of Maintenance Preparations. Sborník vědeckých prací Vysoké školy báňské-Technické univerzity Ostrava, Řada strojní. VŠB TU Ostrava, 2016, vol. LXII(1), p. 51-57. ISSN 1210-0471. [Detail]

ČECH, Rostislav, Petr HORYL and Pavel MARŠÁLEK. Modelling of Two-Seat Connection to the Frame of Rail Wagon in Terms of Resistance at Impact Test. Strojnícky časopis. Slovenská akademie věd, 2016, 66(02), p. 101-106. ISSN 0039-2472. [Detail]

FRYDRÝŠEK, Karel and Roland JANČO. SIMPLE PLANAR TRUSS (LINEAR, NONLINEAR AND STOCHASTIC APPROACH). Strojnícky časopis. Slovenská akademie věd, 2016, 2(66), p. 5-12. ISSN 0039-2472. [Detail]

VALKOVIČ, Vojtech, Roland JANČO and Karel FRYDRÝŠEK. THE EFFECT OF LANDSLIDE ON GAS PIPELINE. Strojnícky časopis. Slovenská akademie věd, 2016, 2(66), p. 95-100. ISSN 0039-2472. [Detail]

PEER, Václav and Pavel FRIEDEL. Zplyňování – principy a reaktory. TZB-info. Topinfo s.r.o., 2016, p. 1-10. ISSN 1801-4399. [Detail]

FRIEDEL, Pavel and Václav PEER. Nežádoucí látky vznikající při zplyňování. TZB-info. Topinfo s.r.o., 2016, p. 1-8. ISSN 1801-4399. [Detail]

MAREK, Vladislav, Ondřej ŠVEC and Ladislav HRABEC. Monitorování stavu olejových náplní v provozu velkých točivých strojů. Technická diagnostika. Asociace technických diagnostiků ČR, 2016, 25(z1), p. 150-155. ISSN 1210-311X. [Detail]

BRYCHTA, Petr, Marek SADÍLEK and Josef BRYCHTA. The influence of motor skills on measurement accuracy. Technologické inžinierstvo. University of Žilina, 2016, 13(1), p. 22-23. ISSN 1336-5967. [Detail]

VÁVRA, Petr, Marek PENHAKER, Jana JURČÍKOVÁ, Martina ŠKROBÁNKOVÁ, Michal CRHA, Petr OSTRUSZKA, Peter IHNÁT, Jan GREPL, Patricie DELONGOVÁ, Jana DVOŘÁČKOVÁ, Václav PROCHÁZKA, Dana ŠALOUNOVÁ, Miša SKORIČ, Petr RAUŠER, Nagy Adley HABIB and Pavel ZONČA. Semi-spherical Radiofrequency Bipolar Device - A New Technique for Liver Resection: Experimental In Vivo Study on the Porcine Model. Technology in cancer research & treatment. SAGE Publications Inc, 2016, 14(5), p. 573-582. ISSN 1533-0346. [Detail]

MRKVICA, Ivan, Miroslav NESLUSAN, Robert ČEP and Vojtěch SLÉHA. PROPERTIES AND COMPARISON OF PVD COATINGS. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2016, 23(2), p. 569-574. ISSN 1330-3651. [Detail]

SCHMIDOVA, Eva, Ivo HLAVATÝ and Petr HANUS. THE WELDABILITY OF THE STEEL WITH HIGH MANGANESE. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2016, 23(3), p. 749-752. ISSN 1330-3651. [Detail]

LEHOCKA, Dominika, Ivo HLAVATÝ and Sergej HLOCH. RATIONALIZATION OF MATERIAL FLOW IN PRODUCTION OF SEMITRAILER FRAME FOR AUTOMOTIVE INDUSTRY. Tehnički vjesnik – Technical Gazette. University of Osijek, 2016, 4(23), p. 1215-1220. ISSN 1330-3651. [Detail]

CARACH, Jan, Sergej HLOCH, Petr HLAVAEK, Jiri SCUCKA, Petr MARTINEC, Jana PETRŮ, Tomáš ZLÁMAL, Michal ZELENAK, Peter MONKA, Dominika LEHOCKA and Jolanta KROLCZYK. Tangential turning of Incoloy alloy 925 using abrasive water jet technology. The international journal of advanced manufacturing technology. New York: Springer, 2016, 82(9-12), p. 1747-1752. ISSN 0268-3768. [Detail]

HILŠER, Ondřej, Stanislav RUSZ, Radek ČADA, Michal SALAJKA and Jan DUTKIEWICZ. Influence of Severe Plastic Deformation on Mechanical Properties and Structure of Aluminium Alloys. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2016, 62(1), p. 25-37. ISSN 1210-0471. [Detail]

OLIVKOVÁ, Ivana. Evaluation of Quality Public Transport Criteria in Terms of Passenger Satisfaction. Transport and Telecommunication. Transport and Telecommunication Institute, 2016, 17(1), p. 18-27. ISSN 1407-6160. [Detail]

DORDA, Michal and Dušan TEICHMANN. On Two Modifications of Er/Es/1/m Queuing System Subject to Disasters. Acta Polytechnica Hungarica. Budapest Tech, 2015, 12(2), p. 141-158. ISSN 1785-8860. [Detail]

VÁVRA, Petr, Martina ŠKROBÁNKOVÁ, Jan GREPL, Michal CRHA, Marek PENHAKER, Jana JURČÍKOVÁ, Miša ŠKORIČ, Petr RAUŠER, Petr OSTRUSZKA, Peter IHNÁT, Patricie DELONGOVÁ, Jana DVOŘÁČKOVÁ, Václav PROCHÁZKA, Dana ŠALOUNOVÁ, Nagy Adley HABIB and Pavel ZONČA. New semi-spherical radiofrequency energy device for liver resection: An experimental study in pigs. Acta Veterinaria Brno. University of Veterinary and Pharmaceutical Sciences, 2015, 84(4), p. 397-401. ISSN 0001-7213. [Detail]

RUSZ, Stanislav, Lubomír ČÍŽEK, Vít MICHENKA, Jan DUTKIEWICZ, Michal SALAJKA, Ondřej HILŠER, Stanislav TYLŠAR, Jan KEDROŇ and Marcel KLOS. New Type of Device for Achievement of Grain Refinement in Metal Strip. Advanced Materials Research. Trans Tech Publication Ltd, 2015, 1127, p. 91-97. ISSN 1662-8985. [Detail]

SONDEL, Martin, Jaroslav KOUKAL, David SCHWARZ and Drahomír SCHWARZ. Evaluation of Secondary Hardening and Microstructure in the Real T24 Steel Weld Joint. Advanced materials research. Volume 1111. Trans Tech Publications, 2015, 1111(2015), p. 151-156. ISSN 1022-6680. [Detail]

FRYDRÝŠEK, Karel, Günther THEISZ, Lubor BIALY, Luděk PLISKA and Leopold PLEVA. Finite element modelling of T-plate for treatment of distal radius. Advances in Intelligent Systems and Computing. Volume 423. Springer, 2015, p. 1-10. ISSN 2194-5357. [Detail]

FRYDRÝŠEK, Karel. Monte Carlo Probabilistic Approach Applied for Solving Problems in Mining Engineering. Advances in Intelligent Systems and Computing. Volume 423. Springer, 2015, p. 75-85. ISSN 2194-5357. [Detail]

VÍTEČKOVÁ, Miluše, Antonín VÍTEČEK and Kazimierz JARACZ. Control systems for plants with time delay. Annales Universitatis Paedagogicae Cracoviensis. Studia Technica. Wydawnictwo Naukowe Uniwersystetu Pedagogicznego, 2015, 8(1), p. 157-165. ISSN 2081-5468. [Detail]

HÝL, Radim, Renata WAGNEROVÁ and Wiktor HUDY. Design and Realization of Embedded Model Predictive Controller with Software Support. Annales Universitatis Paedagogicae Cracoviensis. Studia Technica. Wydawnictwo Naukowe Uniwersystetu Pedagogicznego, 2015, 8(1), p. 35-44. ISSN 2081-5468. [Detail]

DLOUHÁ, Dagmar, Horst GONDEK and Jiří POKORNÝ. “CUTTING PATTERN” - A PROGRAM FOR ANALYSIS OF CONFIGURATION OF CUTTERS ON A CUTTERHEAD. Aplimat - Journal of Applied Mathematics and Engineerings. Slovak University of Technology, 2015, 6(2014), p. 51-57. ISSN 1337-6365. [Detail]

FOJTÍK, František, Petr FERFECKI and Zbyněk PAŠKA. Computer Aided Evaluation of the Stress Tensor in the Two-Dimensional Photoelasticity. Applied Mechanics and Materials. Trans Tech Publications, 2015, 827(827), p. 185-188. ISSN 1660-9336. [Detail]

MINÁŘ, Jan, Stanislav HONUS, Petr PAVLÍK, Ondřej NĚMČEK, Jaroslav FRANTÍK and Veronika SASSMANOVÁ. Reactor Design for partial Oxidation Using Mathematical Modelling. Applied Mechanics and Materials. Volume 217-219. Trans Tech Publications, 2015, 832(_), p. 95-102. ISSN 1660-9336. [Detail]

HALAMA, Radim, Michal ŠOFER, František FOJTÍK and Alexandros MARKOPOULOS. Experimental and Numerical Study of Uniaxial and Multiaxial Stress-Strain Behaviour of R7T Wheel Steel. Applied Mechanics and Materials. Volume 708. Trans Tech Publications, 2015, 732(2015-02-16), p. 91-94. ISSN 1662-7482. [Detail]

KRYS, Václav, Matěj GALA, Tomáš KOT and Vladimír MOSTÝN. Upgrade of the Drives Control for Omnidirectional Mobile Robot Odin. Applied Mechanics and Materials. Volume 816. Trans Tech Publications, 2015, Neuvedeno(Neuvedeno), p. 282-287. ISSN 1660-9336. [Detail]

KONEČNÝ, Zdeněk, Petr ŠIROKÝ, Václav KRYS and Tomáš KOT. Mobile Chassis on a Modular Principle. Applied Mechanics and Materials. Volume 816. Trans Tech Publications, 2015, Volume 816(november 2015), p. 294-299. ISSN 1660-9336. [Detail]

KONEČNÝ, Zdeněk. Evaluating Methods of the Strength Analyzes Results Realize in PTC Creo/Simulation. Applied Mechanics and Materials. Volume 816. Trans Tech Publications, 2015, Volume 816(november 2015), p. 357-362. ISSN 1660-9336. [Detail]

HILŠER, Ondřej, Stanislav RUSZ, Michal SALAJKA and Lubomír ČÍŽEK. Evaluation of the deep-drawing steel sheets processed by DRECE device. Archives of Materials Science and Engineering. International OCSCO World Press, 2015, 68(1), p. 31-35. ISSN 1897-2764. [Detail]

RUSZ, Stanislav, Andrzej KŁYSZEWSKI, Michal SALAJKA, Ondřej HILŠER, Lubomír ČÍŽEK and Marcel KLOS. Possibilities of Application Methods Drece in Forming of Non-Ferrous Metals. Archives of Metallurgy and Materials. Polish Academy of Sciences, 2015, 60(4), p. 3011-3016. ISSN 1733-3490. [Detail]

ROZBROJ, Jiří, Jiří ZEGZULKA and Jan NEČAS. Use of DEM in the Determination of Friction Parameters on a Physical Comparative Model of a Vertical Screw Conveyor. Chemical and Biochemical Engineering Quarterly. Croatian Society of Chemical Engineers, 2015, 2015(Duben), p. 25-34. ISSN 0352-9568. [Detail]

GRAF, Vojtěch, Dušan TEICHMANN and Michal DORDA. AN EXPERIMENTAL STUDY ON DEPENDENCE OF TIME INTERVALS FOR CONNECTIONS ON OPTIMIZATION COMPUTATIONS FOR TASK OF AIRCRAFT SCHEDULING. Communications. Žilinská univerzita, 2015, 17(2), p. 35-41. ISSN 1335-4205. [Detail]

TULACH, Aleš, Miroslav MYNARZ and Milada KOZUBKOVÁ. Formation of Critical Concentrations of Natural Gas at its Leakage. Communications. Žilinská univerzita, 2015, 17(1), p. 40-45. ISSN 1335-4205. [Detail]

LAPČÍK, Lubomír, Martin VAŠINA, Barbora LAPČÍKOVÁ, Eva OTEPKOVÁ and Kristian WATERS. Investigation of advanced mica powder nanocomposite filler materials: surface energy analysis, powder rheology and sound absorption performance. Composites Part B: Engineering. Elsevier, 2015, 77(August), p. 304-310. ISSN 1359-8368. [Detail]

KUČERA, Radek, Kristina MOTYČKOVÁ and Alexandros MARKOPOULOS. The R-linear convergence rate of an algorithm arising from the semi-smooth Newton method applied to 2D contact problems with friction. Computational Optimization and Applications. Springer, 2015, 61(2), p. 437-461. ISSN 0926-6003. [Detail]

JUCHELKOVÁ, Dagmar, Agnieszka CORSARO, Adéla HLAVSOVÁ and Helena RACLAVSKÁ. Effect of composting on the production of syngas during pyrolysis of perennial grasses. Fuel. Elsevier, 2015, 154(154), p. 380-390. ISSN 0016-2361. [Detail]

VISCONTI, Aleksander, Michele MICCIO and Dagmar JUCHELKOVÁ. An aspen plus tool for simulation of lignocellulosic biomass pyrolysis via equilibrium and ranking of the main process variables. INTERNATIONAL JOURNAL OF MATHEMATICAL MODELS AND METHODS IN APPLIED SCIENCES. North Atlantic University Union, 2015, 2015(Volume 9), p. 71-86. ISSN 1998-0140. [Detail]

ŠOFER, Michal, Radim HALAMA and Rostislav FAJKOŠ. A Semi-Analytical Prediction of Wear Rate of an Inductively Hardened Wheel Steel under Rolling Contact. International Conference on Advanced Engineering Technology (ICAET 2014) : Incheon National University, Incheon, South Korea, 20.-21.12.2014. Trans Tech Publications, 2015, 732(732), p. 131-138. ISSN 1662-7482. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. Vibration Attenuation of an Electromechanical System Coupled with Plate Springs Damped by an Impact Element. International Journal of Applied Mechanics. World Scientific Publishing, 2015, 7(3), p. 1-14. ISSN 1758-8251. [Detail]

ZAPOMĚL, Jaroslav, Vladimír DEKÝŠ, Petr FERFECKI, Alžbeta SAPIETOVÁ, Milan SÁGA and Milan ŽMINDÁK. Identification of Material Damping of a Carbon Composite Bar and Study of Its Effect on Attenuation of Its Transient Lateral Vibrations. International Journal of Applied Mechanics. World Scientific Publishing, 2015, 7(6), p. 1-18. ISSN 1758-8251. [Detail]

VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. 2DOF controller tuning. International Journal of Engineering Research in Africa. Trans Tech Publications, 2015, 18(1), p. 57-64. ISSN 1663-3571. [Detail]

MACHÁČKOVÁ, Adéla, Radim KOCICH, Marian BOJKO and Zuzana KLEČKOVÁ. Numerical analysis of secondary heat exchanger designed for CHP units with microturbine. International Journal of Heat and Mass Transfer. Elsevier, 2015, 83(april 2015), p. 487-498. ISSN 0017-9310. [Detail]

GREGUŠOVÁ, Markéta, Vladimíra SCHINDLEROVÁ, Ivana ŠAJDLEROVÁ, Petr MOHYLA and Jan KEDROŇ. Practical Apllication of Simulation of Business Processes. International Journal of Social, Education, Economics and Management Engineering. World Academy of Science, Engineering and Technology, 2015, 9(2), p. 424-429. ISSN 1307-6892. [Detail]

HLOSTA, Jakub, David ŽUROVEC, Martin ŽÍDEK and Jiří ZEGZULKA. Mechanical Properties of Powdered Coal and Their Influence to Technological Processes. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2015, Volume 15(No 2 (34)), p. 107-112. ISSN 1640-4920. [Detail]

ROZBROJ, Jiří, Jiří ZEGZULKA, Lucie JEZERSKÁ, Jan NEČAS and David ŽUROVEC. The possibility of determining the input parameters for the discrete element method. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2015, Volume 16(No 1 (34)), p. 109-114. ISSN 1640-4920. [Detail]

ŽUROVEC, David, Jakub HLOSTA, Daniel GELNAR and Jiří ZEGZULKA. Aplication of Sorting Processes in the Method DEM. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2015, Volume 15(No 2 (34)), p. 153-158. ISSN 1640-4920. [Detail]

MATÝSEK, Dalibor, Marek KUCBEL, Helena RACLAVSKÁ, Barbora SÝKOROVÁ and Konstantin RACLAVSKÝ. MINERALOGICAL COMPOSITION OF THE TOTAL SUSPENDED PARTICLES IN MORAVIAN-SILESIAN REGION, CZECH REPUBLIC. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2015, 35(2), p. 17-22. ISSN 1640-4920. [Detail]

SÝKOROVÁ, Barbora, Marek KUCBEL, Helena RACLAVSKÁ and Konstantin RACLAVSKÝ. RELATIONSHIP BETWEEN PARTICLE SIZE IN ATMOSPHERIC AEROSOL AND PARTICLE CONCENTRATIONS IN MORAVIAN-SILESIAN REGION, CZECH REPUBLIC. Inżynieria Mineralna. Polskie towarzystwo przeróbki kopalin, 2015, 35(2), p. 195-200. ISSN 1640-4920. [Detail]

JABLONSKÁ, Jana and Milada KOZUBKOVÁ. Methodology of Cavitation Modelling in Diffusers. Journal of Computational Multiphase Flows. Multi-Science Publishing, 2015, 7(2), p. 97-109. ISSN 1757-482X. [Detail]

HIMR, Daniel. Investigation and Numerical Simulation of a Water Hammer with Column Separation. Journal of Hydraulic Engineering. American Society of Civil Engineers, 2015, 141(3), p. 1-8. ISSN 0733-9429. [Detail]

LESŇÁK, Michal, František STANĚK, Ivo HLAVATÝ, Jaromír PIŠTORA and Jan PROCHÁZKA. SPR Method and Its Utilisation for Low Alcohols Concentrations Determination. Journal of Modern Physics. Scientific Research Publishing, 2015, 6(4), p. 363-368. ISSN 2153-120X. [Detail]

OLIVKOVÁ, Ivana. Model for Measuring Passenger Satisfaction and Assessing Mass Transit Quality. Journal of Public Transportation. National Center for Transit Research, 2015, 18(3), p. 52-70. ISSN 1077-291X. [Detail]

HUMMEL, Martin, Ilona HUMMELOVÁ, Jaroslava KOUDELKOVÁ and Kristýna ČERNÁ. Mining of Protection Pillars without Subsidence. Journal of mining science. Springer, 2015, 51(2), p. 335-341. ISSN 1062-7391. [Detail]

MRKVICA, Ivan, Jozef JURKO and Tadeusz ZABOROVSKI. Elementary study of the machinability during drilling of stainless steels X2Cr18Ni8. MECHANIK-Miesiecznik Naukowo-Techniczny. Agenda Wydawnicza SIMP, 2015, 2015(4), p. K111-115. ISSN 0025-6552. [Detail]

MRKVICA, Ivan, Jana PETRŮ, Vojtěch SLÉHA, Miroslav NESLUŠAN, Jozef JUROK and Anton PANDA. Properties of cutting inserts with different PVD coatings. MM Science Journal. MM Publishing, 2015, 2015(June), p. 600-603. ISSN 1803-1269. [Detail]

HRUŽÍK, Lumír, Adam BUREČEK, Martin VAŠINA and Ondřej BÍLEK. Non-Destructive Experimental Method for Determination of Modulus of Elasticity of Hydraulic Hoses. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2015, 15(3), p. 344-350. ISSN 1213-2489. [Detail]

PETRŮ, Jana, Jan SCHIFFNER, Tomáš ZLÁMAL, Marek SADÍLEK and Dana STANČEKOVÁ. Investigations of Cutting Tool Wear While Machining Inconel 718. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2015, 15(3), p. 396-403. ISSN 1213-2489. [Detail]

STANČEKOVÁ, Dana, Ján ŠEMCER, Anna RUDAWSKA and Robert ČEP. Identification of drilling of biocompatible materials based on titanium. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2015, 15(4), p. 699-704. ISSN 1213-2489. [Detail]

DOBEŠ, Josef and Milada KOZUBKOVÁ. The Numerical Solution of the Aerodynamic Task Using by CFD Modelling. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2015, Volume 15(No. 5), p. 788-795. ISSN 1213-2489. [Detail]

HRUBÝ, Jiří, Vladimíra SCHINDLEROVÁ and Josef RENTKA. Degradation Processes in the Contact Layers of Forming Tools. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2015, 15(5), p. 836-842. ISSN 1213-2489. [Detail]

ČILIKOVÁ, Mária, Branislav MIČIETA, Miroslav NESLUŠAN, Robert ČEP, Ivan MRKVICA, Jana PETRŮ and Tomáš ZLÁMAL. Prediction of the catastrophic tool failure in hard turning through acoustic emission. Materiali in tehnologije. Inštitut za kovinske materiale in tehnologije, 2015, 49(3), p. 355-363. ISSN 1580-2949. [Detail]

TAŃSKI, Tomasz, Mariusz KRÓL, Przemysław SNOPIŃSKI, Marek ROSZAK, Stanislav RUSZ and Peter PALČEK. Thermal and structure analysis of the aluminium ENAC-AlMg5Si2Mn alloy. Materials Engineering. Strojnícka fakulta Žilinskej Univerzity, 2015, 22(4), p. 54-66. ISSN 1335-0803. [Detail]

MARŠÁL, Robert, Jitka PODJUKLOVÁ, René SIOSTRZONEK, Daniela PAVELKOVÁ, Lenka KOLDOVÁ and Zdeněk PĚNIČKA. CORROSION OF DRY - BOTTOM BOILER EVAPORATOR IN POWER INDUSTRY. Materials Science Forum. Trans Tech Publications, 2015, 818(May 2015), p. 129-132. ISSN 1662-9752. [Detail]

SIOSTRZONEK, René, Daniela PAVELKOVÁ, Lenka KOLDOVÁ, Jitka PODJUKLOVÁ and Petr STRZYŽ. CORROSION PROTECTION OF STRUCTURAL STEELWORK BY A DUPLEX COATING SYSTEM. Materials Science Forum. Trans Tech Publications, 2015, 818(May 2015), p. 162-166. ISSN 1662-9752. [Detail]

HANÁK, Miroslav, Jitka PODJUKLOVÁ, René SIOSTRZONEK, Daniela PAVELKOVÁ and Lenka KOLDOVÁ. THE INFLUENCE OF SUBSTRATE SURFACE CLEANLINESS ON THE CORROSION RESISTANCE OF COATING SYSTEMS. Materials Science Forum. Trans Tech Publications, 2015, 818(May 2015), p. 167-170. ISSN 1662-9752. [Detail]

PAVELKOVÁ, Daniela, Lenka KOLDOVÁ, Jitka PODJUKLOVÁ, René SIOSTRZONEK, Zdeněk PĚNIČKA and Vladimír MENSHIKOV. SHORT-TERM CORROSION PROTECTION MATERIALS USING NANOCOATINGS. Materials Science Forum. Trans Tech Publications, 2015, 818(May 2015), p. 89-92. ISSN 1662-9752. [Detail]

KOCICH, Radim, Adéla MACHÁČKOVÁ, Lenka KUNČICKÁ and František FOJTÍK. Fabrication and characterization of cold-swaged multilayered Al-Cu clad composites. Materials and Design. Elsevier, 2015, 71(APR 15 2015), p. 36-47. ISSN 0261-3069. [Detail]

TEICHMANN, Dušan, Michal DORDA, Karel GOLC and Helena BÍNOVÁ. Locomotive Assignment Problem with Heterogeneous Vehicle Fleet and Hiring External Locomotives. Mathematical Problems in Engineering. Hindawi, 2015, 2015(january 2015), p. 1 - 7. ISSN 1024-123X. [Detail]

MRKVICA, Ivan, Miroslav NESLUŠAN, Anna MIČIETOVÁ, Mária ČILLIKOVÁ and Branislav MIČIETA. Detection of tool breakage during hard turning through acoustic emission at low removal rates. Measurement. Elsevier, 2015, 70(1), p. 1-13. ISSN 0263-2241. [Detail]

HRABOVSKÝ, Leopold. Kontinuální dopravní zařízení - pásový dopravník s krycím pásem. Perners Contact. Univerzita Pardubice, 2015, X(1), p. 48 - 57. ISSN 1801-674X. [Detail]

SÝKOROVÁ, Barbora, Marek KUCBEL and Konstantin RACLAVSKÝ. Composition of airborne particulate matter in the industrial area versus mountain area. Perspectives in Science. Elsevier, 2015, 7(1), p. 186-190. ISBN 0-000-00000-0. [Detail]

PODEŠVA, Jiří and Zdeněk PORUBA. The Stirling engine mechanism optimization. Perspectives in Science. Elsevier, 2015, 7(C), p. 341-346. ISBN 0-000-00000-0. [Detail]

PORUBA, Zdeněk, Jiří PODEŠVA, Ondřej FRANTIŠEK, Martin FUSEK, Robert BRÁZDA and Marek SADÍLEK. Strength Analysis and Optimization of Welding Robot Mechanism in Emergency Stop State. Perspectives in Science. Elsevier, 2015, 7C(December 2015), p. 347-352. ISBN 0-000-00000-0. [Detail]

HALAMA, Radim, Josef SEDLÁK, Martin FUSEK and Zdeněk PORUBA. Uniaxial and biaxial ratcheting of ST52 steel under variable amplitude loading – experiments and modeling. Procedia Engineering. Elsevier, 2015, 101, p. 185 – 193. ISSN 1877-7058. [Detail]

TEICHMANN, Dušan, Michal DORDA, Helena BÍNOVÁ and Martin LUDVÍK. OPTIMIZATION OF PARKING PUBLIC TRANSPORT VEHICLES IN OSTRAVA. Promet - Traffic - Traffico. Faculty of Transport and Traffic Sciences, University of Zagreb, 2015, 27(1), p. 69-75. ISSN 0353-5320. [Detail]

BUREČEK, Adam, Lumír HRUŽÍK and Martin VAŠINA. Determination of Undissolved Air Content in Oil by Means of a Compression Method. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING. ASSOC MECHANICAL ENGINEERS TECHNICIANS SLOVENIA, 2015, 61(7-8), p. 477-485. ISSN 0039-2480. [Detail]

VÍTEČKOVÁ, Miluše and Antonín VÍTEČEK. Robustní řízení mechanických systémů. STROJÁRSTVO. MEDIA/ST s.r.o., 2015, 19(7), p. 84-86. ISSN 1335-2938. [Detail]

SLADKÁ, Karla and Marek BABIUCH. .Net Gadgeteer Application Development Using Wireless Communications. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2015, 61(2), p. 43-51. ISSN 1210-0471. [Detail]

BARANOVÁ, Vladena, Lenka LANDRYOVÁ and Jozef FUTÓ. From monitored values to the model creation of the dynamic system. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Vysoká škola báňská - Technická univerzita Ostrava, 2015, 61(2), p. 9-15. ISSN 1210-0471. [Detail]

MICHENKOVÁ, Šárka and Karel FRYDRÝŠEK. New model and application of elastic foundations in a tangential direction. Scientific proceedings 2015. Slovenská technická univerzita, 2015, p. 85-90. ISSN 1338-1954. [Detail]

PUSTĚJOVSKÁ, Pavlína, Jiří TŮMA, Vladimír STANĚK, Jiří KŘIŠŤÁL, Simona JURSOVÁ and Jiří BILÍK. Using a Mathematical Model of Counter‐Current Flow in a Blast Furnace to Evaluate Reducibility of Iron‐Ore‐Bearing Raw Materials. Steel research international. Verlag Stahleisen GmbH, 2015, 86(4), p. 320-328. ISSN 1611-3683. [Detail]

LAJCZYKOVÁ, Markéta, Jaroslav KOUKAL and Martin SONDEL. Zákonné povinnosti, kvalifikační a technické požadavky na výrobce stavebních konstrukcí podle EN 1090-1 A1. Svět svaru. Hadyna International s.r.o., 2015, 3(2015), p. 21-28. ISSN 1214-4983. [Detail]

CHYTKA, Petr and Ladislav HRABEC. Testování motorů automobilů na základě nejnovějších předpisů WLTP a vliv na testy motorového oleje. Technická diagnostika. Asociace technických diagnostiků ČR, 2015, 24(z1), p. 81-88. ISSN 1210-311X. [Detail]

TICHÁ, Šárka and Jan BOTEK. THE MODERN MEASUREMENT TECHNOLOGY AND CHECKING OF SHAFTS PARAMETERS. Technologické inžinierstvo. University of Žilina, 2015, Volume XII(2/2015), p. 28-30. ISSN 1336-5967. [Detail]

HLAVATÝ, Ivo, Jindřich KOZÁK, Lucie KREJČÍ and Ivan SAMARDŽIĆ. The Effect of Tungsten Carbide Participles Content in Weld Deposit on its Abrasion Resistance. Tehnički vjesnik – Technical Gazette. University of Osijek, 2015, 23(03/2016), p. 25-31. ISSN 1330-3651. [Detail]

RADVANSKÁ, Agáta, Pavol HREHA, Lucia KNAPČÍKOVÁ, Jana PETRŮ, Tomáš ZLÁMAL and Peter MONKA. Influence of focusing tube wear on vibrations and surface roughness. Tehnički vjesnik – Technical Gazette. University of Osijek, 2015, 22(2), p. 270-278. ISSN 1330-3651. [Detail]

RADVANSKÁ, Agáta, Jana PETRŮ, Katarína MONKOVÁ, Tomáš ZLÁMAL, Pavol HREHA, Matej ŠOMŠÁK, Andrej ANDREJ and Branimir ŠAFRAN. Rationalization of manufacturing of plastic injection moulds by abrasive waterjet. Tehnički vjesnik – Technical Gazette. University of Osijek, 2015, 22(2), p. 521-525. ISSN 1330-3651. [Detail]

SADÍLEK, Marek, František FOJTÍK, Zuzana SADÍLKOVÁ, Kamil KOLAŘÍK and Jana PETRŮ. A STUDY OF EFFECTS OF CHANGING THE POSITION OF THE TOOL AXIS TO THE MACHINED SURFACE. Transactions of Famena. University of Zagreb, 2015, 39(2), p. 33-46. ISSN 1333-1124. [Detail]

CHYTKA, Petr and Ladislav HRABEC. Testování motorů automobilů na základě nejnovějších předpisů WLTP a vliv na testy motorového oleje. Tribotechnika. Techpark, o.z., 2015, 8(2), p. 44-47. ISSN 1338-0524. [Detail]

TULACH, Aleš, Miroslav MYNARZ, Petr LEPÍK and Milada KOZUBKOVÁ. The possibilities to determine critical concentrations of gas in buildings. Vytápění, větrání, instalace. Společnost pro techniku prostředí, 2015, 24(4), p. 198-202. ISSN 1210-1389. [Detail]

POHLUDKA, Tomáš and František HELEBRANT. Specializační vzdělávání v oboru technická diagnostika TRIBODIAGNOSTIKA. Řízení & údržba průmyslového podniku. Trade Media International s. r. o., 2015, 3(září 2015), p. 8-9. ISSN 1803-4535. [Detail]

ZAVILA, Ondřej, Marian BOJKO, Milada KOZUBKOVÁ, Pavel DANIHELKA, Barbora BAUDIŠOVÁ, Lenka MALÉŘOVÁ and Mária ČARNOGURSKÁ. CFD Analysis of the Influence of Meteorological Conditions on Motion of Ammonia. Acta Mechanica Slovaca. Košice: Technická univerzita Košice, 2014, 18(1), p. 64-70. ISSN 1335-2393. [Detail]

KADLEC, Zdeněk and Miloš KVARČÁK. Efficiency of water curtains. Advanced Materials Research. Trans Tech Publication Ltd, 2014, 1057(2014), p. 147-154. ISSN 1022-6680. [Detail]

HONUS, Stanislav and Dagmar JUCHELKOVÁ. Influence of Input Material Kind on Thermic System Furnace Efficiency. Advanced Materials Research. Trans Tech Publication Ltd, 2014, 875-877( 2014), p. 1716-1722. ISSN 1022-6680. [Detail]

KADLEC, Zdeněk, Miloš KVARČÁK, Adam THOMITZEK and Martin TRČKA. Determining of damages caused by fire on photovoltaic power stations. Advanced Materials Research. Trans Tech Publication Ltd, 2014, 1001(2014), p. 282-287. ISSN 1022-6680. [Detail]

SÝKOROVÁ, Barbora, Marek KUCBEL, Helena RACLAVSKÁ and Konstantin RACLAVSKÝ. The evaluation of the concentration of benzo(a)pyrene in the air of Moravian-silesian region (Czech Republic) during winter and summer seasons. Advanced Materials Research. Trans Tech Publication Ltd, 2014, 1088(January 2015), p. 562-568. ISSN 1022-6680. [Detail]

KUCHAŘOVÁ, Jana, Helena RACLAVSKÁ, Agnieszka CORSARO and Konstantin RACLAVSKÝ. Characterization of organic matter released during analytical pyrolysis of PM10 samples obtained from biomass and oil combustion. Advanced Materials Research. Trans Tech Publication Ltd, 2014, 926-930(May 2014), p. 7-12. ISSN 1022-6680. [Detail]

BOREK, Wojciech, Małgorzata CZAJA, Krzyszfof Marek LABISZ, Tomasz TAŃSKI, Mariusz KRUPIŃSKI and Stanislav RUSZ. High manganese austenitic X6MnSiAlNbTi26-3-3 steel - characteristic, Structures and Properties. Advanced Materials Research. Volume 1036. Trans Tech Publications, 2014, 1036, p. 18-23. ISSN 1022-6680. [Detail]

HLAVSOVÁ, Adéla, Agnieszka CORSARO and Helena RACLAVSKÁ. Investigation of the Effects of Hygienization and Moisture Content of Sewage Sludge on Pyrolysis Products. Advanced Materials Research. Volume 926-930. Enfield, New Hampshire, USA: Trans Tech Publications, 2014, 926-930(May 2014), p. 4263-4271. ISSN 1022-6680. [Detail]

KOVAĽ, Lukáš and Jarmila DROZDOVÁ. Optimal Number of Contact Angle Measurements on Pyrite Surface. Advanced Materials Research. Volume 926-930. Trans Tech Publications, 2014, 1(17), p. 17-21. ISSN 1022-6680. [Detail]

KUČERA, Radek, Tomáš KOZUBEK, Alexandros MARKOPOULOS, Jaroslav HASLINGER and Lukáš MOCEK. Projected Krylov methods for solving non-symmetric two-by-two block linear systems arising from fictitious domain formulations. Advances in Electrical and Electronic Engineering. VŠB - Technical University of Ostrava, 2014, 12(2), p. 131-143. ISSN 1336-1376. [Detail]

HEJDUK, Stanislav, Karel WITAS, Jan LÁTAL, Jan VITÁSEK, Jiří BOCHEZA and Vladimír VAŠINEK. Simple and universal current modulator circuit for indoor mobile free-space-optical communications testing. Advances in Electrical and Electronic Engineering. VŠB - Technical University of Ostrava, 2014, 12(1), p. 66-74. ISSN 1336-1376. [Detail]

HLAVATÝ, Ivo. Technické vzdělání na Fakultě strojní VŠB - TU Ostrava versus praxe. All For Power. Konstrukce Media, s.r.o., 2014, 8(3), p. 74-76. ISSN 1802-8535. [Detail]

JOBBÁGY, Boris, Dušan ŠIMŠÍK, Jiří MAREK, Ján KARCHŇÁK and Daniela ONOFREJOVÁ. Robotic Exoskeleton for Rehabilitation of the Upper Limb. American Journal of Mechanical Engineering. Science and Education Publishing, 2014, 2(7), p. 299-302. ISSN 2328-4102. [Detail]

VÍTEČKOVÁ, Miluše, Antonín VÍTEČEK and Kazimierz JARACZ. Uproszczony dobór okresu próbkowania. Annales Universitatis Paedagogicae Cracoviensis. Studia Technica. 2014, 7(158), p. 145-150. ISSN 2081-5468. [Detail]

VIRGALA, Ivan, Miroslav DOVICA, Michal KELEMEN, Erik PRADA and Zdenko BOBOVSKÝ. Snake robot movement in the pipe using concertina locomotion. Applied Mechanics and Materials. Trans Tech Publications, 2014, 2014(Volume 611), p. 121-129. ISSN 1660-9336. [Detail]

LESŇÁK, Michal, Jan PROCHÁZKA, Ivo HLAVATÝ, Jaromír PIŠTORA and Gabriela KOSTIUKOVÁ. Study of Steel Wire Ropes Defects. Applied Mechanics and Materials. Trans Tech Publications, 2014, 683(Neuvedeno), p. 55-60. ISSN 1660-9336. [Detail]

HUSÁKOVÁ, Nikoleta and Stanislav HONUS. Reverse Material Flow of Worn-Out Conveyor Belts. Applied Mechanics and Materials. Volume 217-219. Trans Tech Publications, 2014, 608(2014), p. 183-188. ISSN 1660-9336. [Detail]

HONUS, Stanislav and Przemyslaw BUKOWSKI. Maintenance Study of A Pilot Biomass Pyrolysis Installation. Applied Mechanics and Materials. Volume 217-219. Trans Tech Publications, 2014, 496-500(2014), p. 947-952. ISSN 1660-9336. [Detail]

GONDEK, Horst, Jiří NERUDA and Jiří POKORNÝ. The Dynamics of Impacts Tools the Loading Boom Bucket Wheel Excavators. Applied Mechanics and Materials. Volume 683. Trans Tech Publications, 2014, 683(2014), p. 213-218. ISSN 1660-9336. [Detail]

FRYDRÝŠEK, Karel, Šárka MICHENKOVÁ and Marek NIKODÝM. Straight Beams Rested on Nonlinear Elastic Foundations – Part 1 (Theory, Experiments, Numerical Approach). Applied Mechanics and Materials. Volume 684. Trans Tech Publications, 2014, 732(16.09.2014), p. 11-20. ISSN 1660-9336. [Detail]

MICHENKOVÁ, Šárka, Karel FRYDRÝŠEK and Marek NIKODÝM. Straight Beams Rested on Nonlinear Elastic Foundations – Part 2 (Numerical Solutions, Results and Evaluation). Applied Mechanics and Materials. Volume 684. Trans Tech Publications, 2014, 16.09.2014(684), p. 21-29. ISSN 1660-9336. [Detail]

FRYDRÝŠEK, Karel, Martin MAŤAS and Pavol NOVÁK. Analysis of Sealing Properties on a Bolted Joint Based on Probability. Applied Mechanics and Materials. Volume 684. Trans Tech Publications, 2014, p. 279-285. ISSN 1660-9336. [Detail]

FRYDRÝŠEK, Karel and Luboš PEČENKA. Probabilistic Evaluation of Residual Stresses for Hole-Drilling Tests. Applied Mechanics and Materials. Volume 684. Trans Tech Publications, 2014, 16.09.2014(684), p. 400-406. ISSN 1660-9336. [Detail]

KLUČKA, Richard, Karel FRYDRÝŠEK and Miroslav MAHDAL. Measuring the Deflection of a Circular Plate on an Elastic Foundation and Comparison with Analytical and FE Approaches. Applied Mechanics and Materials. Volume 684. Trans Tech Publications, 2014, p. 407-412. ISSN 1660-9336. [Detail]

GREPL, Jan, Karel FRYDRÝŠEK and Marek PENHAKER. Probabilistic Model of the Interaction between a Sitting Man and a Seat. Applied Mechanics and Materials. Volume 684. Trans Tech Publications, 2014, p. 413-419. ISSN 1660-9336. [Detail]

FRYDRÝŠEK, Karel, František FOJTÍK, Oldřich UČEŇ, Günther THEISZ, Ječmínek VLADIMÍR, Vojtěch BAJTEK, Karla ČECH BARABASZOVÁ, Kateřina DĚDKOVÁ and Jana KUKUTSCHOVÁ. About the Verification of External Fixators Applied in Traumatology and Orthopaedics. Applied Mechanics and Materials. Volume 752-753. Trans Tech Publication Ltd, 2014, 732, p. 153-160. ISSN 1660-9336. [Detail]

TAŃSKI, Tomasz, Leszek DOBRZAŃSKI, Stanislav RUSZ, Wojciech MATYSIAK and Martin KRAUS. Characteristic features of fine-grained coatings deposited on magnesium alloys. Archives of Materials Science and Engineering. International OCSCO World Press, 2014, 66(1), p. 13-20. ISSN 1897-2764. [Detail]

OCHODEK, Vladislav and Pavel BOXAN. Weldability of carbon steel processed by multiple plastic deformation. Archives of Materials Science and Engineering. International OCSCO World Press, 2014, 69(2), p. 88-93. ISSN 1897-2764. [Detail]

RUSZ, Stanislav, Michal SALAJKA, Lubomír ČÍŽEK, Stanislav TYLŠAR, Jan KEDROŇ, Vít MICHENKA, Tibor DONIČ, Eugenius HADASIK and Marcel KLOS. Ultrafine grain refinement of AlMn1Cu and AZ31 alloys by SPD process. Archives of Metallurgy and Materials. Kraków: Polish Academy of Sciences, 2014, 59(1), p. 359-364. ISSN 1733-3490. [Detail]

VÁVRA, Petr, Marek PENHAKER, Jan GREPL, Jana JURČÍKOVÁ, Jiří PALEČEK, Michal CRHA, Jana NOWAKOVÁ, Martin HASAL, Martina ŠKROBÁNKOVÁ, Petr OSTRUSZKA, Peter IHNAT, Patricie DELONGOVÁ, Dana ŠALOUNOVÁ, Nagy A. HABIB and Pavel ZONČA. Technical Development of a New Semispherical Radiofrequency Bipolar Device (RONJA): Ex Vivo and In Vivo Studies. BIOMED RESEARCH INTERNATIONAL. Hindawi Publishing Corporation, 2014, 2014(532792), p. 1-7. ISSN 2314-6133. [Detail]

LIČEV, Lačezar, Michal KRUMNIKL, Jaromír ŠKUTA, Marek BABIUCH and Radim FARANA. ADVANCES IN DEVELOPMENT OF IMAGING DEVICE FOR PLAQUE MEASUREMENT IN AREA OF CAROTID ARTERY. Biotechnology and Biotechnological Equipment. Diagnosis Press Limited, 2014, 28(2), p. 355-359. ISSN 1310-2818. [Detail]

LIČEV, Lačezar, Jan TOMEČEK and Radim FARANA. Adjusting the input ultrasound image data and the atherosclerotic plaque detection in the carotid artery by the FOTOM-NG system. Biotechnology and Biotechnological Equipment. Diagnosis Press Limited, 2014, 28(3), p. 567-575. ISSN 1310-2818. [Detail]

HONUS, Stanislav, Veronika SASSMANOVÁ, Jaroslav FRANTÍK, Przemyslaw BUKOWSKI and Dagmar JUCHELKOVÁ. Energy Balance Sheet of Semioperational Thermic System. Chemical and Process Engineering. Polish Academy of Sciences, 2014, 35(3), p. 317-329. ISSN 0208-6425. [Detail]

KOLAT, Pavel, Bohumír ČECH, Mojmír VRTEK and David TOMÁŠEK. Experiments on additive desulphurisation by sodium bicarbonate in coal-fuel boilers. Chemical and Process Engineering. Polish Academy of Sciences, 2014, 1(34), p. 77-86. ISSN 0208-6425. [Detail]

FRIES, Jiří. BELT SLIPPAGE ON DRIVE DRUMS OF BELT CONVEYORS. Ciencia e Tecnica Vitivinicola. Estacao vitivinicola nacional, 2014, 29(7), p. 2-7. ISSN 0254-0223. [Detail]

FRIES, Jiří. FUNCTIONALITY DETERMINATION BY THE ANALYTICAL CALCULATION. Ciencia e Tecnica Vitivinicola. Estacao vitivinicola nacional, 2014, 29(8), p. 72-79. ISSN 0254-0223. [Detail]

KOZUBKOVÁ, Milada, Jaroslav KRUTIL and Václav NEVRLÝ. Experiments and mathematical models of methane flames and explosions in a complex geometry. Combustion, Explosion, and Shock Waves. Springer New York, Berlin, Heidelberg, Barcelona, Hong Kong, 2014, 50(4), p. 374-380. ISSN 0010-5082. [Detail]

KUMIČÁKOVÁ, Darina and Zdeněk KONEČNÝ. Approach to the Problem of Bio-Inspired Robotic Gripper Designing. Communications. Žilinská univerzita, 2014, 16(3A/2014), p. 148-153. ISSN 1335-4205. [Detail]

HRBÁČ, Roman, Tomáš MLČÁK, Václav KOLÁŘ and Jan NEČAS. Estimation of On-Fly Phase Resistance of on 8/6 Switched Reluctance Motor for Sensorless Control. Elektronika ir elektrotechnika. Kaunas: Kaunas University of Technology, 2014, 20(5), p. 15-20. ISSN 1392-1215. [Detail]

FRYDRÝŠEK, Karel, Leopold PLEVA, Martin POMPACH, Oldřich UČEŇ, František FOJTÍK, Tomáš KUBÍN, Günther THEISZ, Luboš ŽILKA and Zdeněk PORUBA. External and Internal Fixators for Treatment of Complicated Fractures in Traumatology and Orthopaedics. Engineering Mechanics 2014 : 20th international conference : May 12-15, 2014, Svratka, Czech Republic : book of full texts. Brno: Brno University of Technology, 2014, 1(2014), p. 180-183. ISBN 978-80-214-4871-1. [Detail]

TARABA, Boleslav, Zdeněk MICHALEC, Vladimíra MICHALCOVÁ, Tomáš BLEJCHAŘ, Marian BOJKO and Milada KOZUBKOVÁ. CFD simulations of the effect of wind on the spontaneous heating of coal stockpiles. Fuel. Elsevier, 2014, 118(1), p. 107-112. ISSN 0016-2361. [Detail]

RACLAVSKÁ, Helena, Agnieszka CORSARO, Dagmar JUCHELKOVÁ, Veronika SASSMANOVÁ and Jaroslav FRANTÍK. Effect of temperature on the enrichment and volatility of 18 elements during pyrolysis of biomass, coal, and tires. Fuel Processing Technology. Elsevier, 2014, 131(December 2014), p. 330-337. ISSN 0378-3820. [Detail]

DLOUHÁ, Dagmar and Horst GONDEK. Utilisation of the Simulated Annealing Method for optimisation of configuration of cutters on the cutterhead. Global Journal for Research analysis. Ahmedabad: Global Journal for Research analysis, 2014, 3(1), p. 56-57. ISSN 2277-8160. [Detail]

VONTOROVÁ, Jiřina and Petr MOHYLA. Studium zinkové vrstvy na plechu po tepelném ovlivnění pájením. Hutnické listy. Ocelot, 2014, 67(6), p. 67-72. ISSN 0018-8069. [Detail]

LAMPART, Marek and Jaroslav ZAPOMĚL. Dynamic properties of the electromechanical system damped by an impact element with soft stops. International Journal of Applied Mechanics. World Scientific Publishing, 2014, 6(2), p. 1-17. ISSN 1758-8251. [Detail]

ZAPOMĚL, Jaroslav, Petr FERFECKI and Forte FORTE. ANALYSIS OF THE STEADY STATE UNBALANCE RESPONSE OF RIGID ROTORS ON MAGNETORHEOLOGICAL DAMPERS: STABILITY, FORCE TRANSMISSION AND ENERGY DISSIPATION. International Journal of Applied Mechanics. World Scientific Publishing, 2014, 6(3), p. 1-21. ISSN 1758-8251. [Detail]

STŘIŽÍK, Michal, Zdeněk ZELINGER, Václav NEVRLÝ, Pavel KUBÁT, Pavel BERGER, Alexandr ČERNÝ, Pavel ENGST, Petr BITALA, Radmila JANEČKOVÁ, Eva GRIGOROVÁ, Iva BESTOVÁ, Jan ČADIL, Pavel DANIHELKA, Petr KADEŘÁBEK, Milada KOZUBKOVÁ, Sylva DRÁBKOVÁ, David HARTMAN, Marian BOJKO and Ondřej ZAVILA. CFD modelling for atmospheric pollutants/aerosols studies within the complex terrains of urban areas and industrial sites. International Journal of Environment and Pollution. Inderscience Enterprises Limited, 2014, 54(1), p. 73-90. ISSN 0957-4352. [Detail]

HUSSEIN, Eslam, Pavel KOLAT and Amer RAMADAN. Experimental Investigation On Reducing Warm Infiltrated Air Through Cold Stores Entrances Using Plastic Strip Curtains. International Journal of Innovative Research in Science, Engineering and Technology. IJIRSET, 2014, 3(3), p. 9902-9911. ISSN 2319-8753. [Detail]

PETRŮ, Jana, Tomáš ZLÁMAL, Robert ČEP and Lenka ČEPOVÁ. Technology of Thermal Spray Coating Machining. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering. Amsterdam: World Academy of Science, Engineering and Technology, 2014, 86(1), p. 854-857. ISSN 1307-6892. [Detail]

HLAVSOVÁ, Adéla, Agnieszka CORSARO, Helena RACLAVSKÁ and Dagmar JUCHELKOVÁ. The effects of varying CaO content and rehydration treatment on the composition, yield, and evolution of gaseous products from the pyrolysis of sewage sludge. Journal of Analytical and Applied Pyrolysis. New York: Elsevier Science, 2014, 108(July 2014), p. 160-169. ISSN 0165-2370. [Detail]

HONUS, Stanislav, Dagmar JUCHELKOVÁ, Adam CAMPEN and Tomasz WILTOWSKI. Gaseous Components from Pyrolysis - Characteristics, Production and Potential for Energy Utilization. Journal of Analytical and Applied Pyrolysis. Elsevier Science, 2014, 106(March 2014), p. 1-8. ISSN 0165-2370. [Detail]

LIČEV, Lačezar, Radim FARANA, Michál BAR, Martin ROUBEC, Hana TOMÁŠKOVÁ and David ŠKOLOUDIK. Inter-Rater Reliability of Carotid Atherosclerotic Plaque Quantification by 3-Dimensional Sonography. Journal of Ultrasound in Medicine. American Institute of Ultrasound in Medicine, 2014, 33(7), p. 1273-1278. ISSN 0278-4297. [Detail]

JONŠTA, Petr, Petr MARŠÁLEK, Jiří HAVLÍK, Zdeněk JONŠTA and Jan VALÍČEK. Influence of Spur Gears Hardened Method to Allowable Stress Numbers for Bending. Key Engineering Materials. Vol. 607. Zürich: Trans Tech Publication Ltd, 2014, p. 11-14. ISSN 1013-9826. [Detail]

ČEP, Robert, Adam JANÁSEK, Jana PETRŮ, Marek SADÍLEK, Petr MOHYLA, Jan VALÍČEK, Marta HARNIČÁROVÁ and Andrej CZAN. Surface roughness after machining and influence of feed rate on process. Key engineering materials. Volume 581. Trans Tech Publications, 2014, 581(1), p. 341-347. ISSN 1013-9826. [Detail]

MARKOPOULOS, Alexandros, Zdeněk DOSTÁL, Tomáš KOZUBEK, Petr KOVÁŘ, Tomáš BRZOBOHATÝ and Radek KUČERA. Stable computations of generalized inverses of positive semidefinite matrices. Lecture notes in computational sciences and engineering. Springer, 2014, 98(1), p. 909-916. ISSN 1439-7358. [Detail]

MARTINEC, František. Safety and Security in airplane – Safety and Security policy in Airlines. Logistics and Transport. Wrocław: The International University of Logistics and Transport in Wrocław, 2014, 21(1), p. 79-84. ISSN 1734-2015. [Detail]

KOURIL, Karel, Robert ČEP, Adam JANÁSEK, Antonin KRIZ and Dana STANCEKOVA. Surface Integrity at Reaming Operation by MT3 Head. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2014, 14(2), p. 193-199. ISSN 1213-2489. [Detail]

KONAR, Radoslav, Miloš MIČIAN and Ivo HLAVATÝ. Defect detection in pipelines during operation using magnetic flux leakage and phased array ultrasonic method. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2014, 14(3), p. 337-341. ISSN 1213-2489. [Detail]

BÍLEK, Ondřej, Martin VAŠINA and Martin VAŠINA. CNC Milling and Manufacturing of Groove Shapes for Light Reflection Measurement. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2014, 14(4), p. 516-522. ISSN 1213-2489. [Detail]

KYNCL, Ladislav, Marek SADÍLEK, Robert ČEP, Jana PETRŮ, Dana STANČEKOVÁ, Josef PROCHÁZKA and Pavel NOVÁČEK. Tests of drills during drilling holes into alloy wheels. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2014, 14(4), p. 554-561. ISSN 1213-2489. [Detail]

PETRŮ, Jana, Tomáš ZLÁMAL, Ivan MRKVICA and Robert ČEP. The effect of thermal shocks on wear of exchangeable sintered carbide inserts during the cutting process. Manufacturing Technology. Univerzita Jana Evangelisty Purkyně, 2014, 14(4), p. 590-596. ISSN 1213-2489. [Detail]

MOHYLA, Petr, Zdeněk KUBOŇ, Robert ČEP and Ivan SAMARDZIC. Evaluation of Creep Properties of Steel P92 and its Welded Joint. Metalurgija. Hrvatsko metalurško društvo (HMD), 2014, 53(2), p. 175-178. ISSN 0543-5846. [Detail]

MOHYLA, Petr, Zdeněk KUBOŇ, Robert ČEP, Adam JANÁSEK and Ivan SAMARDZIC. Secondary Hardening of Low-Alloyed Creep-Resistant Steel Welds. Metalurgija. Hrvatsko metalurško društvo (HMD), 2014, 53(1), p. 25-28. ISSN 0543-5846. [Detail]

HLOCH, Sergej, Jiří HLAVÁČEK, Karol VASILKO, Ján CARÁCH, Ivan SAMARDŽĆ, Dražan KOZAK, Ivo HLAVATÝ, Jiří ŠČUČKA, Jiří KLICH and Dagmar KLICHOVÁ. Abrasive WaterJet (AWJ) Titanium Tangential Turning Evaluation. Metalurgija. Hrvatsko metalurško društvo (HMD), 2014, 53(4), p. 537-540. ISSN 0543-5846. [Detail]

ZAVILA, Ondřej, Marian BOJKO, Milada KOZUBKOVÁ, Pavel DANIHELKA and Lenka MALÉŘOVÁ. Vliv meteorologických podmínek na rozptyl plynného NH3 při havarijním úniku v městské zástavbě. Meteorologické zprávy. Praha: Český hydrometeorologický ústav, 2014, 67(5), p. 135-140. ISSN 0026-1173. [Detail]

RUSZ, Stanislav, Lubomír ČÍŽEK, Jan DUTKIEWICZ, Stanislav TYLŠAR, Michal SALAJKA, Václav DIVIN, Jan KEDROŇ and Marcel KLOS. Rozdrobnienie ziarna stopu AlMn1Cu przez duże odkształcenie plastyczne (SPD). Obrobka Plastyczna Metali. Institut obrobki plastycznej v Poznani, 2014, 25(2), p. 1-12. ISSN 0867-2628. [Detail]

ZAVILA, Ondřej, Marian BOJKO, Jana JABLONSKÁ, Pavel DANIHELKA and Lenka MALÉŘOVÁ. Analýza šíření plynného NH3 ze zimního stadionu v případě malého a velkého havarijního úniku nástroji CFD. Ochrana ovzduší. Praha: Česká asociace pro prevenci znečišťování ovzduší, 2014, 26(1), p. 14-18. ISSN 1211-0337. [Detail]

OLIVKOVÁ, Ivana and Zuzana ŠVÉDOVÁ. Application of Multi-criteria Evaluation Method for the Selection of Check-in System in Urban Public Transport. Paripex - Indian Journal of Research. Paripex - Indian Journal of Research, 2014, 3(8), p. 37-40. ISSN 2250-1991. [Detail]

HRABOVSKÝ, Leopold. REALIZACE SKLÁPĚNÍ A ŘÍZENÍ ZDVIHOVÉHO MECHANISMU JEŘÁBU DERIKOVÉHO TYPU. Perners Contact. Pardubice: Univerzita Pardubice, 2014, 9(I / 2014), p. 80 - 90. ISSN 1801-674X. [Detail]

DRESLER, Pavel and Pavel ŠPERLICH. CREATION AND CALIBRATION OF COMPUTATIONAL MODEL OF THE HISTORIC RACE ENGINE. Perners Contact. Univerzita Pardubice, 2014, IX(4), p. 18-27. ISSN 1801-674X. [Detail]

FAMFULÍK, Jan, Jana MÍKOVÁ and Jaromír ŠIROKÝ. DESIGN OF ASL (ADVANCED SPACE LOCALISATOR). Perners Contact. Univerzita Pardubice, 2014, 4(9), p. 28-32. ISSN 1801-674X. [Detail]

HORŇÁČEK, Lukáš. DESIGN AND OPTIMALIZATION OF RACING CAR’S STEERING COLUMN. Perners Contact. Univerzita Pardubice, 2014, 37/2014(37/2014), p. 51-57. ISSN 1801-674X. [Detail]

KÁLLAI, Tibor. WHEEL SUSPENSION OF FORMULA STUDENT. Perners Contact. Univerzita Pardubice, 2014, 37/2014(37/2014), p. 58-65. ISSN 1801-674X. [Detail]

RICHTÁŘ, Michal and Jakub ŠMIRAUS. DESIGN OF ROAD VEHICLES COMPONENTS RESPECTING THE FUNCTIONAL SAFETY PRINCIPLES. Perners Contact. Univerzita Pardubice, 2014, 4(Volume IX, December 2014), p. 83-94. ISSN 1801-674X. [Detail]

CORSARO, Agnieszka, Tomasz WILTOWSKI, Dagmar JUCHELKOVÁ and Stanislav HONUS. Conversion of Syngas to LPG and Aromatics over Commercial Fischer-Tropsch Catalyst and HZSM-5 in Dual Bed Reactor. Petroleum Science and Technology. Philadelphia: Taylor & Francis, 2014, 32(20), p. 2497-2505. ISSN 1091-6466. [Detail]

CORSARO, Agnieszka, Tomasz WILTOWSKI and Dagmar JUCHELKOVÁ. The Conversion of Syngas to Liquid Fuels in a Dual-Bed Single Reactor Process. Petroleum Science and Technology. Taylor & Francis, 2014, 32(23), p. 2722-2729. ISSN 1091-6466. [Detail]

FAMFULÍK, Jan, Jana MÍKOVÁ, Martina LÁNSKÁ and Michal RICHTÁŘ. A stochastic model of the logistics actions required to ensure the availability of spare parts during maintenance of railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit. Volume 228. SAGE Publications Ltd, 2014, 228(1), p. 85-92. ISSN 0954-4097. [Detail]

ZAVILA, Ondřej, Marian BOJKO, Milada KOZUBKOVÁ, Pavel DANIHELKA and Lenka MALÉŘOVÁ. Aplikační možnosti metodiky SYMOS’97 versus CFD výpočtové kódy – výhody a omezení demonstrované na praktické studii. Rescue report. Brno: Siviliania, 2014, 2014(2), p. 40-42. ISSN 1212-0456. [Detail]

NOVÁK, Petr, Ján BABJAK, Tomáš KOT and Vladimír MOSTÝN. Control System Of A Heavy-duty Fire Extinguishing Mobile Robot. Robototechnika i techničeskaja kibernetika. Gosudarstvennyj naučnyj centr Rossijskoj Federacii, 2014, 4(3/2014), p. 25-29. ISSN 2312-6612. [Detail]

MONI, Vlastimil, Jan BLATA, Dariusz CYMERYS and Jan RIPEL. Practical application of the new MMM method in non-destructive testing. SGEM 2014 : 14th international multidisciplinary scientific geoconference : GeoConference on Ecology, Economics, Education and Legislation. Volume III, Environmental economics ... : 17-26, June, 2014, Albena, Bulgaria : conference proceedings. STEF92 Technology Ltd., 2014, 14(3), p. 451-456. ISSN 1314-2704. [Detail]

MONI, Vlastimil, Jaroslav GRAMAN, Lubomír DONÁT, Tomáš ŠKALOUD, Petr KLOUDA and František HELEBRANT. Optimisation possibilities of operetional duty of bucket teeth of wheel excavator. SGEM 2014 : GeoConference on Ecology, Economics, Education and Legislation : 17-26, June, 2014, Albena, Bulgaria : conference proceedings. Volume III, Exploration and mining mineral processing. STEF92 Technology Ltd., 2014, vol.III(14), p. 419-426. ISSN 1314-2704. [Detail]

VANĚK, Petr, Martin PROCHÁZKA, Iva KUDELOVÁ, František HELEBRANT and Ivan BÍLÝ. Technical diagnostics implementation into production process operational experiences. SGEM 2014 : GeoConference on Ecology, Economics, Education and Legislation : 17-26, June, 2014, Albena, Bulgaria : conference proceedings. Volume III, Exploration and mining mineral processing. STEF92 Technology Ltd., 2014, vol. III(14), p. 607-614. ISSN 1314-2704. [Detail]

ZAVILA, Ondřej, Marian BOJKO, Jan BITTA, Irena PAVLÍKOVÁ, Petr JANČÍK and Pavel DOBEŠ. Vliv komplexního terénu a meteorologických podmínek na šíření plynného polutantu ve velkoplošných oblastech – srovnávací matematická studie. SPEKTRUM. Ostrava: Sdružení požárního a bezpečnostního inženýrství, 2014, 14(1), p. 60-64. ISSN 1211-6920. [Detail]

FOJTÍK, František and Radim HALAMA. THE SCALAR, VECTOR AND TENSOR FIELDS IN THEORY OF ELASTICITY AND PLASTICITY. Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, 2014, LX(1), p. 13-21. ISSN 1210-0471. [Detail]

GU, Chengfan, Laszlo TOTH, Stanislav RUSZ and Miroslav BOVA. Texture induced grain coarsening in severe plastic deformed low carbon steel. Scripta materialia. Elsevier, 2014, 86(1), p. 36-39. ISSN 1359-6462. [Detail]

SCHWARZ, Drahomír and Ivo HLAVATÝ. Svařování plazmovým obloukem. Svět svaru. Hadyna International s.r.o., 2014, 1(1/2014), p. 7-11. ISSN 1214-4983. [Detail]

HLAVATÝ, Ivo. Řezání plazmou. Svět svaru. 2014, 1(1), p. 8-9. ISSN 1214-4983. [Detail]

CHYTKA, Petr and Ladislav HRABEC. Stick-slip efekt a tribotechnika (malý rozbor problému). Technická diagnostika. Asociace technických diagnostiků ČR, 2014, 23(1), p. 113-119. ISSN 1210-311X. [Detail]

MAREK, Vladislav and Ladislav HRABEC. Kaly v turbinových a hydraulických olejích - stanovení a jejich odstranění. Technická diagnostika. Asociace technických diagnostiků ČR, 2014, 23(1), p. 150-153. ISSN 1210-311X. [Detail]

ČADA, Radek and Petr TILLER. Evaluation of draw beads influence on intricate shape stamping drawing process. Technologické inžinierstvo. University of Žilina, 2014, 9(1), p. 5-10. ISSN 1336-5967. [Detail]

HONUS, Stanislav and Dagmar JUCHELKOVÁ. Mathematical Models of Combustion, Convection and Heat Transfer in Experimental Thermic Device and Verification. Tehnički vjesnik – Technical Gazette. Osijek: University of Osijek, 2014, 21(1), p. 115-122. ISSN 1330-3651. [Detail]

SADÍLEK, Marek, Jiří KRATOCHVÍL, Jana PETRŮ, Robert ČEP, Tomáš ZLÁMAL and Dana STANČEKOVÁ. Cutting tool wear monitoring with the use of impedance layers. Tehnički vjesnik – Technical Gazette. University of Osijek, 2014, 3(21), p. 639-644. ISSN 1330-3651. [Detail]

HLAVSOVÁ, Adéla, Agnieszka CORSARO, Helena RACLAVSKÁ, Dagmar JUCHELKOVÁ and Hana ŠKROBÁNKOVÁ. Syngas Production from Pyrolysis of Nine Composts Obtained from Non-Hybrid and Hybrid Perennial Grasses. The Scientific World Journal. New York: Hindawi, 2014, 2014(1 july 2014), p. 1-11. ISSN 1537-744X. [Detail]

HIMR, Daniel. NUMERICAL MODEL OF AIR VALVE FOR COMPUTATION OF ONE-DIMENSIONAL FLOW. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2014, LX(1), p. 29-38. ISSN 1210-0471. [Detail]

JABLONSKÁ, Jana, Matej PETROVIČ and Jiří KUKELKA. FLOW IN THE NON-RETURN FLAP. Transactions of the VŠB - Technical University of Ostrava, Mechanical Series. VŠB - Technická univerzita Ostrava, 2014, LX(1), p. 45-54. ISSN 1210-0471. [Detail]

CHYTKA, Petr and Ladislav HRABEC. Damoklův meč pomalých či akcelerujících pohonů. Tribotechnika. Techpark, o.z., 2014, 7(3), p. 54-57. ISSN 1338-0524. [Detail]

BOJKOVÁ, Martina, Pavel KLVAŇA, Pavel SVOBODA, Tomáš KUPKA, Marian BOJKO, Arnošt MARTÍNEK and Petr DÍTĚ. Pain in chronic pancreatitis and pancreatic cancer - Treatment options. Vnitřní lékařství. Czech Medical Association J.E. Purkyne, 2014, 60(3), p. 205-211. ISSN 0042-773X. [Detail]

KRAMOLIŠ, P. and Mojmír VRTEK. Solární chlazení pro pavilon tuleňů a tučňáků. Vytápění, větrání, instalace. Společnost pro techniku prostředí, 2014, 23(3), p. 112-114. ISSN 1210-1389. [Detail]

KRAMOLIŠ, P. and Mojmír VRTEK. Vliv stagnačních stavů na solární soustavy. Vytápění, větrání, instalace. Společnost pro techniku prostředí, 2014, 1(2), p. 81-86. ISSN 1210-1389. [Detail]

RACLAVSKÁ, Helena, Agnieszka CORSARO, Adéla HLAVSOVÁ, Dagmar JUCHELKOVÁ and Ondřej ZAJONC. The effect of moisture on the release and enrichment of heavy metals during pyrolysis of municipal solid waste. Waste Management and Research. SAGE Publications Ltd, 2014, 33(3), p. 267-274. ISSN 0734-242X. [Detail]

FRIES, Jiří, Tomáš HAPLA and Tomáš NEUMANN. Optimální parametry dobývací techniky pro konkrétní podmínky. Zpravodaj Hnědé uhlí. Výzkumný ústav pro hnědé uhlí a.s., 2014, 2014(3), p. 46-52. ISSN 1213-1660. [Detail]

Projects

2024

Code	Title	Start year	End year
FW10010202	Optimalizace návrhových a výrobních postupů vertikálních čerpadel s využitím moderních technologií	2024	2026
#52410451	Visegrad Scholarship Programme 2024	2024	2025
#52410500	Visegrad Scholarship Programme 2024	2024	2025
TS01020130	Výzkum a vývoj designu malých trubkových výměníků pro jejich integraci do strojních zařízení	2024	2025
0014/7/NAD/2024	Letní pobyt nadaných žáků na MOFO 2024	2024	2024
CIII-RS1812	Application of CAx technologies in smart production as a significant basis for the development of Industry 4.0 in small and medium-sized enterprises - connection between industry and higher education institutions through lifelong learning	2024	2024
	Podpora vzdělávání na vysokých školách v Olomouckém kraji	2024	2024

2023

Code	Title	Start year	End year
TN02000010	Národní centrum kompetence Mechatroniky a chytrých technologií pro strojírenství 2	2023	2028
TN02000012	Centrum pokročilých jaderných technologií II	2023	2028
	Božek Vehicle Engineering National Center of Competence (BOVENAC)	2023	2028
101112380	Hybrid energy storage system using post-mining infrastructure	2023	2026
CZ.01.01.01/01/22_002/0000325	Výzkum a vývoj aktivní části distribučního transformátoru	2023	2026
CZ.01.01.01/01/22_002/0000922	Výzkum a vývoj nárazníku kategorie L pro nákladní kolejové vozy s minimální dynamickou přijatou energií 70 kJ	2023	2026
NFP403601DPH2	Přeshraniční spolupráce systémů zdravotnické záchranné služby	2023	2026
TN02000010/013N	Úsporné technologie a materiály pro udržitelný rozvoj	2023	2026
TN02000054	Božek Vehicle Engineering National Center of Competence (FACME)	2023	2026
23-04724S	Výpočtové modelování tvárného porušování identických tvářených a tištěných kovových materiálů při ultra-nízko-cyklové únavě	2023	2025
23-05338S	Mechanické a strukturní vlastnosti 3D tištěné slitiny AlSi10Mg v závislosti na míře recyklace prášku	2023	2025
CK04000098	Systém pro podporu komplexní síťové časové koordinace spojů ve veřejné hromadné dopravě	2023	2025
CZ.01.01.01/01/22_002/0000526	Univerzální modulární drtič	2023	2025
FW06010775	Výzkum a vývoj produktivních nástrojů a technologií pro obrábění velmi přesných děr s definovanou integritou obrobeného povrchu	2023	2025
GA23-05372S	Povrchová a podpovrchová eroze způsobená vícenásobným dopadem kapek	2023	2025
TK05020009	Výzkum a vývoj senzorů pro plošné měření imisí v průmyslových areálech a energetických závodech	2023	2025
TK05020049	Inovativní výměník pro plynové kotle	2023	2025
TN02000051/003	Národní centrum kompetence polymerních materiálů a technologií pro 21 století. Termosetická směs s absencí povrchového odpařování aditiv při procesu povrchové úpravy formou nanášení tenkých kovových filmů.	2023	2025
	Využití neuronové sítě na zpracování vibračních signálů v rámci monitoringu procesu a predikce životnosti strojů a zařízení	2023	2025
12320087	Výměna studentů v rámci projektu Visegrad fund	2023	2024
52310262	Višegrádské stipendium 346 II. (2023 - 2024)	2023	2024
TK05020052	Nabíjecí stanice pro elektromobily z vn skrze distribuční transformátor	2023	2024
	Visegradské stipendium	2023	2024
	Visegradské stipendium	2023	2024
	Višegrádské stipendium 346 (2023 - 2024)	2023	2024
	Letní pobyt talentovaných dětí na MOFO 2023	2023	2023

2022

Code	Title	Start year	End year
52210926	Visegradské stipendium	2022	2023
52211138	Visegradské stipendium	2022	2023
CZ.01.1.02/0.0/0.0 /21_374/0027092	Vývoj rovnacího stroje trubek pro Prestar	2022	2023
CZ.01.1.02/0.0/0.0/21_374/0026694	Výzkum a vývoj inovativního osvětlovače pro on-line kontrolu výrobků kamerovými systémy	2022	2023
CZ.01.1.02/0.0/0.0/21_374/0027232	Katalytická mineralizační jednotka	2022	2023
0030/7/NAD/2022	Podpora nadaných žáků 2022 - LŠ a ZŠ MOFO	2022	2022

2021

Code	Title	Start year	End year
FW03010587	Vývoj nové řady svařovaných šoupátek pro průmysl, energetiku a návrh technologie výroby s využitím principů Průmyslu 4.0	2021	2024
304011AYI2	Podpora distančních metod v technickém vzdělávání	2021	2023
304011AYW8	Príprava a zavedenie vzdelávacích on-line výstupov pre strojárske odbory	2021	2023
CZ.01.1.02/0.0/0.0/20_321/0024786	Automatizace výroby zdravotnických prostředků	2021	2023
CZ.01.1.02/0.0/0.0/21_374/0026885	Prediktivní nástroj společnosti B&Bartoni, spol. s r. o. pro optimalizaci výrobních procesů	2021	2023
CZ.01.1.02/0.0/0.0/21_374/0027388	VÝZKUM A VÝVOJ PRODUKTIVNÍCH VYSTRUŽOVACÍCH NÁSTROJŮ A TECHNOLOGIÍ PRO OBRÁBĚNÍ VELMI PŘESNÝCH DĚR S BŘITY ZE SLINUTÝCH KARBIDŮ A CERMETŮ S NOVÝM PVD POVLAKEM	2021	2023
EG20_321/0024017	Energeticko-softwarová optimalizace hydraulických stanic nad 100 kW	2021	2023
EG20_321/0024388	Vývoj inteligentního distribučního transformátoru	2021	2023
EG20_321/0024559	Výzkum a vývoj osobního výtahu OT 450	2021	2023
EG20_321/0025234	3D tisk a obrábění dílů pro letecký průmysl z kompozitních materiálů, hliníkových a titanových slitin	2021	2023
EG21_374/0026387	Vývoj inovativní kogenerační jednotky spalující plyny s příměsí vodíku	2021	2023
FW03010345	Vývoj nové řady sekaček SPIDER s nástavbou pro lisování travní hmoty	2021	2023
	Implementace modulu virtuální reality	2021	2023
	Návrh a konstrukční úpravy karbonových částí ULL letounu Ellipse Spirit a příprava dokumentace pro certifikační proces v letecké výrobě	2021	2023
52110631	Visegradské stipendium	2021	2022
CZ.01.1.02/0.0/0.0/19_262/0020167	Virtuální dynamické modely pro simulaci rozsáhlých víceosých systémů v reálném čase	2021	2022
RPP2021/100	Aktualizace a tvorba materiálů pro výuku předmětů Povrchové úpravy a Konstrukční materiály	2021	2021
RPP2021/101	Studentský mobilní robot pro mezinárodní soutěže	2021	2021
RPP2021/23	Aditivní technologie	2021	2021
RPP2021/45	Únava materiálu II	2021	2021
RPP2021/60	Inovace předmětu 347-0329 - Experiment v částech strojů	2021	2021
RPP2021/96	Vytvoření studijního materiálu multimediálního charakteru pro experimentální část předmětu Mechanika tekutin	2021	2021
RPP2021/99	Modernizace výukových simulátorů a leteckého technického kabinetu	2021	2021

2020

Code	Title	Start year	End year
TK03030037	Akumulační vodní elektrárna nového typu	2020	2025
CK01000043	Systém pro podporu síťové časové koordinace spojů v přestupních uzlech	2020	2022
CK01000060	Prediktivní systém údržby vozidel	2020	2022
CZ.01.1.02 /0.0/0.0/1 9_264/0019830	Integrace modulu počítačové simulace do návrhového algoritmu 3D tištěných ortotických pomůcek	2020	2022
CZ.01.1.02/0.0/0.0/19_264/0019431	Optimalizace konstrukce deskového drtiče pro eliminaci přenášených vibrací	2020	2022
EG19_262/0019913	Vývoj progresivního systému pro numerickou simulaci fyzikálních procesů v plynárenských soustavách	2020	2022
RPP2020/79	Inovace předmětu 346-0508 - Nekonvenční metody obrábění	2020	2020
RPP2020/80	Skladovací systémy partikulárních látek	2020	2020
RPP2020/81	Inovace studijních materiálů pro předměty Kompresory, ventilátory a čerpadla a Parní turbíny	2020	2020
RPP2020/83	Inovace obsahové náplně cvičení z předmětu Právní normy v podnikání	2020	2020
RPP2020/84	Moderní obráběcí nástroje a upínací prvky	2020	2020
RPP2020/85	Model pro výuku návrhu regulačních obvodů	2020	2020
RPP2020/86	Inovace předmětu Logistika I	2020	2020
RPP2020/87	Praktické aplikace využití působících sil v zásobníku pro inovaci v předmětu Doprava a zpracování surovin	2020	2020
RPP2020/88	Robot pro účast na soutěžích	2020	2020
RPP2020/90	Inovace obsahové náplně přednášek a cvičení z předmětu Inovační a procesní management	2020	2020
RPP2020/91	Udržení konkurenceschopnosti absolventů na trhu práce zvýšením kvality výuky	2020	2020
RPP2020/92	Inovace a harmonizace studijních podkladů v oblastech organizace, řízení a provozu údržby strojů na základě ověřených výstupů z praxe a nové legislativy	2020	2020
RPP2020/93	Inovace obsahové náplně cvičení z předmětu Základy projektování	2020	2020
RPP2020/94	Statické a dynamické charakteristiky	2020	2020
RPP2020/95	Rozšíření výuky praktických cvičení předmětu Automatizační technika	2020	2020
RPP2020/96	Inovace předmětu studia Silniční vozidla I	2020	2020
	Podpora a rozvoj vysokoškolského technického vzdělávání v Olomouckém kraji	2020	2020

2019

Code	Title	Start year	End year
CZ.01.1.02/0.0/0.0/17_140/0015226	AD-TECH Centrum 3.0	2019	2022
FV40115	Vývoj nové řady středotlakých šoupátek, technologie jejich výroby a metodiky zkoušení, simulující 40 let životnosti	2019	2022
TN01000024	Národní centrum kompetence - Kybernetika a umělá inteligence, dílčí projekt Automatizace a optimalizace výrobních systémů	2019	2022
TN01000026	Národní centrum kompetence Josefa Božka	2019	2022
TN01000071	Národní centrum kompetence mechatroniky a chytrých technologií pro strojírenství	2019	2022
FV40022	Modulus IoT Tracker	2019	2021
FV40046	Mobilní diagnostický systém plunžrových čerpadel s bezdrátovou komunikací	2019	2021
FV40105	Vývoj a výroba prototypu vysokotlakého vřetenového čerpadla pro čerpání vysoce-viskózních hmot	2019	2021
FV40312	Inteligentní porodní lůžko pro automatické polohování a dynamickou mobilizaci rodiček	2019	2021
GA19-03282S	Vliv komplexních a cyklických módů zatěžování na životnost strojních součástí vyrobených metodou 3D tisku	2019	2021
GA19-06666S	Výzkum proudění a intertakce dvousložkových kapalin s tělesy a vnějším magnetickým polem	2019	2021
GJ19-22426Y	Vliv patologií na tvar pulzní vlny v tepnách a jejich nízkocyklovou únavu	2019	2021
LTAUSA18134	Výpočtově statistické hodnocení rizika ruptury aneurysmat abdominální aorty	2019	2021
TH04010282	Implementace vyšších forem řízení pro zvýšení adaptability simulačního nástroje pro modelování dopravních uzlů	2019	2021
TK02020060	Výzkum inovativní koncepce parogenerátoru pro kogenerační výrobu elektřiny u ZEVO s vyloučením chloridové koroze přehříváků páry a s možností akumulace elektrické energie	2019	2021
	Automatizace návrhu a zhotovení protézy dolní končetiny 3D tiskem - protetika 4.0	2019	2020
	Experimentální a numerický výzkum toroidních vírů	2019	2020
	Visegrádské stipendium	2019	2020
CIII-PL0901	Výuka a výzkum v pokročilé výrobě	2019	2019
CZ.01.1.02/0.0/0.0/18_198/0014695	AD-TECH Centrum 2.0	2019	2019
RPP2019/79	Inovace předmětu 346-0508 - Nekonvenční metody obrábění	2019	2019
RPP2019/80	Skladovací systémy partikulárních látek	2019	2019
RPP2019/81	Inovace studijních materiálů pro předměty Kompresory, ventilátory a čerpadla a Parní turbíny	2019	2019
RPP2019/83	Inovace obsahové náplně cvičení z předmětu Právní normy v podnikání	2019	2019
RPP2019/84	Moderní obráběcí nástroje a upínací prvky	2019	2019
RPP2019/85	Model pro výuku návrhu regulačních obvodů	2019	2019
RPP2019/86	Inovace předmětu Logistika I	2019	2019
RPP2019/87	Praktické aplikace využití působících sil v zásobníku pro inovaci v předmětu Doprava a zpracování surovin	2019	2019
RPP2019/88	Robot pro účast na soutěžích	2019	2019
RPP2019/90	Inovace obsahové náplně přednášek a cvičení z předmětu Inovační a procesní management	2019	2019
RPP2019/91	Udržení konkurenceschopnosti absolventů na trhu práce zvýšením kvality výuky	2019	2019
RPP2019/92	Inovace a harmonizace studijních podkladů v oblastech organizace, řízení a provozu údržby strojů na základě ověřených výstupů z praxe a nové legislativy	2019	2019
RPP2019/93	Inovace obsahové náplně cvičení z předmětu Základy projektování	2019	2019
RPP2019/94	Statické a dynamické charakteristiky	2019	2019
RPP2019/95	Rozšíření výuky praktických cvičení předmětu Automatizační technika	2019	2019
RPP2019/96	Inovace předmětu studia Silniční vozidla I	2019	2019
	Podpora a rozvoj vysokoškolského technického vzdělávání v Olomouckém kraji	2019	2019

2018

Code	Title	Start year	End year
01309/2019/RRC	Restaurátorská dílna	2018	2023
EF17_049/0008407	Inovativní a aditivní technologie výroby - nová technologická řešení 3D tisku kovů a kompozitních materiálů	2018	2023
TH04010416	Vývoj nové technologie zušlechťování ocelových pásů	2018	2022
EG17_107/0012469	Výzkum a vývoj inovovaných technologií pro mletí a drcení nerostných surovin	2018	2021
EG16_084/0010265	Výzkum inovativní koncepce technologie pro akumulaci elektřiny s vysokou účinností u decentrálních kogeneračních zdrojů	2018	2020
EG17_107/0012274	Nová generace digitalizovaných zkušebně testovacích systémů pro diagnostiku mechatronických systémů	2018	2020
	Výzkum a vývoj nové generace parkovacích asistentů	2018	2019
CIII-2017-BG0613	Nanotechnologie, materiály a nové výrobní technologie - univerzitní spolupráce ve výzkumu a implementace společných programů pomocí akademických mobilit	2018	2018

2017

Code	Title	Start year	End year
CZ.02.2.69/0.0/0.0/16_018/0002590	Tvorba doktorského studijního programu Dopravní systémy	2017	2022
	Inovativní a aditivní technologie výroby – nová technologická řešení 3D tisku kovů a kompozitních materiálů	2017	2022
CZ.02.2.67/0.0/0.0/16_016/0002506	Dobudování infrastruktury CPIT TL1 pro strategické studijní programy FS a FMMI VŠB-TUO	2017	2020
EG16_084/0010358	Výzkum a vývoj vícekomorového izolačního skla nového typu a jeho výroby	2017	2020
	Zkvalitnění technického vzdělávání formou praktické přípravy vycházející z reálných potřeb trhu práce	2017	2020
EG15_019/0004582	Vývoj univerzální technologie pro rozpojování, nakládání a zpevňování hornin na pásovém podvozku	2017	2019
FV20321	Vývoj odlehčovacích ortéz dolní končetiny s využitím digitálních technologií	2017	2018
CIII-2017-CZ0201	Znalostní most pro studenty a pedagogy ve výrobních technologiích	2017	2017
CIII-2017-FREEMOVERS	Freemovers	2017	2017
CIII-2017-HR0108	Konkurenční produkty a výzkum technologií - výuka, výzkum a implementace společných programů orientovaných na výrobní a průmyslové inženýrství	2017	2017
CIII-2017-RO0013	Výuka a výzkum enviro-orientovaných technologií v průmyslu	2017	2017
CIII-2017-RO0058	NÁVRH, ZAVEDENÍ A POUŽÍVÁNÍ SPOLEČNÝCH PROGRAMŮ MANAGEMENTU KVALITY VE VÝROBNÍCH TECHNOLOGIÍCH	2017	2017
CIII-2017-RO0202	Implementace a využití E-learningových systémů ve studijní oblasti výrobní inženýrství v regionu střední Evropy	2017	2017
RPP2017/183	Laboratorní úloha - Měření technických veličin pomocí bezdrátové technologie	2017	2017
RPP2017/188	Multimediální podpora výuky předmětu Výrobní dokumentace v systému CAD	2017	2017
RPP2017/191	Souosost zkušebních trhacích strojů	2017	2017
RPP2017/192	Inovace výuky v oblasti zkoumání mechanických vlastností materiálů po SPD využitím micro-tensile testů (M-TT)	2017	2017

2016

Code	Title	Start year	End year
	Supporting knowledge capacity of ICT among SME to engage in growth and innovation	2016	2021
FV10717	Vývoj nové řady kryogenních kulových kohoutů, technologie jejich výroby a zkoušení	2016	2018
RPP2016/107	Inovace předmětu Počítačové systémy	2016	2018
RPP2016/114	Podpora hostujících profesorů ve výuce katedry energetiky	2016	2018
RPP2016/118	Inovace předmětu Informační systémy ve strojírenství	2016	2018
RPP2016/84	Inovace předmětu Mechanika tekutin	2016	2018
RPP2016/87	Aerodynamika, konstrukce a systémy letadel 1, 3, 5	2016	2018
RPP2016/93	Inovace předmětu: 346 - 0302/05 (06) Nástroje	2016	2018
RPP2016/95	Aerodynamika vozidel	2016	2018
	Summer School of Energy	2016	2017
	UMOŽNĚNÍ ZAPOJENÍ VÝZKUMNÝCH ORGANIZACÍ DO EVROPSKÉ ALIANCE PRO ENERGETICKÝ VÝZKUM (EUROPEAN ENERGY RESEARCH ALLIANCE – EERA)	2016	2017
H3451603	PV-Czech,Siostrzonek,3721	2016	2016
RPP2016/120	Inovace předmětu Dynamika I	2016	2016
RPP2016/121	Konstrukce modelu inverzního kyvadla s více stupni volnosti	2016	2016
RPP2016/32	Vybavení laboratoře demonstračních modelů Katedry energetiky	2016	2016
RPP2016/88	Rozšíření základny upínacích prvků pro tvarově složité a rozměrné obrobky	2016	2016

2015

Code	Title	Start year	End year
_51501681	Zvýšení mechanických vlastností hliníkových slitin pomocí vícenásobné plastické deformace a tepelného zpracování	2015	2016
561821-EPP-1-2015-1-RS-EPPKA2-CBHE-JP	Waste management curricula develompent in partnership with public and private sector	2015	2015
FRVS2015/107	Inovace předmětu Části a mechanismy strojů 347-0304/01	2015	2015
FRVS2015/129	Podpora programování v oboru Aplikovaná mechanika	2015	2015
FRVS2015/147	Inovace předmětu Řízení pneumatických mechanizmů	2015	2015
FRVS2015/22	Inovace mnohorozměrové laboratorní úlohy nasazením prediktivního řízení a PC-based PLC systému.	2015	2015
FRVS2015/50	Tvorba vizuálních studijních podkladů pro předmět Základy strojnictví	2015	2015
FRVS2015/59	Tvorba montážních postupů 3D tiskárny a CNC frézky pro reálné ukázky aditivních způsobů výroby	2015	2015
FRVS2015/77	Inovace předmětu Technologie povrchového inženýrství 345-0508/05	2015	2015
FRVS2015/84	Inovace předmětu Ročníkový projekt II 346-0311/04	2015	2015

2014

Code	Title	Start year	End year
631117	Systém virtuální teleportace RESCUER pro inspekci uhelného dolu postiženého havárií.	2014	2017
TA04031296	Simulace a optimalizace interakce dopravních proudů v software Witness	2014	2016
51400792	Zvyšování mechanických vlastností zjemňováním struktury v procesu tváření Al slitinlit	2014	2015

2013

Code	Title	Start year	End year
TA03031079	OPTIM - Výzkum a vývoj SW řešení na optimalizaci svozů / rozvozů a nakládky na dopravní prostředky pro oblast dopravy, spedice a logistiky	2013	2015
TA03031271	Aktivní bezpečnostní systém pro prostorovou lokalizaci objektů mezi kolejovými vozidly a před jejich čely	2013	2015

2012

Code	Title	Start year	End year
TE01020020	Centrum kompetence automobilového průmyslu Josefa Božka	2012	2017

Research and development